Thingiverse
Hypercube 300 CoreXY by adrianm1972
by Thingiverse
Last crawled date: 3 years, 1 month ago
The Hypercube 300 is an extensive remix of Tech2C's Hypercube CoreXY 3D Printer. My goal with this project was to make a low cost, high build volume 3D printer with print quality rivaling the best, most expensive consumer printers. I feel I succeeded. The printer can be built with top quality components for less than $600 and with budget conscious components for less the $500. The Hyper cube 300 features a true 300mm^3 build volume. It's a few mm more than 300mm in every axis so you can successfully print right to the limits. The print quality from the first print was outstanding and has gotten even better with basic tuning.
Please see the thing files for an up to date BOM with descriptions and quantities of what you need.
I will update this shortly with how many to make of my STL's.
You will need to go to Tech2C's Hypercube Thingiverse page, download the print his X and Y motor mounts, belt idler bearing mounts, the XY carriage and all the hot end, fan and probe parts. I will update this post shortly with links to the files and quantities for those.
I am a regular on the Hypercube CoreXY 3D Printer Group ( https://www.facebook.com/groups/1871049783171141/ ). Lots of great folks there. If you have questions ask here or join the group and ask there.
9/14/2017 - Updated a few parts while hurricane Irma was wreaking havoc around me.
Switched from 10mm back to 8mm Y rods. They are plenty strong and a LM8LUU bearings is literally 1/2 the weight of an LM10LUU bearing.
Updated the XY joiner and its bearing cap to make it stronger, lighter and look nicer. I tweaked how the bearing cap clamps to the joiner to allow a better grip on bearings for those using IGUS or printed solid bushings.
Updated the Y rods mounts to hold 8mm rods.
9/22/2017 - Added optional parts for 10mm Y Rods after the BOM file in the things list.
10/8/2017 - Revised XYJoiner and its bearing cap. Also added a integrated bearing cap/bushing for those wanting to use a printed bushing instead of a LM8LUU bearing
10/30/2017 - Revised all "Thing" names as follows
All STL files show the quantity necessary at the end of the file name
All STL files indicate comparability of the file
a. STL's starting with HC fit the original Tech2C Hypercube and my Hypercube 300
b. STL's starting with HC300 fit the Hypercube 300 only
c. STL's with no prefix can fit any printer that uses 2020 type extrusions
1/17/2018 - Updated all STL files to the latest and greatest.
New 12864 Enclosure now has cutouts and when combined with the RPi3 adapter place and spacers will allow for an RPi3 to be tucked in behind the LCD.
The The XY Motor mounts are now HC300 only parts. The cutouts for a y shaft mounted limit switch have been removed. They are stronger and nicer looking than the standard HC mounts.
The RAMPS box is more simple and prints 10X faster!
New z bearing carriages are completely different and optimized for a 4 z rod build.
The bushings for the X carbon tubes no longer take IGUS bushing. Now they are one piece bushings that ride directly on the rod. Note you may have to print a few of these with different extrusion multipliers to get the right fit.
Update 4/2/2018
Made lower Z rod mounts stronger
Made Z bearing carriages prettier, easier to assemble and faster to print.
Please see the thing files for an up to date BOM with descriptions and quantities of what you need.
I will update this shortly with how many to make of my STL's.
You will need to go to Tech2C's Hypercube Thingiverse page, download the print his X and Y motor mounts, belt idler bearing mounts, the XY carriage and all the hot end, fan and probe parts. I will update this post shortly with links to the files and quantities for those.
I am a regular on the Hypercube CoreXY 3D Printer Group ( https://www.facebook.com/groups/1871049783171141/ ). Lots of great folks there. If you have questions ask here or join the group and ask there.
9/14/2017 - Updated a few parts while hurricane Irma was wreaking havoc around me.
Switched from 10mm back to 8mm Y rods. They are plenty strong and a LM8LUU bearings is literally 1/2 the weight of an LM10LUU bearing.
Updated the XY joiner and its bearing cap to make it stronger, lighter and look nicer. I tweaked how the bearing cap clamps to the joiner to allow a better grip on bearings for those using IGUS or printed solid bushings.
