intensewalkera Hague MMC mini motion cam / steadycam - GoPro / Contour / small Generic cam adapter V3 Final by IntenseDef

Last crawled date: 2 years, 12 months ago

Hague MMC mini motion cam / steadycam - GoPro / Contour / small Generic cam adapter V3 Final
Anyone with a Hague steadycam will know how hard it is to get these smaller cameras balanced. this lifts the COG and allows more weight to be added to the camera and therefore makes it easier to balance.
for my GoPro in the case, i added 4 of the large weights to the topside and balanced it with two large weights on the bottom.
To assemble
You need a standard 1/4 inch whitworth nut, glued in the btm half.
Glue an M5 boltx10mm-15mm in the middle section (bolt head on the underside)
3.Glue and install the middle piece.
select the required top camera interface and glue in place using the tabs as guides.
install required weights and hold in place with an M5 nut
screw on top of hague steadycam and balance as needed
ive supplied a GoPro top, Contour Roam top and a generic top.
the generic top is supplied with two holes to allow for anyone that needs an offset, it also comes with a finger wheel, that can be used on a 1/4 inch whitworth bolt( glued in place) to be used to attach to a standard camera mount.
ive only made the Gopro version, but ive used the Contour layout on other camera mounts and i know it works.
any feedback is appreciated as to if any issues arise with them, like i say ive only made an pre V3 version, which i modified for the better to make this one.
i hope it helps