icom r8600 stand by G7BTP-Poul

Last crawled date: 3 years, 5 months ago

I came across Fabianomoser Icom stands 7300/9700 and after printing them out I decided I would like the stand rail to be a bit more deeper and less of a gap between the top of the stand and the bottom of the radio.so i designed mine for the 7300/9700 and then came up with this one for the R8600 I also cut a large square threw the stand to cut down time and filament.
LETTERS NOTES
The lettering is 3mm deep in the stand and the lettering print is 2mm thick.
I did drop the X axis down to 99.5% (Y & Z left at 100%) when slicing to help the letters squeeze in the gap and gently tap them in place.these fitted in quite well on the 7300 and 9700 705 stands
on this one i had to do quite a bit of filing for them to fit
try making them i bit thinner if you have trouble fitting them
Thanks to CT7ABD fabianomoser for the original designs
hope you enjoy 73s Poul G7BTP
please see other stands
used cura 4.8