HyperCube 3030 Version with 300x200 Bed by s3rkan

Last crawled date: 3 years, 1 month ago

UPDATES:08.05.2018: .stp file is updated. configuration.h file for Marlin 1.1.8 is added (suitable for my Z-Probe design).25.04.2018: Case for 12864 controller is added. 4 of brass inserts (M355mm OD 5mm) are needed for assembly.https://www.aliexpress.com/item/100PCS-M3-5-5mm-OD-5mm-Brass-Inserts-Double-Pass-Copper-Knurl-Nut-Embedded-Fastener/32822621373.html19.10.2017: Added configuration.h and configuration.adv files for Marlin 1.1.6. I have configured the files for my new carriage: https://www.thingiverse.com/thing:2551717 Please change the necessary sections for your printer like Z step per unit, printer name...25.09.2017: New X carriage is out: https://www.thingiverse.com/thing:2551717 In action video:https://www.youtube.com/watch?v=5Fln4nKIfVA30.07.2017: Added source files of whole design as HyperCube 3030 Design Files.zip
You will need 3030 extrusions: 460mm x 4 (X), 333mm x 4 (Y), 450mm x 4 (Z) for the main frame. For the bed (2020): 235mm x 2, 290mm x 2, For the gantry you will need 490mm x 2 steel rods
For the parts that attached to the main frame you should use m6 x 12 bolts and for the bed parts use m5 x 10
Here are some notes about some parts:
3030_Leg and foot: It uses m8x60mm bolt and nut
3030_SquareHolder: Use it if you don't want to use the aluminum ones
12864_Back_Board: It is for this design: https://www.thingiverse.com/thing:1676899
Bed_Support_v1.1 and v1.2: Choose what you want
SK12: Print 4 of this design and instead of original Z bar holders
SpoolHolderBracket: It needs two 608zz and a 8mm steel rod in 105mm length
X _Carriage_Alternative: Use "Seperate Connected Surfaces" in Simplify3d to seperate the parts or you can find the details here: https://www.thingiverse.com/thing:2379178
XY_Idler...: Choose which you want to use
XY_Joiner: Remixed from here: https://www.thingiverse.com/thing:2192301
XY_Motor_left-1degre and XY_Motor_right-1degre: If you are using vibration dampener, you may want to use these designs to compensate the deflection of the stepper
Y_EndStop_Holder: For 20x6.5mm mechanical endstops
Corner_Led_Bracket: For more information visit here: https://www.thingiverse.com/thing:2164017
LMK12LUU_Bed_Holder: Should be mirrored for the other side
X_Carriage: For more information visit here: https://www.thingiverse.com/thing:2425642
Bottom_Plate_Holders: Cut a bottom plate to place the arduino, powersupply, fan according to the dxf file. Than you can fix these components with m3 screws to this plate whereever you want.
For extruder, I am using this design:https://www.thingiverse.com/thing:2348459