Thingiverse
illinWhoop by illinvillainfpv
by Thingiverse
Last crawled date: 3 years, 4 months ago
▐▐▐ UPDATE: Version 2 now released ▐▐▐
Version 2 release notes:
I originally made the v2 version, as the v1 would not accept 76mm props without first trimming down the props slightly. So v2 has larger ducts which can handle 76mm props. I also wanted to include a channel for installing led strips to light up the ducts. V2 has a nice groove that perfectly fits led strips, and a snap in cover you print, which can also be used to stiffen the duct when printed in a rigid filament.
Happy flying my friends!
This is a remix of the ThunderFPV cinewhoop. I have modified the ducts and frame, and included custom parts for arm braces, camera mount, immortal T antenna holder, sma mount, and fpv camera bumper.
2 options when printing this yourself.
1) print main frame/body in PETG/Carbon Fiber Polymer/etc along with top plate. Everything else in TPU.
2) print main body in TPU Then also print additional arm bracing that is held by screws in center stack screws, motor screws, and 2 small zip ties on each duct. Print these arm braces and top plate out of PETG/Carbon Fiber Polymer/etc. This interlocking bracing system stiffens up the TPU nicely, while still being very durable. If these arms do break, replacement is easy without disassembly.
Version 2 release notes:
I originally made the v2 version, as the v1 would not accept 76mm props without first trimming down the props slightly. So v2 has larger ducts which can handle 76mm props. I also wanted to include a channel for installing led strips to light up the ducts. V2 has a nice groove that perfectly fits led strips, and a snap in cover you print, which can also be used to stiffen the duct when printed in a rigid filament.
Happy flying my friends!
This is a remix of the ThunderFPV cinewhoop. I have modified the ducts and frame, and included custom parts for arm braces, camera mount, immortal T antenna holder, sma mount, and fpv camera bumper.
2 options when printing this yourself.
1) print main frame/body in PETG/Carbon Fiber Polymer/etc along with top plate. Everything else in TPU.
2) print main body in TPU Then also print additional arm bracing that is held by screws in center stack screws, motor screws, and 2 small zip ties on each duct. Print these arm braces and top plate out of PETG/Carbon Fiber Polymer/etc. This interlocking bracing system stiffens up the TPU nicely, while still being very durable. If these arms do break, replacement is easy without disassembly.
Similar models
thingiverse
free
RaceWhoop V2 by shangoo
...nd nuts to put it all together.
props go out to freezillion https://www.thingiverse.com/thing:4608171 for inspiring this project.
thingiverse
free
Mavic Pro Legs by Empiricus
...by empiricus thingiverse mavic pro legs. version 1 is similar to the original part. version 2 and 3 legs...
thingiverse
free
3Dprint cap opener by SheepsFeaTheR
...ilament of carbon fiber, there is no problem with pla and abs etc.
the belt part uses a cheap tpu filament, but it slips a little
thingiverse
free
AirBlade Intrepid 3 Pro Upgrade to IntreWhoop
...e duct and gopro mount are tpu-printed. the duct support is printed with pla or harder material, ideally cnc out of carbon fiber.
thingiverse
free
Geetech G2S Stiffening Brace by MostWestern
...e shaft diameter is 7.68mm. flip these upside down before printing to put the recess for the washer on to and mirror two of them.
thingiverse
free
Armattan ChameleonTi Standard GoPro Mount by David125
...rbon fiber plate with this 3d printed plate
print in petg or abs for maximum realibility
use longer 3mm screws
minimum infill 50%
thingiverse
free
tbs discovery mod 25mm carbon fiber arms by dsastrealb
...t 2mm carbon fiber rods on this pieces on the 2.5 mm holes provided for maximum strength.
find the solidworks assembly attached.
thingiverse
free
Eachine Wizard X220S Arm Protection
...eachine wizard x220s arm protection
thingiverse
print in tpu or petg, replaces the leds
thingiverse
free
QAV210 top plate by mwjcp1
...s but it has the tendency to crack during crashes.
added v2 for extra strength during crash. this version seems to be bomb proof.
thingiverse
free
Ender 3 V2 Bullseye LED Strip Holder by tphoenix_131
...this holder
you need 2 screws m2x20 and 2 nuts m2 to mount the holder together with the radial ventilator onto the bullseye duct.
Illinvillainfpv
thingiverse
free
illin balance saver by illinvillainfpv
...verse
a simple solution to chopped up balance leads. tuck balance lead in one end, and tuck the other end under the lipo strap.
thingiverse
free
Balance lead saver by illinvillainfpv
...s under the lipo strap. this protects balance lead from prop strikes.
print as-is for 4s, stretch width in slicer to 120% for 6s
thingiverse
free
Custom Parts for iFlight XL5, XL6, XL7 by illinvillainfpv
...o a lower jaw, front bumper, fpc camera holder, that goes nicely with the skull gopro mount, and protects your fpv camera nicely.