Updated the Y rods mounts to hold 8mm rods.
9/22/2017 - Added optional parts for 10mm Y Rods after the BOM file in the things list.
10/8/2017 - Revised XYJoiner and its bearing cap. Also added a integrated bearing cap/bushing for those wanting to use a printed bushing instead of a LM8LUU bearing
10/30/2017 - Revised all "Thing" names as follows
All STL files show the quantity necessary at the end of the file name
All STL files indicate comparability of the file
a. STL's starting with HC fit the original Tech2C Hypercube and my Hypercube 300
b. STL's starting with HC300 fit the Hypercube 300 only
c. STL's with no prefix can fit any printer that uses 2020 type extrusions
1/17/2018 - Updated all STL files to the latest and greatest.
New 12864 Enclosure now has cutouts and when combined with the RPi3 adapter place and spacers will allow for an RPi3 to be tucked in behind the LCD.
The The XY Motor mounts are now HC300 only parts. The cutouts for a y shaft mounted limit switch have been removed. They are stronger and nicer looking than the standard HC mounts.
The RAMPS box is more simple and prints 10X faster!
New z bearing carriages are completely different and optimized for a 4 z rod build.
The bushings for the X carbon tubes no longer take IGUS bushing. Now they are one piece bushings that ride directly on the rod. Note you may have to print a few of these with different extrusion multipliers to get the right fit.
Update 4/2/2018
Made lower Z rod mounts stronger
Made Z bearing carriages prettier, easier to assemble and faster to print.
Similar models
thingiverse
free
Hypercube LM8LUU Z-Carriage by grapha3d
...d by using this single lm8luu instead of using the double lm8uu version that tech2c uses, so it can save you money on your build.
thingiverse
free
Igus 10mm Bushing Holder for LM8LUU by superjamie
...d or tube on the x axis, or just allows to not use a noisy metal linear bearing on a 10mm steel rod.
openscad source is included.
thingiverse
free
Hypercube 18mm Dia sensor mount for new X Carriage by fsadak
...ew x carriage by fsadak
thingiverse
8mm (18mm dia) inductive sensor mount for tech2c's updated x carriage. stl and cad file.
thingiverse
free
Z Carriage Mount for Hypercube by ricbrown
...iverse
this is a slightly larger z carriage mount for the hypercube by tech2c. it helps prevent bed rails from sagging so much.
thingiverse
free
8mm clamps on XY joiner (for those who want to use 8mm rods for X and Y) by Xantour
...e original (tech2c's design) but with x axis clamps resized for 8mm rods so you can use lm8luu bearings for both the x and y.
thingiverse
free
Hypercube MK2 by leving
...did what they had to do. it is a strong fit just by the rods, let's check if that is sufficent or if it wears out over time.
thingiverse
free
Hypercube XY Joiner long by xyzyx
...o get better rigit/stiffness.
already printed and tested, works like should.
update - 26.07.2018 - added lm10luu version + clamp.
thingiverse
free
XY and Z carriage for graphite bushing ( Hypercube 3d printer ) by Nelujones
...om/product/175/selfgraphite-id8 ( greenar link )
for the z carriage will need 4 pieces
for the xy carriage will need 2 pieces
thingiverse
free
Hypercube evolution short bushing Z carriage by Otomar
...opossite side just mirror the stl in your slicer.
for better printability a put little support. that must be remove after print.
thingiverse
free
HyperCube Z Axis Limit Switch - 8 & 10 mm Mount by henryarnold
... end stop for convenience. there are no changes to this part which came from tech2c's hypercube design
printed in abs at 230c
Adrianm1972
thingiverse
free
Fan Duct - for Hypercube 300 by adrianm1972
...fan duct - for hypercube 300 by adrianm1972
thingiverse
fan duct for hypercube 3d - adrian martinez (adrianm1972)
thingiverse
free
2020 Extrusion Mount for Bondtech BMG Extruder by adrianm1972
...2020 extrusion mount for bondtech bmg extruder by adrianm1972
thingiverse
this is a mount for the bondtech bmg extruder.
