ITX Case Headphone Stand by 9gel

Last crawled date: 3 years, 4 months ago

Using our ITX case as a headphone stand base. Looks good on the desk, and save space! The design of our case prevents us from putting stuff on top because it's for venting. It's perfect to hang a headphone. No need for a separate stand.
The design is modular, which means you can print the riser, hanger, and design your base.
Required hardware:
M4 x 20 flat head screw x 2 (for attaching the hanger to the base)
M4 nut x 2
M5 x 20 flat head screw x 3 (for attaching riser to the base)
M5 nut x 3
Screws to attach the base to the case. Mine is two M3 x 10 screws attached to the back of the case
Instructions:
Print "ITX case headphone stand hanger"
Print "ITX case headphone stand riser"
Design and print your base with 3 M5 screw holes - the "Metalfish headphone stand base 1"/2 files very likely won't fit your ITX case. The files are here for your reference. The screw holes are arranged in a triangle:
The back two screws are 108mm apart
The front screw is 100mm measured perpendicular from the line connecting the two back screw hole

Connect the hanger with the riser with two M4 screws
Connect the riser with the base with three M5 screws
Attach the base to the case; or leave the base stand-alone
TODO:
Add a generic base
Make a customizable base for any ITX case