Ikea Samla 5L simple and modular hanger shelf system by matthys_kenneth

Last crawled date: 3 years, 1 month ago

I have an Ikea LACK table 55x55cm as a base for my printer enclosure. And I wanted something cheap to put some containers under the table to be used as storage/litterbin.
So I designed this simple yet functional system to go with the Samla storage boxes from Ikea.
In the end I decided to go with 4 pcs of 5 liters (28x19x14 cm/5 l)
Because I didn't find anything that was already pre-made I decided to upload my design and create something a little more modular then strictly my own needs.
Al pieces fit together with dovetail joints.
There is some opening when using the width spacers, but the depth spacer is a nice snuggly fit. I haven't corrected the width because of my failed prints on the dovetail joints.
The space allowed me to easily correct the joints with some pliers and still made it useable.
Everything is printable for this system.
Only the screws for mounting it to the underside of a table will need to be added.
I made sunken holes for 4mm wood screws.
For my 2x2 setup I used 7 screws, but it will work with less.
As far as the modularity of this system.
You can choose for 1 or 2 boxes in height, but should be able to go as wide as you want.