Thingiverse
Inverted vee FPV 120deg antenna holder RG316 1.2GHz by visualus
by Thingiverse
Last crawled date: 3 years ago
This is a holder/jig to build a inverted vee antenna using RG316 cable.
I recommend printing 105/110% for thicker cable.
For building FPV 1.2GHz antenna I used the following from RCG:
Empirically, the proper element length (already compensating for the degradation factor) comes out to: Length in inches = 2715/f in MHz - or - Length in mm = 69200/f in MHz
I recommend printing 105/110% for thicker cable.
For building FPV 1.2GHz antenna I used the following from RCG:
Empirically, the proper element length (already compensating for the degradation factor) comes out to: Length in inches = 2715/f in MHz - or - Length in mm = 69200/f in MHz
Similar models
thingiverse
free
Inverted Vee Antenna Jig 1.2-1.3GHz by StuntDouble
...e or even 24 awg silicon wire.
there are 6 of the common 1.2-1.3ghz frequencies to choose from: 1200/1240/1258/1280/1320/1360 mhz
thingiverse
free
Inverted Vee antenna base by AndreyPrikupets
... inverted vee antenna. there are two versions - big and small. melt antenna beams and cable into plastic with hot soldering iron.
thingiverse
free
Biquad Antenna FPV 1.2GHz by StuntDouble
...28260-diy-biquad-11dbi-antenna-tutorial%21
the sketchup file is available to download if you wish to make your own modifications.
thingiverse
free
For antennas with a freq from 868 to 1200 MHz by sa64
... and vee
others are -https://www.cgtrader.com/3d-print-models/hobby-diy/electronics/for-antennas-dipole-and-vee-freq-868-1200-mhz
grabcad
free
UHF 433,92 Mhz inverted V antenna
...uhf 433,92 mhz inverted v antenna
grabcad
a simple inverted v antenna for 433 mhz, 50 ohm
cg_trader
$3
For antennas dipole and vee freq from 868 to 1200 MHz | 3D
...dipole and vee freq from 868 to 1200 mhz | 3d
cg trader
for assembling vibrators antennas with a frequency from 868 to 1200 mhz
thingiverse
free
Clover Leaf 1.2Ghz / 1.3Ghz Antenna Holder by viper1990
...r by viper1990
thingiverse
made for ibcrazys' clover leaf antenna for fpv transmission. built for 3 leafs at 45 degree angle
thingiverse
free
Vee antenna for Skywalker by celiktse
...tenna chasis; one is for skywalker carbon tail, other one is for everywhere.
skywalker version just put it in place very nicely.
thingiverse
free
IBCrazy 1.3GHz Inverted Vee Antenna Mount by jeffwinder
...nverted vee antenna. design has 4 large holes for either bolts or to supply a foot-hold for hot gluing into a foam wing as shown.
grabcad
free
Planar Inverted 'F' (PIFA) 434 MHz UHF ISM band Antenna
...s the uhf ism band. this band is the most common throughout the world and is probably the most accepted ism band internationally.
Visualus
thingiverse
free
Filament helper wheel by visualus
...simple rotary wheel to help extruder to rotate the filament spool in efficient way.
i just glued it to the box with hot glue gun.
thingiverse
free
Vinyl cover holder by visualus
...element.
should work with up to double lp covers, for more thicker album covers should be enforced/holder hole should be widened.
thingiverse
free
e3d v6 integrated fan with proxy 18mm by visualus
...this is my remix to join integrated fan layer with sensor holder 18mm.
maybe does not look best but it was quick and dirty design
thingiverse
free
Vinyl cover holder - 2/3LP version by visualus
....com/thing:1937789) prepared to keep 2-3lp albums.
9mm+ of effective cover width.
enjoy & please share your "made"s
thingiverse
free
Z-probe holder 12mm for lama3d by visualus
...ts12-05n-1 0..5mm 50mm length)
all credits to theinspektorgadget, i've only lowered it by more than 3cm
x,y offset unchanged.
