Thingiverse
HyperCube16 by mlbuxbaum
by Thingiverse
Last crawled date: 3 years ago
I took Tech2C's hypercube design and scaled it up a bit. I was aiming for a 16x16x16 build volume, but I wound up with a little bit smaller at a 14" x 14.5"x 13" build volume.
I printed all parts out (on a HICTOP 3DP11) with Hatchbox 1.75mm , PLA at 210°c with the build plate at 40°c.
50% fill, .25mm layer height 3 top, bottom and perimeter shells
Had to mirror the bed guide rails and lead screw for the front of the bed since my build plate was much heavier than the original design.
I plan or re-working this unit with longer 2020 framing, so I can get my full 16x16x16 build volume. When i ordered my 2020 extrusions, i got them precut at 20" each. I thought that would give me the 16x16 I wanted but I was wrong. I'm also going to re-print all the parts with PET-G filament.
I printed all parts out (on a HICTOP 3DP11) with Hatchbox 1.75mm , PLA at 210°c with the build plate at 40°c.
50% fill, .25mm layer height 3 top, bottom and perimeter shells
Had to mirror the bed guide rails and lead screw for the front of the bed since my build plate was much heavier than the original design.
I plan or re-working this unit with longer 2020 framing, so I can get my full 16x16x16 build volume. When i ordered my 2020 extrusions, i got them precut at 20" each. I thought that would give me the 16x16 I wanted but I was wrong. I'm also going to re-print all the parts with PET-G filament.
Similar models
thingiverse
free
Lego Flower Parts by Hopo28
... is limited, so chopped up the design into bits.
this also allows you to print multiples e.g. 4 sets of stems on one build plate.
thingiverse
free
Printing plates for Mr. Maker by ErikJDurwoodII by MakerBlock
...rinting plates!
also, i had trouble getting openscad to render "bot_spool1.stl" so i fixed it up a bit and re-saved it.
thingiverse
free
CTC Adjustable Glass Bed Corner Clamp by m4t42
...ers for a 6" x 9" glass plate as this seems a pretty common size - i will add them to this thing when they're done.
thingiverse
free
Corner fixation for Creality glass bed by pbonamy
...our m3 x 35mm with nuts and rods, there's also a pace for a spring to ease the withdrawal, i don't use it. also two m3*12
thingiverse
free
Build Plate Screw Lock by notarat
... place wing nuts on my leveling screws so they cannot loosen up. this means the build plate does not have to be leveled as often.
thingiverse
free
2.5" Universal Shop Vac Nozzles by neuone
...a 2.5" hose. i have printed the smaller of the two nozzles. these part requires an 8" x 8" x 7" build volume!
thingiverse
free
Metabo KGS E 1670 S-Signal chop and miter saw repair parts by fojung
...ngled up and inside the base plate i re-designed and re-printed all four gliders.
(2) bed dust cover. was missing on my machine.
thingiverse
free
Bunk Bed by mfazio_science
... glued together once printed. needed some sanding and filing to make a few parts fit, but overall the bed turned out pretty well.
thingiverse
free
2020 Aluminum Extrusion Plates by adamjvr
...new ones at this new thing: https://www.thingiverse.com/thing:4117326 come check them out and print them, tell me what you think!
thingiverse
free
Adjustable Cable Holder - all parts on 1 build plate by pvl
... on one build plate so they can be sliced and printed as one object.
a big thank you to montiey for this design. super useful!!!
Hypercube16
thingiverse
free
Hypercube 16 Improvements by mlbuxbaum
...by mlbuxbaum thingiverse these are unproven designs for my hypercube16 printer. i am replacing both z-axis lead screws with...
thingiverse
free
HyperCube V2 by mlbuxbaum
...help with the bed wobble i am experiencing with hypercube16 bed wobble was fixed by using dual16mm ball screws...
Mlbuxbaum
thingiverse
free
Hold by mlbuxbaum
...hold by mlbuxbaum
thingiverse
this is one half of the hold. the mirrored part will be published soon
thingiverse
free
ANW 2016 plaque by mlbuxbaum
...anw 2016 plaque by mlbuxbaum
thingiverse
american ninja warrior 2016 plaque
thingiverse
free
Hypercube 16 bed support by mlbuxbaum
...hypercube 16 bed support by mlbuxbaum
thingiverse
beefier bed supports for the larger bed size
thingiverse
free
LED Strip holder by mlbuxbaum
...led strip holder by mlbuxbaum
thingiverse
led strip holder that i designed to attach led strips that i had to a 2020 extrusion
thingiverse
free
Hypercube 16 Improvements by mlbuxbaum
...baum
thingiverse
these are unproven designs for my hypercube16 printer. i am replacing both z-axis lead screws with ball screws.
thingiverse
free
dual switch housing HICTOP by mlbuxbaum
... by mlbuxbaum
thingiverse
made this bracket to house 2 switches for my hictop printer. one for main ps power and one for the led
thingiverse
free
HyperCube V2 by mlbuxbaum
...d help with the bed wobble i am experiencing with hypercube16. bed wobble was fixed by using dual16mm ball screws for the z axis.
thingiverse
free
Ball Screw Bed Mount & Top Bearing Mount (Old One) by mlbuxbaum
...r my hypercube. dual 16mm ballscrews instead of 8mm lead screws and guide rails. guide rails not required with these ball screws.