Thingiverse
Indy Revolver Mods by rkxone
by Thingiverse
Last crawled date: 3 years, 4 months ago
A few mods for the great indy revolver model here: https://www.thingiverse.com/thing:2921031
I have included bullets that will fit the cylinder, (you may need to sand down your cylinder post a little if you have not left it adjustable.
I have also included 2 spacers to allow the cylinder/arm to be functional. for this to work you had to have removed the pushrod from the barrel and left it on it's own to allow the cylinder arm to still move.
Use the spacer that best suits you, I used the large one,
how to set this up:
1- put in something to space out the spacer into the hole on the bullpup arm.
2- put in the large spacer
3- apply glue to the end of the spacer
4- insert the bullpup arm with the spacer in it into the channel on the receiver so that the spacer and glue attach to the receiver
5- let it dry completely
6- with the normal print friction this is all that is needed, my spacer acts as a post to keep the arm in place
7- insert the Extractor rod into the arm and into the cylinder (you can glue it or friction fit, I leave it friction fit.
Optional, you can put the other spacer into the cylinder arm hole and drill out a small hole through the arm. then you can remove the short spacer and connect the cylinder arm to the newly installed spacer via an m3 bolt and this will secure the arm (but it can create other issues if you don't widen the drilled hole on the arm to allow free movement, For me I left it free so I could work on it and replace any parts that break
The bullets all fit the cylinder stock, while they move ok I moved that arm a tad so that it revolved nicely. you could also shave off some of the cylinder post that attaches to the cylinder arm. All 6 bullets print without any support, and in about 1 hour. adds some nice realism to the original prop.
Files:
large spacer: to be glued to the receiver
small spacer: can be used to space the spacer in the arm
mod bullet: the bullet that fits the cylinder
Enjoy! If you enjoy my prints please consider donating, even a dollar helps :) it's always appreciated :) https://www.paypal.me/RychardK
I have included bullets that will fit the cylinder, (you may need to sand down your cylinder post a little if you have not left it adjustable.
I have also included 2 spacers to allow the cylinder/arm to be functional. for this to work you had to have removed the pushrod from the barrel and left it on it's own to allow the cylinder arm to still move.
Use the spacer that best suits you, I used the large one,
how to set this up:
1- put in something to space out the spacer into the hole on the bullpup arm.
2- put in the large spacer
3- apply glue to the end of the spacer
4- insert the bullpup arm with the spacer in it into the channel on the receiver so that the spacer and glue attach to the receiver
5- let it dry completely
6- with the normal print friction this is all that is needed, my spacer acts as a post to keep the arm in place
7- insert the Extractor rod into the arm and into the cylinder (you can glue it or friction fit, I leave it friction fit.
Optional, you can put the other spacer into the cylinder arm hole and drill out a small hole through the arm. then you can remove the short spacer and connect the cylinder arm to the newly installed spacer via an m3 bolt and this will secure the arm (but it can create other issues if you don't widen the drilled hole on the arm to allow free movement, For me I left it free so I could work on it and replace any parts that break
The bullets all fit the cylinder stock, while they move ok I moved that arm a tad so that it revolved nicely. you could also shave off some of the cylinder post that attaches to the cylinder arm. All 6 bullets print without any support, and in about 1 hour. adds some nice realism to the original prop.
Files:
large spacer: to be glued to the receiver
small spacer: can be used to space the spacer in the arm
mod bullet: the bullet that fits the cylinder
Enjoy! If you enjoy my prints please consider donating, even a dollar helps :) it's always appreciated :) https://www.paypal.me/RychardK
Similar models
cg_trader
$16
Revo bullpup heavy revolver
...cylinder away and rotate it to chamber next round. small handle bellow cylinder allows to move it fully way for removing purpose.
thingiverse
free
Cattleman Bullet by njary
...e printed mine and sanded them so they friction fit flush and the chamber can still spin and you can push them out with a rod etc
thingiverse
free
iPad large tablet stand by rochertian
...acers press into the legs, it is a tight fit. i had to drill out the leg holes with a 9/64" drill bit to allow them to fit.
thingiverse
free
Samsung Tv Mounting Spacers by NakedAndGordo
... on your printer you may not have to do this but if you do be very careful and use a vice or vice grips to hold the large spacer.
thingiverse
free
T-800 Terminator Arm 1:1 by KnightwithouthFilament
...les i didn't premade the hole.
edit : added the elbow with a 20mm diameter hole inside so the arm can be showed on a stick.
thingiverse
free
Drill/Can Blender by j8arone
... you will also need machine screws and nuts to attach the clips. use acetone or gorilla glue to attach the clips to the cylinder.
thingiverse
free
Gameboy Color GBC-101 Spacers by gameboyjunky
...gn centered to the shell screw hole. i created different spacers with holes in different places to help match up with screw post.
3dwarehouse
free
Colt Revolver Cylinder and Bullets
...r cylinder and bullets
3dwarehouse
colt revolver cylinder and bullets (drawn with sketchup 8) #bullets #colt #cylinder #revolver
thingiverse
free
Goex on pills mod for Checkmate A1500 by olf_2021
...ic spacers into two of the original holes of the bay, then i had to drill one extra hole in order to fit the goex included wedge.
thingiverse
free
gb22 revolver by dav88
...ame a bit.
i included a step file so you can make changes in your cad program.
i included a cylinder with bigger hole by request.