Rg316
thingiverse
free
Cloverleaf antenna by 1karcio
...wire, rg316 some pla note: default hole is for rg316 but you can easily edit stl file and change...
thingiverse
free
5,8 GHz antenna cover for cloverleaf/skew-planar by millerii
...installation in antenna assembly phase. cable support for size rg316 and...
thingiverse
free
Dipole antenna center T-case by DzikuVx
...thingiverse t-case for diy rc dipole antenna. designed for rg316 coax cable and 3mm antenna tubes, but will fit...
thingiverse
free
Sputnik antenna mounts by btnewman
...a sputnik micro quadcopter ( http://sputnikfpv.com/product/sputnik-117-frame-kit/ ) it hold rg316 as well as dual receiver antennas. it is only...
thingiverse
free
Cable, shrink tube guillotine by prodrone
...custom cutting length every 5mm. for easy cutting cables (rg316 and shrink tubes. only you will need short metal...
thingiverse
free
CoaxShark Wire Stripper (with pencil sharpener blade)
...was looking to remove the outer shell from some rg316 cable and had no good tool laying around... but...
thingiverse
free
Taranis X9D Plus Antenna Mod by Davinci_Lab
...the antenna! this is very important thing! requirements : rg316 cable with rp-sma jack connector(strongly recommended) 5dbi antenna(swr value...
thingiverse
free
Dipole Antenna Jig 1.2-1.3GHz by StuntDouble
...antenna wire with a width of approx. 1.6mm and rg316 coax cable. the antenna wire can be something like...
thingiverse
free
Inverted Vee Antenna Jig 1.2-1.3GHz by StuntDouble
...antenna wire with a width of approx. 1.6mm and rg316 coax cable. the antenna wire can be something like...
2Ghz
thingiverse
free
700mw DX video transmitter mounting case, for Quadcopters by pwnstar89
...connection during a crash. it should fit this transmitter: http://www.dx.com/p/16-ch-1-2ghz700mw-wireless-av-transmitter-receiver-set-dc-12v-112131#.vj-ca14aq ...
thingiverse
free
Astroprint Set for Monoprice Maker Select Plus by ericwe67
...a shorter mount to reduce required desk depth. pi3: https://www.amazon.com/raspberry-model-a1-2ghz64-bit-quad-core/dp/b01cd5vc92 microsoft lifecam 3000: https://www.amazon.com/microsoft-t3h-00011-lifecam-hd-3000/dp/b005bznekm astroprint: https://www.astroprint.com/ octoprint: http://octoprint.org/ optional...
thingiverse
free
Yahboom RGB Cooling Hat + OLED Raspberry Pi 4 Case by JISpal01
...4 1gb model (my temperature testing mule) overclocked to 2ghz i found the temperature was stable at 62 degrees...
thingiverse
free
Raspberry Pi 4 Mini Desktop Case - Ice Tower Cooler + Secondary PCB Cooling Fan by JISpal01
...(soc temp) with my pi 4 4gb overclocked to 2ghz with minimal difference (within the significant digits margin) between...
thingiverse
free
Raspberry Pi 4 Slim Set Top Box - X862 + Ice Tower + GeeekPi Set Top Expansion Board by JISpal01
...left the slot open on the case. on a 2ghz overclocked pi4, this case maintained a stable temperature of...
cg_trader
$119
T-GeN JiTNA 6
...t-gen jitna 6 cg trader nvidia k1,(4x 2ghz true hd ips+ capacitive touchscreen, 16m colors,1440 x 2560...
3dwarehouse
free
asusZ99
...asusz99 3dwarehouse portable 2go 2ghz / 4 photos - dessous 1 2 / dessus...
3dwarehouse
free
OUTDATED PAP- 20' PowerBook G4
...g4 3dwarehouse this laptop has a 20' screen, a 2ghz powerpc g4 processor, and 4gb ram. so its pretty...
3dwarehouse
free
Esperanto Vi 6
...esperanto vi 6 3dwarehouse with t-gen moai (quad-core 2ghz 21mpx full hd camera, 5,3' fullhd ips+ panel, 64gb...
