Thingiverse
idler for jgmaker artist-D by tonykite
by Thingiverse
Last crawled date: 3 years, 1 month ago
Pièce de remplacement pour les extrudeurs de l'imprimante jgmaker artist-D.
la vis du roulement est changé par une vis M3x8mm.
Replacement part for the jgmaker artist-D printer extruders.
the bearing screw is changed by M3x8mm screw.
remove the nozzle by pressing the lowest push button.
remove the 2 push screws located on the side (for changing nozzle and for loading filament)
remove the filament
-remove the tablecloth
-remove the 2 screws above the carriage holding the belt
-Unscrew the 4 screws of the extruder cover held on the mgn
-all the block should fall
-Unscrew the 2 screws located on the top (on either side of the pneufit
-Unscrew the 2 screws located on the front of the cover (where there were the push buttons)
-the cover should separate from the extruder block
-Remove the 2 screws holding the connector plate
-remove the connector from the nema
-Remove the 2 screws holding the fan to the nozzle
-Remove the 2 screws of the radiator cooling fan
unscrew the pneufit
-Unscrew the 2 screws holding the nema to the radiator
remove the nema from the radiator
remove the part to be changed (pay attention to the spring).
-remove the bearing and put it on the new part (I changed the screw for m3x8)
-insert the part and the spring while maintaining pressure on the part and add the nema, make small rotations of the nema so that it fits correctly (the nema must come pressed against the radiator)
screw the nema back to the radiator
screw the fan back to the radiator
-pass the filament by pressing on the new part, to test the insertion of filament
insert the tablecloth
-fix the pneufit without the ptfe
-insert the ptfe into the pneufit until it stops
-insert the nozzle (the ptfe protruding from the nozzle may need to be cut because on all my nozzles almost all have a different height! If there is a cut, bevel the tip of the ptfe with a pencil sharpener so that it s 'fits well in the room)
make an extrusion test to see if it is good
-if ok, screw everything back! NB: for the right extruder, there is a small complication since it is necessary to remove the screw located at the top of the carriage allowing the height adjustment. Removing it is easy, however, putting it back on less!
la vis du roulement est changé par une vis M3x8mm.
Replacement part for the jgmaker artist-D printer extruders.
the bearing screw is changed by M3x8mm screw.
remove the nozzle by pressing the lowest push button.
remove the 2 push screws located on the side (for changing nozzle and for loading filament)
remove the filament
-remove the tablecloth
-remove the 2 screws above the carriage holding the belt
-Unscrew the 4 screws of the extruder cover held on the mgn
-all the block should fall
-Unscrew the 2 screws located on the top (on either side of the pneufit
-Unscrew the 2 screws located on the front of the cover (where there were the push buttons)
-the cover should separate from the extruder block
-Remove the 2 screws holding the connector plate
-remove the connector from the nema
-Remove the 2 screws holding the fan to the nozzle
-Remove the 2 screws of the radiator cooling fan
unscrew the pneufit
-Unscrew the 2 screws holding the nema to the radiator
remove the nema from the radiator
remove the part to be changed (pay attention to the spring).
-remove the bearing and put it on the new part (I changed the screw for m3x8)
-insert the part and the spring while maintaining pressure on the part and add the nema, make small rotations of the nema so that it fits correctly (the nema must come pressed against the radiator)
screw the nema back to the radiator
screw the fan back to the radiator
-pass the filament by pressing on the new part, to test the insertion of filament
insert the tablecloth
-fix the pneufit without the ptfe
-insert the ptfe into the pneufit until it stops
-insert the nozzle (the ptfe protruding from the nozzle may need to be cut because on all my nozzles almost all have a different height! If there is a cut, bevel the tip of the ptfe with a pencil sharpener so that it s 'fits well in the room)
make an extrusion test to see if it is good
-if ok, screw everything back! NB: for the right extruder, there is a small complication since it is necessary to remove the screw located at the top of the carriage allowing the height adjustment. Removing it is easy, however, putting it back on less!
