Thingiverse
Iambic Paddles (Narrow Version) by ReallyBigTeeth
by Thingiverse
Last crawled date: 3 years ago
If you like what you see here, consider leaving a tip.
Remixed from an excellent design by Thingiverse user and certified amateur radio operator Loren Butler (V01PWF), the intent of this project was to make a set of 3D printable iambic paddles that were as portable as possible, yet comfortable enough to use at a desk. This is the narrow version of these paddles and are not base mountable. The base mountable version is 10 mm wider and can be found here, and a mini version can be found here.
Hardware Used:
3x 6-32 x 1 inch phillips flat pan head screws for paddle pivots and ground contact
2x 6-32 phillips flat pan head screws trimmed to 11.5mm thread length for paddle contacts
2x 6-32 nuts/springs and washers for paddle contact screws
4x 6-32 1/4 inch phillips flat pan head screws for attaching the cover
1x 1/8 inch stereo jack or hot glue
1x Spring from a retractable pen (3.5mm outer diametre, 10mm length)
or 2x neodymium magnets
or 1x 3D printable spring designed by Mlogith
3x short lengths of stranded wire
The paddles use a spring from an empty retractable ball point pen, and are tension adjustable via a set of pockets along the inside of each arm. A suggestion from wz2prich is to use neodymium magnes glued to the arms instead of a spring. Arm travel to contact is adjustable but the resting point is fixed. Using springs in place of the nuts on the paddle contact screws can make adjustments faster and easier. The plug at the rear of the paddles is a 1/8" stereo jack which could lead to an electronic keyer, radio, or pc interface. A tip from Thingiverse user KD9AYE is to glue the wires in place, eliminating the need for a stereo jack. Photos of his build of the narrow and base mountable versions of these paddles can be found here. Using springs in place of the nuts on the paddle contact screws can make adjustments faster and easier.
Remixed from an excellent design by Thingiverse user and certified amateur radio operator Loren Butler (V01PWF), the intent of this project was to make a set of 3D printable iambic paddles that were as portable as possible, yet comfortable enough to use at a desk. This is the narrow version of these paddles and are not base mountable. The base mountable version is 10 mm wider and can be found here, and a mini version can be found here.
Hardware Used:
3x 6-32 x 1 inch phillips flat pan head screws for paddle pivots and ground contact
2x 6-32 phillips flat pan head screws trimmed to 11.5mm thread length for paddle contacts
2x 6-32 nuts/springs and washers for paddle contact screws
4x 6-32 1/4 inch phillips flat pan head screws for attaching the cover
1x 1/8 inch stereo jack or hot glue
1x Spring from a retractable pen (3.5mm outer diametre, 10mm length)
or 2x neodymium magnets
or 1x 3D printable spring designed by Mlogith
3x short lengths of stranded wire
The paddles use a spring from an empty retractable ball point pen, and are tension adjustable via a set of pockets along the inside of each arm. A suggestion from wz2prich is to use neodymium magnes glued to the arms instead of a spring. Arm travel to contact is adjustable but the resting point is fixed. Using springs in place of the nuts on the paddle contact screws can make adjustments faster and easier. The plug at the rear of the paddles is a 1/8" stereo jack which could lead to an electronic keyer, radio, or pc interface. A tip from Thingiverse user KD9AYE is to glue the wires in place, eliminating the need for a stereo jack. Photos of his build of the narrow and base mountable versions of these paddles can be found here. Using springs in place of the nuts on the paddle contact screws can make adjustments faster and easier.
Similar models
thingiverse
free
Iambic Paddles (Base Mountable Version) by ReallyBigTeeth
...ng the need for a stereo jack. photos of his build of the narrow and base mountable versions of these paddles can be found here.
thingiverse
free
Iambic Paddles (Mini Version) by ReallyBigTeeth
...d contact screw. two optional screws at the rear of the case can also be used to hold the cover in place, but are not necessary.
thingiverse
free
Hobie Kayak H-Rail Paddle Mount by JESTERxHEAD
...ut, stainless
for mounting the paddle clip:
2x #10-24 x .50" lg stainless pan head screw
2x #10-24 nylon lock nut, stainless
thingiverse
free
Iambic Paddles (For resin printing) by ratmandu
...ratmandu thingiverse iambic paddles for cw (morse code). very similar to others out there, but designed to be printed...
thingiverse
free
uBitX Single Lever Morse Code Paddle by AngelDMercedes
...ion cable (with two 3.5mm jacks) or any other cable with one 3.5mm audio jack.