3dwarehouse
free
Notebook Asus Z53Ka
...z53ka 3dwarehouse ein asus z53ka mit amd turion x2 (2ghz, 2048 mb ram, ati hd2600 (512mb), 160 gb sata...
120Deg
thingiverse
free
120deg tape measure noaa satellite antenna by killowatt
.... this antenna uses tape measure elements and should fit any pipe or stick smaller than 33.5mm (1 in pvc) by using longer screws.
thingiverse
free
Mount for Mini CMOS Camera 520TVL by cuppo4
...by cuppo4 thingiverse hobbyking mini cmos fpv camera 520tvl 120deg field of vision 0.008lux 17x17x24mm mount for hovership mhq2...
thingiverse
free
Tektronix 2465 Fan Collet by li_gangyi
...o-scope 4 variants available, all of them are split 120deg apart (instead of the stock 4 90 deg split)....
thingiverse
free
Fan holder and sample cooling for E3D v6, Robotdigg effektor, Kossel by Teilchen
...metal effector (ø28mm mounting holes). fans are arranged at 120deg angle to fit the dc42 differential ir height sensor....
thingiverse
free
Delta version of e3d v5 fan holder by tpex
...tested with on large print of 140x130mm and the 120deg angles of the holder do a good job of...
thingiverse
free
Articulated Arms Build System by IamSLy
...in each direction hinge : composed of 3 elements 120deg deflection in each direction arms tripod base base elements...
thingiverse
free
repstrap pieces by dissidence
...with out any trouble. it is also at a 120deg so that with this one you will only need...
thingiverse
free
Napkin Ring and Knurled Knob Customizer by Edak
...for the rotary dial on my printer, it's got 120deg twists and 8-sides. 12.7mm wide, 17mm long and has...
thingiverse
free
DJI FPV Digital Radio transmitter RP-SMA Holder Plug TPU
...and re recommend a dji x-air 5.8ghz at 10dbi 120deg directional antenna or using singularity 5.8ghz antenna at 1.3dbi....
Vee
turbosquid
$50
VEE
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
Hum Vee
...ee
turbosquid
royalty free 3d model hum vee for download as on turbosquid: 3d models for games, architecture, videos. (1246450)
turbosquid
$10
Flying vee
...bosquid
royalty free 3d model flying vee for download as max on turbosquid: 3d models for games, architecture, videos. (1323186)
turbosquid
$9
Vee planter
...y free 3d model vee planter for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1165401)
turbosquid
$15
EBC Vee Rotor Brake Disc
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
mclaren artura
...layout, where the two turbochargers are placed in the vee of the engine. power is sent to the rear...
3d_export
$6
r2-d2 robot 3d print model
...credited as consultant for the force awakens; however, jimmy vee also co-performed the character in some scenes. vee later...
3d_export
$50
hovercraft-sk5
...as the patrol air cushion vehicle or pacv (pronounced pac-vee, it was a derivative of the british srn5 that...
thingiverse
free
vee block by ronniebelmar
...lock
when printing, rotate 90 degrees from preview. use a large brim. chamfer allows for easy removal and will not leave a lip.
thingiverse
free
Machinist Vee Block by cdunk002
...tty cute...
the vee block 2.0 has the square slot that i forgot to add to the model previously. pick which one you like!
thanks!
Inverted
turbosquid
free
Inverter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
inverter model
...uid
royalty free 3d model inverter model for download as fbx on turbosquid: 3d models for games, architecture, videos. (1190633)
3d_export
$20
Technical Park Inverter
...technical park inverter
3dexport
technical park inverter (loop fighter)
turbosquid
$5
AC Inverter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Inverted Pentagram 3D Model
...inverted pentagram 3d model
3dexport
inverted pentagram
inverted pentagram 3d model roadkiller79 55651 3dexport
turbosquid
$36
DC-AC INVERTER
...model dc-ac inverter for download as max, obj, fbx, and sldpr on turbosquid: 3d models for games, architecture, videos. (1466093)
3d_export
$5
Iris Inverted Tiffany Pendant 3D Model
...tiffany pendant 3d model
3dexport
iris inverted tiffany pendant lamp
iris inverted tiffany pendant 3d model droog 100630 3dexport
3d_export
$5
inverter welding machine
...ene in the unreal, created in real sizes and ready to play. all textures are created in substance painter and have 4k resolution.