Similar models
thingiverse
free
3mm Filament Bowden Adapter for K8200 by B4R
...filament in tube and then put the screws in (the filament prevents the tube from sqeezing on itself).
-remove filament and voila!
thingiverse
free
QIDI Tech I dual extruder leveling Jig by Pascal32
...e of the jig, put the straight edge against the side of the extruders to line them up, and tighten the set screws.
re-assemble :)
thingiverse
free
JGMaker Artist-D Mellow BMG by Link08500
...on :
the fans duct for the extruder 2 you must make a mirror.
please don't used the old version!
i have remove the old older.
thingiverse
free
MK8 Filament guide by Aurion55
...remove filament once hot enough, remove the cooling fan and insert this part.
once cooling fan back in place, add filament again.
thingiverse
free
40mm Snap On Fan Guard for Prusa i3 MK3s - Screw Access
...i remove the fan duct for easier nozzle changes. this remix allows the screw to be removed without removing the fan guard. enjoy!
thingiverse
free
BIQU B1 Hotend fix by looxonline
...not tested it so you may need to account for shrinkage in the material that you use but that should get you 99% of the way there.
thingiverse
free
Double fan cooling for Prusa i3 MK2 and MK2S by Stipa
...es included.
edit: added mk2s extruder body with shorter pinda holder to fit on mk2s version. or you just could cut original one.
grabcad
free
SquareBOT Extruder MK8
...;
fan 40x40x20(10);
e3d hotend v6;
10mm ptfe (tube 2x4mm) insert as filament guide.
stl: http://www.thingiverse.com/thing:1760524
thingiverse
free
MK3S Nozzle RHD Rev. C Remixed
...(balancing weight) and also removes the useless side arm. similary to my previous remix, there are several tweaks to...
thingiverse
free
Anycubic Nozzle Tool
...anycubic nozzle tool
thingiverse
too hold the extruder while unscrewing the nozzle.
Tonykite
thingiverse
free
Calibrate cube by tonykite
...librate cube by tonykite
thingiverse
cube pecision test of dimensions 50mm x 50mm x20mm.
allows you to calibrate your x y z axes
thingiverse
free
3/4 female female watering connection by tonykite
...3/4 female female watering connection by tonykite
thingiverse
3/4 female female watering connection
printed with colorfabb ngen
Jgmaker
thingiverse
free
jgmaker magic fanduct
...jgmaker magic fanduct
thingiverse
jgmaker magic fanduct
thingiverse
free
JGMaker Magic Y-Axis Drag Chain Brackets by drewmcintire
...g chain on the jgmaker magic. they are compatible with the drag chain by @diogosantos88 https://www.thingiverse.com/thing:3715002
thingiverse
free
JGMaker Artist-D Mellow BMG by Artsiom
...0625
https://www.thingiverse.com/thing:4823742
https://www.thingiverse.com/thing:4828331
update: step & f3d files were added.
thingiverse
free
JGMaker Magic SKR 1.3 Adapters
...tps://www.thingiverse.com/thing:3655968
2) watch this thingy's video.
then, if you still want to tackle this project - enjoy!
thingiverse
free
JGAurora/JGMaker A6 Mainboard Replacement STL files by DaHai8
... to a more user friendly mainboard and firmware.
please see my youtube video on how these are used.
https://youtu.be/yzken7_nima
thingiverse
free
Filler adapter for JGMaker Artist-D by YuTR0N
...filler adapter for jgmaker artist-d by yutr0n
thingiverse
m4 screw is needed
2021/03/29
not
only m4 screw but also nut!
thingiverse
free
Direct extruder and BL touch mounter for JGmaker magic by Tyatarou
...or this mounter.
you can also mount bltouch, but you need to change the motherboard or add parts.
i replaced it with skr mini e3.