build and test video:https://youtu.be/opoirwk1lkg
thingiverse
free
Artillery Genius - SWX1 filament sensor holder
...5mm
2x flat head screw m3 x 8mm
3x nut m3
2x t-nut m3
1x ptfe tubing
2x pc4 m6
pc4 m6https://www.amazon.de/gp/product/b07n6h43fw
thingiverse
free
Sim Racing Paddle Shifter (simple print) by PhronemoS
...s:
2x - neodymium magnet (size 8x2mm)
3x - screw m3x25mm
1x - screw m3x30mm
4x - nut m3
update 09.03.2021
added solid base model.
thingiverse
free
EXT3 Bowden 1.75 by Eldrid
...tubing 4mm od 2mm id (16mm, 12mm long)
2x ptfe fitting pc4-m6 (m6 screw, for 4mm ptfe tube)
1x mk7 drive gear for 1.75mm filament
thingiverse
free
Leg Strap Base for Iambic Paddles by miracolifarm
...eg strap base for reallybigteeth's iambic paddles (base mountable). https://www.thingiverse.com/thing:2054230
nice snug fit.
thingiverse
free
Filament Spool Arm by jesc
...ap.
requires:
2x m3 screws and nuts (optional: another 2x)
2x m8 nuts
1x m8 threaded rod (~10cm long)
1x m8 washer
1x 608 bearing
Iambic
thingiverse
free
Iambic Keyer by matrhint
...iambic keyer by matrhint
thingiverse
it is a iambic morse code keyer
thingiverse
free
mini iambic paddle by OK1IAK by bubnikv
...mini iambic paddle by ok1iak by bubnikv
thingiverse
mini iambic paddle by ok1iak
thingiverse
free
Oversize Paddles for Vibroplex Iambic by N7JX
...lex iambic a bit too "dainty". these are quite a bit larger, similar to the conversion paddles vibroplex sells for $15.
thingiverse
free
Micro Iambic CW Key by the-kenny
...r mobile use. it uses a hacksaw blade and three m3 screws.
version 2 with better wire routing, strain relief, and mounting holes.
thingiverse
free
Leg Strap Base for Iambic Paddles by miracolifarm
...eg strap base for reallybigteeth's iambic paddles (base mountable). https://www.thingiverse.com/thing:2054230
nice snug fit.
thingiverse
free
Yet another iambic CW paddle by dtemes
...rial:
4 x m5x20mm
3 x m5x30mm
7 x m5 nuts
2 x m4x10mm
4 magnets 5x5x1mm for the paddle return
the base was printed with supports.
thingiverse
free
Large CW Morse Code Iambic Key by jzkmath
... just got into morse code not too long ago.
use the iambic2 file for printing, as it has been rotated to be flat on your printer.
thingiverse
free
Non-iambic Morse code key with paddles V2 by cebess
...mber of years ago but decided to streamline it and make the paddles more secure so this is a v2 of my previous non-iambic paddle.
thingiverse
free
Replacement Paddles for CW Morse Iambic by kkessler
...em to work well. be careful when resoldering the brass contacts, because if you take too long, you will melt and bend the paddle.
thingiverse
free
Iambic Paddles (For resin printing) by ratmandu
... washers, and nuts.
spring is 0.21in od.
pockets on bottom to glue in magnets (i'm using 10mm diameter, 3mm thick neodymium).
Reallybigteeth
thingiverse
free
ALPS Macro Keycaps by ReallyBigTeeth
...y reallybigteeth
thingiverse
if you like what you see here, consider leaving a tip.
custome made alps keycaps for macro keyboard
thingiverse
free
Earring/Jewellery Stand by ReallyBigTeeth
...he print bed. clip together to assemble. use a dab of glue if you wish.
thanks goes out to kyllikki for physical connections.
thingiverse
free
Corsair Voyager GT USB Case for Keyring by ReallyBigTeeth
...e what you see here, consider leaving a tip.
case for a corsair voyager gt usb stick that has a hole for attaching to a key ring.
thingiverse
free
Ergodox ALPS DCS Keycap set by ReallyBigTeeth
...eyboards with alps switches.
print right side up with support. sand the top surface for a more comfortable typing experience.
thingiverse
free
REVOMAZE Puzzle Grip by ReallyBigTeeth
...icator on the puzzle's core and tighten the screw.
the revomaze stand can be found here.
check out the revomaze website here.
thingiverse
free
Nexus 7 (2013) Laser Barcode Scanner (Symbol LS3408) by ReallyBigTeeth
...erse
if you like what you see here, consider leaving a tip.
