Thingiverse
Invertrix by tonyyng
by Thingiverse
Last crawled date: 3 years ago
Based heavily on the original thing (thanks Phredie), I flipped the object so that I could mount the flight controller on top, making the USB port accessible after assembly.
The inverted configuration means that the motors don't form the landing gear.
I also made it wider so that my batteries could fit under the flight controller.
These are the batteries I use: http://www.banggood.com/Syma-X5-15-X5C-3_7V-600MAH-Upgrade-Battery-Meal-p-941261.html. (Same size as the stock packs)
The inverted configuration means that the motors don't form the landing gear.
I also made it wider so that my batteries could fit under the flight controller.
These are the batteries I use: http://www.banggood.com/Syma-X5-15-X5C-3_7V-600MAH-Upgrade-Battery-Meal-p-941261.html. (Same size as the stock packs)
Similar models
thingiverse
free
efxtra flight controller mount by Diymik
...ht this would fit my efx racer, but it does not.
it may fit the efxtra, but i dont know.
i will re-design this for the efx racer.
thingiverse
free
Volantex TrainStar Ascent 747-8 Battery Tray by tobstare
...controller and
i use a wing fc-10 flight controller and have provided holes for the usb port and the flight controller. (30x30mm)
thingiverse
free
30x30 Flight controller mount with battery strap slot by Laroktheblock
...ot by laroktheblock
thingiverse
30x30 flight controller mount with battery strap slot
see part printed out https://goo.gl/mu9ylg
thingiverse
free
M3 Washer for Flight Controller by Wicket
...t my flight controller with so i made some. should be printed in soft flexible material to dampen vibration to flight controller.
thingiverse
free
Hovership MHQ Cam Deck with Viewport for KK2.1 Mini Flight Controller by RobertCL
... it's quicker to move the battery, change some settings and pop the battery back on that it is to remove the whole top plate.
thingiverse
free
Lego Technic Control Center battery cover by tecdroid
...er battery cover by tecdroid
thingiverse
i just got a technic control center but sadly, it has no battery cover. so i cloned it
thingiverse
free
Omnibus Flight Controller Case by Martinrome
... and needed a simple case i could mount with double-sided tape. there are two covers depending on what type of pins you install.
thingiverse
free
GE220 replacement 5mm spacer (FC screw holes removed) by kerst
...have to poke out the bottom of the frame and and have the battery sit on them. and so you can use shorter screws to mount the fc.
thingiverse
free
LED controller battery clip by Kaas205
...
thingiverse
so i designed this spare part for the battery insinde my led controller so you never have to worry about losing it!
thingiverse
free
battery retainer for Sport Cub RC airplane by tc_fea
...have flight tested this through hard maneuvers and it works.
i could have tried velcro, but the battery is hanging upside down.
Tonyyng
thingiverse
free
Vacuum Attachment Brush Coupler by tonyyng
...s mostly gone.
i printed this in petg, 100% infill, with no supports.
123d file included if you want to make any modifications.
thingiverse
free
Mini Whoop Motor Sizer by tonyyng
...p_frame_0.25margin.stl
0.40 = miniwhoop_frame_0.4margin.stl
avoids doing a long print to find out it doesn't fit your motors.
thingiverse
free
18650 Fatshark case - remixed by tonyyng
...rt that inserts into the body a little thicker. i found this was fragile.
slit added so the leds are visible through the opening
thingiverse
free
Stack Splint for Mallet Finger Injury by tonyyng
... supports (touching buildplate)
this was designed for my right pinkie finger. scale it as needed or modify the 123d design file.
thingiverse
free
Wall-e LED Utility Light by tonyyng
...good.com/search/xt-60-male.html
nut (for tripod mount): 1/4-20 nut (1/4 inch diameter, 20 threads per inch) - any hardware store