thingiverse
free
JGMaker Magic Fan 4010 / 5015 by Randaleklaus
...- en24032
m3 - 4
for 5015_blower bulid:
screws - iso4762
m3x6 - 6
m3x10 - 2
m3x16 - 2
m3x20 - 4
nuts - en24032
m3 - 4
thingiverse
free
JGMaker Magic Fan Duct Dual 5015 by sirhcwolf
...olf
thingiverse
dual 5015 fan duct for the jg maker magic. works with stock shroud and https://www.thingiverse.com/thing:4426539
thingiverse
free
JGMaker Artist-D Mellow BMG by Link08500
...on :
the fans duct for the extruder 2 you must make a mirror.
please don't used the old version!
i have remove the old older.
Idler
3d_export
$20
telescopic stacker belt conveyor
...and the actual components are as follows cema c idler cema c impact roller dodge bearing avoid tension bearing...
3d_export
$49
Liebherr R9250 Tracks - Crawler
...main parts: bottom rollers car bodies final drives top idler front idlers slewing rings-turntable bearings sprockets text track chains...
3d_export
$119
JD - 953MH Tracked Log Loader
...boby with engine<br>main body bolts<br>main body grilles<br>pedals<br>right - front idlerlt;br>right - rear idler<br>right track chain<br>right track links<br>right track protector<br>right...
3d_export
$129
JD - 959MH Tracked Feller Buncher
...boby with engine<br>main body bolts<br>main body grilles<br>pedals<br>right - front idlerlt;br>right - rear idler<br>right track chain<br>right track links<br>right track protector<br>right...
3d_export
$119
JD - 959MH Tracked Log Loader
...boby with engine<br>main body bolts<br>main body grilles<br>pedals<br>right - front idlerlt;br>right - rear idler<br>right track chain<br>right track links<br>right track protector<br>right...
3d_export
$119
JD - 953MH Tracked Harvester
...tool - lower<br>moving limbing tool - upper<br>pedals<br>right - front idlerlt;br>right - rear idler<br>right feed rollers<br>right track chain<br>right track links<br>right...
thingiverse
free
Idler seat by jcen517
...idler seat by jcen517
thingiverse
idler seat
thingiverse
free
Idler by GEON_3D
...idler by geon_3d
thingiverse
idler para extrusor 1,75
imprimir en abs, petg o cualquier material resistente
thingiverse
free
wade idler by nautilux
...wade idler by nautilux
thingiverse
wade idler reforzado
thingiverse
free
Idler Frame by Dinusha
...idler frame by dinusha
thingiverse
idler frame specially for the belt conveyors.
Artist
3d_export
$5
artiste azul mix artiste verde mix
...artiste azul mix artiste verde mix
3dexport
artiste azul mix<br>artiste verde mix
3d_export
$19
Taekwondo Kangaroo martial artist boxer artist
... kangaroo martial artist boxer artist
3dexport
1.taekwondo kangaroo martial artist, boxer artist 2.files include 3dmax fbx obj
design_connected
$11
Artist 40
...artist 40
designconnected
nordlux artist 40 computer generated 3d model. designed by bønnelycke mdd.
turbosquid
$15
Artistic fridge
...id
royalty free 3d model artistic fridge for download as max on turbosquid: 3d models for games, architecture, videos. (1258122)
turbosquid
$10
Artistic Lamp
...squid
royalty free 3d model artistic lamp for download as ma on turbosquid: 3d models for games, architecture, videos. (1218028)
3d_export
$5
Artist room
...artist room
3dexport
https://www.dock4all.com/
turbosquid
$10
Artistic Shield
...model artistic shield for download as c4d, ma, blend, and fbx on turbosquid: 3d models for games, architecture, videos. (1685359)
3d_export
$7
set dekor artist
...set dekor artist
3dexport
set dekor artist
3d_ocean
$5
Artist Easel
...k like the are still wet from the paint! this can be used to show your portfolio of 2d works in a 3d environment. in the readm...
turbosquid
$35
Artist Palette
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.