combine a nexus 7 (2013) with a symbol ls3408 laser barcode scanner.
thingiverse
free
T8 Leadscrew Anti-Backlash Spacer by ReallyBigTeeth
.... the assembly is fastend together using m3 bolts. the model may need adjustment to get the correct thickness for your assembly.
thingiverse
free
REVOMAZE Stand - Remix by ReallyBigTeeth
...viewtopic.php?f=25&t=2430&p=55627#p55627
the revomaze puzzle grip can be found here.
check out the revomaze website here.
thingiverse
free
Digital Clock Case (Cardinal Model 6025 / 928) by ReallyBigTeeth
...al clock enclosure for cardinal alarm clock model 6025. basic model 928. uses battery door and buttons from original clock case.
thingiverse
free
Nexus 7 2013 Keyboard stand by ReallyBigTeeth
....
use a keyboard with your tablet while laying in bed, sitting in a chair, or at a desk.
assembly viideo
angle adjustment video
Paddles
turbosquid
free
Paddle
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
archive3d
free
Paddle 3D Model
...ve3d
paddle kitchen ware
paddle n051107 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$38
Canoe with paddles 3D Model
...ith paddles 3d model
3dexport
canoe boat kayak water ship paddle paddles canoes
canoe with paddles 3d model tartino 1928 3dexport
turbosquid
$20
Paddle Stool
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
paddling pool
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Fabbian F11 Paddle
...fabbian f11 paddle
3ddd
fabbian
http://www.fabbian.com/en/f11-paddle-1#.u7pvdg3js70
turbosquid
$25
Table Tennis Paddles
...oyalty free 3d model table tennis paddles for download as c4d on turbosquid: 3d models for games, architecture, videos. (1562413)
turbosquid
$5
Car Paddle Wheel
...d
royalty free 3d model car paddle wheel for download as stl on turbosquid: 3d models for games, architecture, videos. (1363398)
turbosquid
$20
Ping Pong Paddle
... free 3d model ping pong paddle for download as blend and fbx on turbosquid: 3d models for games, architecture, videos. (1597196)
turbosquid
free
Ping Pong Paddle
...lty free 3d model ping pong paddle for download as ma and fbx on turbosquid: 3d models for games, architecture, videos. (1335962)
Narrow
3d_export
$5
narrow slot handle
...narrow slot handle
3dexport
narrow slot handle
turbosquid
$6
NARROW ROAD
...osquid
royalty free 3d model narrow road for download as max on turbosquid: 3d models for games, architecture, videos. (1210764)
turbosquid
$79
The Narrow House
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
Narrow Bridgeroadsign
...ow bridgeroadsign for download as 3ds, dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1532958)
turbosquid
$19
Beige narrow curtains
...yalty free 3d model beige narrow curtains for download as max on turbosquid: 3d models for games, architecture, videos. (1448198)
turbosquid
$33
Road Narrows Sign
... 3d model road narrows sign for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1303392)
turbosquid
$6
Narrow wooden shelf
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Narrow wooden shelf
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Narrow wooden shelf
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Narrow wooden shelf
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Version
3ddd
$1
Diamond version
...nd , version , ванна
visionnaire - diamond bath
turbosquid
$50
LibraryMini Version
...free 3d model librarymini version for download as max and jpg on turbosquid: 3d models for games, architecture, videos. (1617724)
design_connected
$34
Barocco Version 01
...barocco version 01
designconnected
zanotta barocco version 01 computer generated 3d model. designed by progetti, emaf.
design_connected
$27
Barocco Version 02
...barocco version 02
designconnected
zanotta barocco version 02 computer generated 3d model. designed by progetti, emaf.
turbosquid
free
Door [2 versions]
...rbosquid
free 3d model door [2 versions] for download as fbx on turbosquid: 3d models for games, architecture, videos. (1223985)
turbosquid
$2
seat version 0.1
...
royalty free 3d model seat version 0.1 for download as blend on turbosquid: 3d models for games, architecture, videos. (1432653)
turbosquid
$12
Chip Version 03
...lty free 3d model chip version 03 for download as c4d and fbx on turbosquid: 3d models for games, architecture, videos. (1241145)
3d_export
$10
magnolia grandiflora mature version
...magnolia grandiflora mature version
3dexport
magnolia grandiflora mature version
3d_export
$8
room assets and voxel version
...room assets and voxel version
3dexport
room assets and voxel version
turbosquid
$35
Zil Civilian version
... model zil civilian version for download as cgf, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1639420)