Thingiverse
![IN-12b Nixie Tube Socket by ab5566](/previews/8341440.jpg)
IN-12b Nixie Tube Socket by ab5566
by Thingiverse
Last crawled date: 3 years, 2 months ago
Tube socket that fits over pins of IN-12b sowjet nixie tube.
Do not attempt to bend the pins of IN-12 nixie tubes because the glass will shatter.
The holes are close fit to the pins but the socket should slide over the pins easily.
Before printing with SLA make the holes approx 0.3mm smaller or they will be too loose.
Do not attempt to bend the pins of IN-12 nixie tubes because the glass will shatter.
The holes are close fit to the pins but the socket should slide over the pins easily.
Before printing with SLA make the holes approx 0.3mm smaller or they will be too loose.
Similar models
thingiverse
free
![Socket for IN-14 nixie tubes by jtsiomb](/t/8037259.jpg)
Socket for IN-14 nixie tubes by jtsiomb
...s://www.ebay.co.uk/itm/50pcs-nixie-vfd-tube-socket-female-pin-for-in-14-in-16-in-19-qs18-12-qs16-ys13-3/174283555500 (see photo).
thingiverse
free
![IN-12 Nixie socket by earlynerd](/t/8555093.jpg)
IN-12 Nixie socket by earlynerd
.... heat from a soldering iron seats the pins the rest of the way, and locks them in. the tube helps make sure they go in straight.
thingiverse
free
![IN-12B Nixie Tube Storage Tray](/t/4703638.jpg)
IN-12B Nixie Tube Storage Tray
...thingiverse
this is a storage tray designed to hold 12 in-12 nixie tubes. each compartment is 30.5mm x 20.5mm x 20mm in height.
thingiverse
free
![Nixie tube socket for 4 IN-12s and 2 IN-2s by heming3501](/t/8293124.jpg)
Nixie tube socket for 4 IN-12s and 2 IN-2s by heming3501
... tube socket for 4 in-12s and 2 in-2s by heming3501
thingiverse
requires a soldering iron to melt the tube mating pins in place.
thingiverse
free
![IN-12 Nixie Socket by Chris0z](/t/8960386.jpg)
IN-12 Nixie Socket by Chris0z
...in-12 nixie socket by chris0z
thingiverse
for in-12 nixie tubes
thingiverse
free
![Nixie IN12 Socket](/t/4833633.jpg)
Nixie IN12 Socket
...sockets) pins. when you get them off, you should drill them with 1mm bit. then just put them in printed socket, and there you go.
thingiverse
free
![7 pin tube socket with 22 AWG leads by nicholaskrautner](/t/8088860.jpg)
7 pin tube socket with 22 AWG leads by nicholaskrautner
...ug fit. i would suggest soldering leads to components before attaching them to the socket. let me know if you have any questions.
thingiverse
free
![Nixie IN-8 Breadboard Socket by StriggityStrack](/t/8196311.jpg)
Nixie IN-8 Breadboard Socket by StriggityStrack
...d and run on fine quality. i cleaned up the holes with a small needle and then everything fit perfect. i hope this helps someone.
thingiverse
free
![IN-18 IN-4 Socket by iiiytn1k](/t/8877568.jpg)
IN-18 IN-4 Socket by iiiytn1k
....
original drawings from: http://www.nocrotec.com/shop/product_info.php/info/p36_in-18-in-4-nixie-tube-socket-with-blue-leds.html
thingiverse
free
![IN-18 Nixie Tube PL31p Socket Mounts by jefferoonie](/t/8538697.jpg)
IN-18 Nixie Tube PL31p Socket Mounts by jefferoonie
...perimentation, and possibly building the final device.
the single block is about 1mm thicker, and the mounting holes are smaller.
Ab5566
thingiverse
free
![Tube Socket Photomultiplier Valvo FE1112 by ab5566](/t/8369664.jpg)
Tube Socket Photomultiplier Valvo FE1112 by ab5566
...t photomultiplier valvo fe1112 by ab5566
thingiverse
fe1112 socket for photomultipliers branded valvo. tested on xp2011 / xp2012
thingiverse
free
![GY6 Side stand switch rotor replacement by ab5566](/t/8149979.jpg)
GY6 Side stand switch rotor replacement by ab5566
... side stand switch breaks often. this replacement part should fit 1:1.
please print with support as shown in one of the pictures.
thingiverse
free
![NEW Skeletonized Safegrabber super stable fast print by ab5566](/t/5107016.jpg)
NEW Skeletonized Safegrabber super stable fast print by ab5566
... claw is super stable in direction of the mechanical load.
print time is only 50 minutes while printing slow.
i hope you enjoy.
