Thingiverse
inside cabinet door flip-up cookbook shelf by chuckv3
by Thingiverse
Last crawled date: 3 years ago
I wanted something to keep a cookbook or tablet at eye level when cooking. This design folds flat against the inside of a cabinet door (I have one which swings out near my usual work area). The "hinges" connect with turkey-lacing pins cut to the right length and with a small jag at the end so they hold when forced in. The pins I get are about 10cm in length so two equal-length halves meet in the middle block for each hinge (4 pins or rods total). Any other steel rod or pin about 1.5mm in diameter will also work. Upper pins were about 6cm each and lower were about 8cm each.
If you want to try to use the lower inside groove of your cabinet door to catch the back of the tray, you might not need to print the catches.
Parts were attached using #6 screws. 3/8" or 1/2" will work since the pieces are about 1/4" thick.
Note: added a hollow back for those who might want that.
If you want to try to use the lower inside groove of your cabinet door to catch the back of the tray, you might not need to print the catches.
Parts were attached using #6 screws. 3/8" or 1/2" will work since the pieces are about 1/4" thick.
Note: added a hollow back for those who might want that.
Similar models
thingiverse
free
Apache Camper Cabinet Hinge by GearNut
...hinge for plastic cabinet doors.
print 2. i used a 1/8" pop-rivet and washer as the hinge pin.
glue on door with abs cement.
thingiverse
free
3D Printer Enclosure Door Hinge
... there are no plastic zits inside the hole of the bottom half and around the pin on the top one to avoid binding.
happy printing!
thingiverse
free
Functioning Door Tile by SocraticSculpture
...i to do it again, i would:
1) print the lintel separately
2) use a much finer raft, or no raft at all.
3) not print the door pin.
thingiverse
free
Glad Trash Box Cabinet Mount by ktron9000
...ws might be ideal, but i was able to get it to work with 1/2" with it only pushing through a little bit on the cabinet door.
thingiverse
free
ordbot spool holder by Seadevil
...eaded rod.
you will need to use support material when you slice the _rt_pin. i use 20% infill "linear" on each part.
thingiverse
free
Parameterized Medium Duty Hinge by buildchimp
...is parameterized (via openscad), so you should be able to adjust the hinge, fastener, and pin sizing to your heart's content.
thingiverse
free
Hinge Square 40x40 by ahmetanil
...n, i left 0.3mm tolerance (normally a lot) but depend on the printing quality, you might need to rasp or you can use a metal pin.
thingiverse
free
Door Retaining Catch (remix) - flush mount by shannim5
...ut a gap to keep any mice out. this worked great with the zacsimmo's "extremely weak clamp female side only" part.
grabcad
free
Double Action Hinge
...en i was in class, so i drew one on apiece of paper, and now it's on solidworks.
i hope you enjoy it !
leave a "♥"
thingiverse
free
Wall door knob protector plus door catch by toguan
...bout it. it does work. i prefer the fixed arm to hold the door open.
hope someone finds it useful, ...and have a good day,
bill
Chuckv3
thingiverse
free
blank plate cover by chuckv3
... plate cover by chuckv3
thingiverse
basic wall plate with no holes. if you need one of a different size please comment or email.
thingiverse
free
Mexican Train pieces by chuckv3
...giverse
train station for 26x52mm dominoes, and then small no-support-needed train pieces that you can print in multiple colors.
thingiverse
free
Belt Hanger by chuckv3
... hangs in your closet, and you put your belts on it. if you have belts wider than 2 inches / 45mm, this won't work for those.
thingiverse
free
Soma puzzle pieces by chuckv3
...y chuckv3
thingiverse
i had soma cubes as a kid, and when i got comfortable with my 3d printer, this was the first thing i made.
thingiverse
free
USB Cable Holder by chuckv3
...o put this on the edge of your work surface, so you can keep your usb cables attached and ready to go (and not lost on the floor)
thingiverse
free
Clips by chuckv3
...ed over the folded ends of something like a dog-food bag (for the large clip). the photo is the small clip, printed in black abs.
thingiverse
free
Kindle stand by chuckv3
... the angle.
i also added a slightly smaller one for 10th-gen kindle (waterproof type without the taper around the bottom buttons)
thingiverse
free
6mm thick banana hanger by chuckv3
...ana hanger by chuckv3
thingiverse
i've broken two of my previous design so i decided to increase the height from 4mm to 6mm.
thingiverse
free
Guitar Pick by chuckv3
... the intersection of three cylinders then chamfering of the edges.
my wife will be able to try this out shortly printed with abs.
thingiverse
free
Leviton single-switch plate by chuckv3
...itch, so i measured it all out to replace an existing switch plate. this is for a leviton type switch (the wide and shallow type)
Cookbook
3ddd
$1
Classic Cookbooks
...set a kitchen centerpiece.
all books have custom jackets designed and printed by juniper books on tear and water resistant paper.
3d_export
$8
healthy cookbooks
...d in it.<br>support :<br>if you have any questions, please feel free to contact us.<br>thank you for purchasing
3d_sky
$8
Classic Cookbooks
...set a kitchen centerpiece. all books have custom jackets designed and printed by juniper books on tear and water resistant paper.
thingiverse
free
Cookbook stand by TheoKooijmans
...ok stand by theokooijmans
thingiverse
a nice cookbook stand which can't be found anywhere!
i printed it in different colors!
thingiverse
free
Cookbook Stand by MinerGeek
...and is pretty stable, even with our very largest cookbooks, i am thinking about making a wider version, for some extra stability.
thingiverse
free
iPad Adapter for Cookbook Stand by MAKERFAM
... lean it up against, but it slides off.... idea + tinkercad + replicator = ipad holder for cookbook stand about 30 minutes later!
thingiverse
free
Cookbook Bookend by kendel3d
...this was printed solid on its side in pla. it is 3.2mm thick. you might need to use a brim to get it to stick to your printbed.
thingiverse
free
Kitchen Ipad/recipe book holder by Jaroni
...mess by picking up or handling your ipad or cookbook while your hands may be covered in flour or...
thingiverse
free
Simple Book Marks by njerry05
...i wanted something to mark the pages in my cookbook so i made this...