turbosquid
$4
Inverted Exclamation web icon
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Dale Tiffany Garden Leaf Inverted Fixture Pendant 3D Model
...t
dale tiffany garden leaf inverted fixture lamp
dale tiffany garden leaf inverted fixture pendant 3d model droog 100623 3dexport
Fpv
turbosquid
$1
FPV VTX Antenna
...e 3d model fpv vtx antenna for download as obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1230317)
3d_export
$9
Fpv logo 3D Model
...onogram vehicle part of auto transport 3d model logo emblem detailed high quality badge
fpv logo 3d model rmodeler 59628 3dexport
3d_export
$8
dji fpv battery slot holder
...er for 3 dji fpv batteries. holds perfectly without shaking. need 1 m3 countersunk head bolt. need to print 6 pin, 1 case, 1 cap.
3d_export
$10
fpv camera hd 700tvl
...aterials are logically named<br>the main format is in 3ds max 2009.<br>satisfcation garranteed..<br>thank you !
thingiverse
free
FpV Mount (SOPORTE FPV) by elborjas1987
...fpv mount (soporte fpv) by elborjas1987
thingiverse
this is a fpv mount with the same holes of naza base.
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
FPV DRONE ROOSTER DJI FPV PART
...fpv drone rooster dji fpv part
thingiverse
fpv drone rooster dji fpv install part
thingiverse
free
FPV monitor
...tml?rmmds=myorder&cur_warehouse=cn
link for download : https://cults3d.com/fr/mod%c3%a8le-3d/divers/fpv-monitor-ecran-fpv-faf
thingiverse
free
FPV receiver mount for FPV display by petrex
...eceiver mount for fpv display by petrex
thingiverse
aomway receiver mount for field view 777 fpv monitor. with small cable tray.
Antenna
archibase_planet
free
Antenna
...chibase planet
antenna aerial television antenna
antenna kathrein n090913 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Antenna
...antenna
archibase planet
satellite antenna
antenna 1 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Antenna
...antenna
archibase planet
equipment satellite antenna
antenna 2 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Antenna
...ntenna
archibase planet
satellite antenna equipment dish aerial
antenna 3 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Antenna
...antenna
archibase planet
satellite antenna dish dish aerial
antenna 4 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Antenna
...e planet
antenna dish dish aerial
antenna c-band satellite s180-g n210612 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
3d_export
$5
car antenna
...car antenna
3dexport
car antenna, antenna, car gadgets
turbosquid
$1
antenna
...rbosquid
royalty free 3d model antenna for download as blend on turbosquid: 3d models for games, architecture, videos. (1655786)
3d_export
free
Station with antenna
...station with antenna
3dexport
station with antenna
turbosquid
$5
Antenna
...id
royalty free 3d model antenna for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1381532)
Holder
archibase_planet
free
Holder
...holder
archibase planet
holder toilet paper holder
holder paper n070712 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...e planet
holder rack toilet paper holder
holder toilet roll n240715 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pen holder support prop
pen holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pole post holder
сhurch cross pole holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder bathroom ware
shower holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...oilet paper holder
holder paper devon&devon; time black n241113 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 7 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder towel rack towel-horse
holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...lder
archibase planet
holder hanger hanger for towel
holder towel n250912 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
1
turbosquid
$69
armchairs(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
ring 1+1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
chair(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Chair(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
RING 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
house 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Table 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$59
Formula 1(1)
...lty free 3d model formula 1 for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1567088)
design_connected
$11
No 1
...no 1
designconnected
sibast no 1 computer generated 3d model. designed by sibast, helge.
turbosquid
$2
desert house(1)(1)
...3d model desert house(1)(1) for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1055095)