12B
thingiverse
free
![mandala-12b by green_long](/t/8246536.jpg)
mandala-12b by green_long
...mandala-12b by green_long
thingiverse
replica
pla 1.75, 0.4, 222, 60
all free
thingiverse
free
![Windshield Frame for a #Matchbox 12B Land Rover by ReadTheFactoryManual](/t/5026055.jpg)
Windshield Frame for a #Matchbox 12B Land Rover by ReadTheFactoryManual
...frame for a #matchbox 12b land rover by readthefactorymanual
thingiverse
this is a windshield for a matchbox no. 12b land rover.
thingiverse
free
![X-12B by velite234](/t/9061895.jpg)
X-12B by velite234
...nch with the same fuel the x-12b uses:
http://www.youtube.com/watch?v=tiawvwgtbzu
not very impressive, but it was a lot of fun xd
thingiverse
free
![Wall mount for Fluke 12B Multimeter by Plastman](/t/8631419.jpg)
Wall mount for Fluke 12B Multimeter by Plastman
...wall mount for fluke 12b multimeter by plastman
thingiverse
this mount keeps the fluke multimeter in place on the wall.
thingiverse
free
![Z-12B by morris_lan](/t/8693411.jpg)
Z-12B by morris_lan
...no support structure in between the model. therefore you will only have to clean up the supports that hold the wing and fuselage.
thingiverse
free
![IN-12B Nixie Tube Storage Tray](/t/4703638.jpg)
IN-12B Nixie Tube Storage Tray
...thingiverse
this is a storage tray designed to hold 12 in-12 nixie tubes. each compartment is 30.5mm x 20.5mm x 20mm in height.
thingiverse
free
![M4 Evo Silencer LT-12B-G2 Lancer Tactical by PhoenixBeer](/t/8025860.jpg)
M4 Evo Silencer LT-12B-G2 Lancer Tactical by PhoenixBeer
...on 3d files for mods. also included just the silencer part as a short silencer.
i printed it in tpu filament.
no supports needed.
thingiverse
free
![ADIMLab Gantry Z-Axis Linear Rail Block for MGN-12B Linear Rail](/t/4673596.jpg)
ADIMLab Gantry Z-Axis Linear Rail Block for MGN-12B Linear Rail
...er pulley mounting and bolt everything together using the factory bolts from the wheels. no wheels required on inner rail either.
thingiverse
free
![Vlad the Impaler by RubbishMud](/t/8793896.jpg)
Vlad the Impaler by RubbishMud
...a raft under because of free parts without background 4b-12b is jigsaw, print one after the other for a...
Nixie
thingiverse
free
![Nixie clock by erwan1](/t/9033392.jpg)
Nixie clock by erwan1
...nixie clock by erwan1
thingiverse
case for my nixie clock.
thingiverse
free
![Nixie base for nixie chess set](/t/4754491.jpg)
Nixie base for nixie chess set
... winding process.
this got to be frustrating enough that i designed this model as a one-piece substitute for the bobbin assembly.
thingiverse
free
![Projet affichage Nixie by AlbertKarlen](/t/8726496.jpg)
Projet affichage Nixie by AlbertKarlen
...projet affichage nixie by albertkarlen
thingiverse
affichage pseudo nixie
thingiverse
free
![IN-12 Nixie Socket by Chris0z](/t/8960386.jpg)
IN-12 Nixie Socket by Chris0z
...in-12 nixie socket by chris0z
thingiverse
for in-12 nixie tubes
thingiverse
free
![Nixie watch](/t/4869905.jpg)
Nixie watch
...ematics and the code at instructables and changed it to my needs. the processor is a small arduino mini and the tubes are zm1325.