Flip
design_connected
$13
Flip
...flip
designconnected
poliform flip chairs computer generated 3d model. designed by carlo colombo.
3ddd
$1
Flip
...p
3ddd
flip , foscarini
настенный светильник.
высота - 31см
ширина - 28см
глубина - 13см
design_connected
$13
Flip Around
...flip around
designconnected
menu flip around computer generated 3d model. designed by norm.
design_connected
$18
Flip armchair
...flip armchair
designconnected
poliform flip armchair computer generated 3d model. designed by colombo, carlo.
3d_export
$10
Carveli flip
...carveli flip
3dexport
turbosquid
$5
Flip Knife
...turbosquid
royalty free 3d model flip knife for download as on turbosquid: 3d models for games, architecture, videos. (1320007)
3d_export
$15
flip knife
... knife
3dexport
a 3d modelled, low poly flip knife made by me in blender. formats include: .obj, .stl, .ply, .fbx, .dae and .mtl
turbosquid
$10
Flip Flops
... free 3d model flip flops for download as blend, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1612271)
3ddd
$1
Flip-Top table
...flip-top table
3ddd
стол
стол системы flip-top. 1600х700
turbosquid
$60
Flip Clock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Shelf
3d_ocean
$6
Shelf
...shelf
3docean
furniture shelf
a lowpoly shelf .
turbosquid
$7
Shelf
...helf, bookshelf,cafe shelf,decor, for download as max and ige on turbosquid: 3d models for games, architecture, videos. (1427685)
archibase_planet
free
Shelf
...shelf
archibase planet
shelf rack glass shelf
shelf - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Shelf
...shelf
archibase planet
shelf rack glass shelf
shelf - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_ocean
$3
Shelf
...shelf
3docean
shelf
a high quality shelf with high resolution texture
3d_export
$5
shelf
...shelf
3dexport
shelf
3d_export
$5
Shelf
...shelf
3dexport
shelf
archibase_planet
free
Shelf
...shelf
archibase planet
shelf shelving glass shelf
shelf 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Shelf
...shelf
archibase planet
shelfs shelving bookshelf
shelf - 3d model for interior 3d visualization.
archibase_planet
free
Shelf
...shelf
archibase planet
shelf shelving bookcase
shelf - 3d model for interior 3d visualization.
Inside
design_connected
$11
Insider
...insider
designconnected
jacco maris insider computer generated 3d model. designed by maris , jacco.
turbosquid
$5
House Inside
...uid
royalty free 3d model house inside for download as blend on turbosquid: 3d models for games, architecture, videos. (1379540)
3ddd
$1
Inside Divan
... garcia
om website: beltafrajumar.com
designer: rafa garcía, miguel ángel garcía
formats: 3ds, c4d, fbx, obj
turbosquid
$30
Inside a bus
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$45
Hourglass with water inside
...free 3d model hourglass with water inside for download as obj on turbosquid: 3d models for games, architecture, videos. (1195673)
turbosquid
$12
The Inside Square Pouf
...e 3d model the inside square pouf for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1333171)
turbosquid
$39
Toy Inside 004
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
Toy Inside 010
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
Toy Inside 009
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
Toy Inside 008
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Cabinet
3d_ocean
$5
Cabinet
...cabinet
3docean
cabinet furniture
a lowpoly cabinet .
3d_ocean
$5
Cabinet
...cabinet
3docean
cabinet furniture
a lowpoly cabinet.
3d_ocean
$5
Cabinet
...cabinet
3docean
cabinet furniture
a lowpoly cabinet .
3d_ocean
$6
Cabinet
...cabinet
3docean
cabinet furniture
a high quality cabinet .
3d_ocean
$5
Cabinet
...cabinet
3docean
cabinet furniture
a high quality cabinet .
3d_ocean
$5
Cabinet
...cabinet
3docean
cabinet furniture
a high quality cabinet ready to use .
3ddd
free
cabinet
...cabinet
3ddd
cabinet
3d_ocean
$12
Cabinet
...cabinet
3docean
cabinet furniture
a high quality cabinet with high quality textures.
3ddd
$1
cabinet
...cabinet
3ddd
тумба
cabinet
3ddd
$1
The cabinet
...the cabinet
3ddd
тумба
the cabinet
Door
3d_export
$5
door handle of doors
...door handle of doors
3dexport
door handle of doors
3d_ocean
$4
Door
...3docean
architecture door gate gothic door old style door
door, 3d door, gothic door, architecture, old style door, gate, 3d gate
3d_ocean
$10
Door
...door
3docean
design door doors home house indoor interior opening doors
door design
archibase_planet
free
Door
...r
archibase planet
door sliding door interior door rail door
door n250515 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Door
...door
archibase planet
door sash door sash-door interior door
door 900 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Door
...door
archibase planet
door sash door sash-door interior door
door 600 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Door
...door
archibase planet
door sash door sash-door interior door
door 800 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Door
...door
archibase planet
door sash door sash-door interior door
door 800 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Door
...door
archibase planet
door sash door sash-door interior door
door 700 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Door
...door
archibase planet
door sash door sash-door interior door
door 600 - 3d model (*.gsm+*.3ds) for interior 3d visualization.