IKEA Lack assemblies (v1) by LeChaletDuMaker

Last crawled date: 3 years, 1 month ago

UPDATE 2017 09 12 :
First return of experience showed that getting the plexiglass captive on the mount isn't a great idea. I have refactored the printing by cutting the outside border : hence the plexiglass is simply layed on the internal border; a simple 3mm drilling allows the plexi walls to be held by 6 screws and bolt.
I think i'll remix the projet to get 4 doors, remixing door holder part and door stop part together.
Will remix the design later, if nobody plans to do it. I can share my Fusion360 project if needed
With this assembly you could be able to
-put 5mm plexiglass walls and doors, (that would require little work on each plexiglass elements to fit, depending on your final choice)
-(optional) 2 Ikea Lack tables head-to-tail assembly, allowing a resulting 90cm (80cm usable) height enclosure !
-(optional) shelf support for the left 29cm previous option.
For the walls and door system :
2 x Door's Pivot.stl
4 x Rear Corner.stl
1 x Front corners w door holder.stl
1 x Z/symetrical Front corners w door holder.stl
1 x Front corners w door stop.stl
1 x Z/symetrical Front corners w door stop.stl
If you wanna assemble 2 lacks tables upside down and get a 80cm enclosure height :
2 x mid height rear assembly.stl
2 x mid height front assembly.stl
Finally if you want to put an intermediate shelf for the top 29cm space, print :
4 x shelf support.stl
Each assembly piece can be screw with 4 x ¤3/25mm plaster screws (with a 8mm conic head)
The Doors pivots are for ¤3/10mm screws and their bolts