thingiverse
free
![Nixie clock case by Scald](/t/8905010.jpg)
Nixie clock case by Scald
...nixie clock case by scald
thingiverse
custom nixie clock case
thingiverse
free
![Nixie Tube card by catherineh](/t/9003829.jpg)
Nixie Tube card by catherineh
...nixie tube card by catherineh
thingiverse
a customizable card with light-up nixie tubes
thingiverse
free
![Caja Reloj Nixie IN-14 by jorgepas](/t/8251906.jpg)
Caja Reloj Nixie IN-14 by jorgepas
...caja reloj nixie in-14 by jorgepas
thingiverse
reloj nixie in14, clock nixie in14
https://youtu.be/hiezgzoqiza
thingiverse
free
![Case for TubeClock Nixie Clock by mightyohm](/t/9061426.jpg)
Case for TubeClock Nixie Clock by mightyohm
... case for the tubeclock in-14 6 tube nixie clock kit: http://www.store.tubeclock.com/index.php/nixie-tube-clocks/nixie-clock-kits
thingiverse
free
![EL Nixie by hudson](/t/9058598.jpg)
EL Nixie by hudson
... perhaps someone else can improve upon it. details about the project: http://www.nycresistor.com/2011/10/15/el-wire-nixie-tubes/
Socket
thingiverse
free
![Socket](/t/4774668.jpg)
Socket
...socket
thingiverse
this is a socket to mount lights on
thingiverse
free
![SOCKET by MadMan327](/t/8939764.jpg)
SOCKET by MadMan327
...socket by madman327
thingiverse
socket
thingiverse
free
![G23 socket](/t/4765237.jpg)
G23 socket
...g23 socket
thingiverse
g23 socket
thingiverse
free
![Sockets plugs](/t/4648015.jpg)
Sockets plugs
...sockets plugs
thingiverse
sockets plugs
thingiverse
free
![Socket Adapter](/t/4876151.jpg)
Socket Adapter
...socket adapter
thingiverse
hand twist socket adapter
thingiverse
free
![Socket tray](/t/4731060.jpg)
Socket tray
...
tray for 1/4in sockets and quick connect bits.
i have had success at .12layer height, with 30% grid infil, and 3x barrier lines.
thingiverse
free
![Socket Organizer by reeshan](/t/9228154.jpg)
Socket Organizer by reeshan
...socket organizer by reeshan
thingiverse
socket holder for for 8mm to 30mm socket
thingiverse
free
![Socket Holder for 1/2" sockets by Flyinghigh707](/t/8530126.jpg)
Socket Holder for 1/2" sockets by Flyinghigh707
...socket holder for 1/2" sockets by flyinghigh707
thingiverse
0.5" socket holder..am working on getting more holders in
thingiverse
free
![Electric socket](/t/4936773.jpg)
Electric socket
...lectric socket to hold a shelly wifi relay.
had a spare kopp socket and a shelly.
now i can turn on/off my printer remotely, yay!
thingiverse
free
![Fancy Socket by DesignYourFuture](/t/8976753.jpg)
Fancy Socket by DesignYourFuture
...fancy socket by designyourfuture
thingiverse
a socket
Tube
thingiverse
free
![tubes by](/t/8793783.jpg)
tubes by
...tubes by
thingiverse
tube time
thingiverse
free
![Edrio Two Tubes (Tubes) by Sidejoebob](/t/8253339.jpg)
Edrio Two Tubes (Tubes) by Sidejoebob
...edrio two tubes (tubes) by sidejoebob
thingiverse
tube for the edrio two tubes helmet
thingiverse
free
![Tube Racks](/t/4648714.jpg)
Tube Racks
...tube racks
thingiverse
tube racks for 15ml & 50ml falcon tubes and 20mm round-bottom tubes
thingiverse
free
![A tube squeezer for aluminum tubes by joergkrause](/t/8778732.jpg)
A tube squeezer for aluminum tubes by joergkrause
...rinted with pla. no support required. suitable for tubes up to 50mm
update 03.07.2018 better version uploadet. tube squeezer2.stl
thingiverse
free
![Tube by williandb](/t/8033283.jpg)
Tube by williandb
...tube by williandb
thingiverse
tube
thingiverse
free
![tube by shvanmajd](/t/8720290.jpg)
tube by shvanmajd
...tube by shvanmajd
thingiverse
tube
thingiverse
free
![Tube by vovkachuk](/t/8945257.jpg)
Tube by vovkachuk
...tube by vovkachuk
thingiverse
tube
thingiverse
free
![tube by baramon](/t/8986395.jpg)
tube by baramon
...tube by baramon
thingiverse
tube
thingiverse
free
![Sliding tube cap or tube foot for 0.85" OD tube by DBQGrips](/t/8884370.jpg)
Sliding tube cap or tube foot for 0.85" OD tube by DBQGrips
...f a tube leg to assist in sliding across the floor.
this was designed for 0.85" od tube but can be scaled for similar sizes.
thingiverse
free
![Tubing straightener (4,8mm tubes)](/t/4872841.jpg)
Tubing straightener (4,8mm tubes)
... brake lines for example).
all you need is 8x 608 ball bearing, 8x m8 screw and 8x m8 nut.
print list:
2x body
8x roller
1x shims