Rkxone
thingiverse
free
Militech by rkxone
...militech by rkxone
thingiverse
militech sign
for more of my wall art: https://www.thingiverse.com/rkxone/collections/wall-art
thingiverse
free
Avengers Bookmark by rkxone
...kxone
thingiverse
avengers bookmark
check out my other bookmarks here: https://www.thingiverse.com/rkxone/collections/bookmarks
thingiverse
free
Atari Bookmark by rkxone
...y rkxone
thingiverse
atari bookmark
check out my other bookmarks here: https://www.thingiverse.com/rkxone/collections/bookmarks
thingiverse
free
Viper Bookmark by rkxone
...y rkxone
thingiverse
viper bookmark
check out my other bookmarks here: https://www.thingiverse.com/rkxone/collections/bookmarks
thingiverse
free
Ghostbusters Bookmark by rkxone
...e
thingiverse
ghostbusters bookmark
check out my other bookmarks here: https://www.thingiverse.com/rkxone/collections/bookmarks
thingiverse
free
Punisher Bookmark by rkxone
...kxone
thingiverse
punisher bookmark
check out my other bookmarks here: https://www.thingiverse.com/rkxone/collections/bookmarks
thingiverse
free
Shadowrun Bookmark by rkxone
...kxone
thingiverse
shadowrun bookmark
check out my other bookmarks here: https://www.thingiverse.com/rkxone/collections/bookmarks
thingiverse
free
Shadowhunter Bookmark by rkxone
...e
thingiverse
shadowhunter bookmark
check out my other bookmarks here: https://www.thingiverse.com/rkxone/collections/bookmarks
thingiverse
free
Stormtrooper Bookmark by rkxone
...e
thingiverse
stormtrooper bookmark
check out my other bookmarks here: https://www.thingiverse.com/rkxone/collections/bookmarks
thingiverse
free
Biotechnica Sign by rkxone
...hingiverse
biotechnica sign from cyberpunk 2077
for more of my wall art: https://www.thingiverse.com/rkxone/collections/wall-art
Indy
turbosquid
$19
Indie Patchwork Carpet
...odel indie patchwork carpet for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1250292)
3d_export
$50
Indy Storm 3D Model
...ort
octan indy storm lego 8445 set game fun construct technic tech play formula f1 car
indy storm 3d model essence 30205 3dexport
cg_studio
$99
Maserati Indy 19693d model
....max .obj .mb .lwo .fbx .c4d .3ds - maserati indy 1969 3d model, royalty free license available, instant download after purchase.
turbosquid
$5
Indie Viking Sword
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
A simple toilet for an indie game
...an indie game
3dexport
a simple toilet bowl for an equally simple game, such as an indie game. or for something desing bathroom.
3d_ocean
$89
Maserati Indy 1969
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
archive3d
free
garuesi INDY 3D Model
...garuesi indy 3d model
archive3d
3d_export
$40
Octan Indy Racer 3D Model
...del
3dexport
octan indy racer lego 8440 set game fun construct technic tech play
octan indy racer 3d model essence 17896 3dexport
3d_export
$99
Maserati Indy 1973 3D Model
...etro 1973 1974 italian italy supercar interior maserati maseratti 4900 indy 4700
maserati indy 1973 3d model squir 93850 3dexport
cg_studio
$99
Maserati Indy 19733d model
...io
.lwo .fbx .c4d .3ds .obj .max - maserati indy 1973 3d model, royalty free license available, instant download after purchase.
Revolver
turbosquid
$10
revolver Revolver
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Revolver Stylized revolver
...revolver stylized revolver
3dexport
revolver, stylized revolver lowpoly game ready verticles: 425,378 faces: 424,065
3d_export
$10
revolver
...revolver
3dexport
revolver
3d_export
$10
Revolver
...revolver
3dexport
revolver
3d_export
$5
Revolver
...revolver
3dexport
revolver ciberpunk
3d_export
$7
revolver
...revolver
3dexport
great black revolver for yours project.with materials
3d_export
$5
revolver
...revolver
3dexport
a highly polygonal model for your use. classic revolver.
3d_ocean
$12
Revolver
...apon wesson
smith & wesson model 686 revolver lowpoly model game ready 4096x and 2048x textures moving parts bullets included
3d_ocean
$12
Revolver
... easy to work with, and very easy to animate any part you want. low poly (1647 poly – 1563 verts) 2048×2048 resolution (jpeg) ...
turbosquid
$49
Revolver
...urbosquid
royalty free 3d model revolver for download as max on turbosquid: 3d models for games, architecture, videos. (1327203)
Mods
design_connected
$13
MOD. 4233 - MOD. 4234 Table Lamp
...mod. 4233 - mod. 4234 table lamp
designconnected
arcahorn mod. 4233 - mod. 4234 table lamp computer generated 3d model.
design_connected
$11
MOD.1095
...mod.1095
designconnected
mod.1095 computer generated 3d model. designed by sarfatti, gino.
3ddd
$1
fireplaces mod Spec
...fireplaces mod spec
3ddd
камин
fireplaces mod spec 180x90x125h
3ddd
free
Flos Mod. 2129
... mod
фабрика: flos
модель: mod. 2129
описание: подвесной светильник, металл, белый, черный.
сайт: www.flos.com
turbosquid
$34
Mod Lamp.c4d
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$32
MOD A 001
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Maars Mod
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Mod 70..
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
MOD Sofa
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Mod-Lite
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.