thingiverse
free
HyperCube 300 v2 X Carriage for E3D V6 by adrianm1972
... by adrianm1972
thingiverse
this is an x carriage that enables users to mount a standard e3d v6 to a hypercube 300 v2 or 235 v2.
thingiverse
free
Hypercube 300 1605 Ball Screw Mod by adrianm1972
...spiration!
https://www.facebook.com/groups/1871049783171141/
get a 15% discount from zyltech.com at check out using code: 3dguru
thingiverse
free
Hypercube 300 Assembly Tool - Alignment Gauge by adrianm1972
...t looking than what's in the videos but they work exactly the same.
https://youtu.be/gupuisddakk
https://youtu.be/wqidulfxslu
thingiverse
free
HyperCube 300/235 v2.0 SKR Control Box by adrianm1972
...ug/switch
zip tie slots to secure wire bundles to hotend carrier and heated bed
easy access to reset button, sd card and usb port
thingiverse
free
HyperCube 300 v2.0 by adrianm1972
...rinter and i will upload a fusion 360 back up file as soon as its processed so you guys can go nuts customizing the solid models.
thingiverse
free
All New Spring Loaded Bowden Extruder by adrianm1972
...ss.
i have printed this, it all fits and works as designed. see pics above...enjoy!
assembly video: https://youtu.be/hxih7j6g4mg
thingiverse
free
Hypercube 300 Lite X Carriage by adrianm1972
...temp and marlin will shut off the hot end for safety. 70-80% fan speed works great.
the other parts should be printed as shown.
Corexy
thingiverse
free
CoreXY by Kaz_tech
...corexy by kaz_tech
thingiverse
this is the model of corexy platform. i separately put the parts on this place.
thingiverse
free
corexy plotter by tjwan
...corexy plotter by tjwan
thingiverse
parts for corexy mill inspired by http://der-frickler.net/technik/corexyportal
thingiverse
free
ScribbleJ CoreXY Beta by ScribbleJ
...j/corexy-v1https://github.com/scribblej/corexy-v1#corexy-beta
full gallery of development photos here: http://imgur.com/a/donun
thingiverse
free
CoreXY Emblem by emkajot
...by emkajot
thingiverse
an emblem for your corexy printer.
size: 100mm x 38mm x 2mm.
update: added a version with a proper mount.
thingiverse
free
SolidCore CoreXY Carriage by shanehooper
...olidcore 3d printer. this design could be used in other corexy 3d printers.
also see:https://3ddistributed.com/corexy-3d-printer/
thingiverse
free
CoreXY 3D Printer Model by ReginaFabricam
...bricam
thingiverse
this is an original design of a corexy printer.https://www.tinkercad.com/things/jggr9qk4s4p-3d-printer-corexy
thingiverse
free
coreXY Upper structure Left
...corexy upper structure left
thingiverse
my customized corexy 3d printer upper left parts
thingiverse
free
CoreXY by frankie
...ing machines, etc. the design is described in greater detail at http://www.corexy.com . a video is at http://vimeo.com/40914530 .
thingiverse
free
Endstop block for CoreXY carriage by svkeulen
...endstop block for corexy carriage by svkeulen
thingiverse
endstop for corexy carriage
thingiverse
free
X carriage for the CoreXY MGN12 by hackerbijay
...x carriage for the corexy mgn12 by hackerbijay
thingiverse
x carriage for the corexy frame
Hypercube
turbosquid
free
HyperCube
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Hypercube 3D Model
...hypercube 3d model
3dexport
cube hypercube four-dimensional space side geometry edge
hypercube 3d model dmitry87 54991 3dexport
3d_export
$5
tesseract hypercube
...t it. moreover different textures and materials can be added and tesseract can be set in any scene. dimensions: x: 4m y: 4m z: 4m
thingiverse
free
Hypercube
...hypercube
thingiverse
hypercube projected into three dimensional space.
thingiverse
free
Hypercube by alpheccar
...hypercube by alpheccar
thingiverse
projection of an hypercube on an hypersphere.
thingiverse
free
Hypercube by BorisBlavasky
...hypercube by borisblavasky
thingiverse
hypercube. testing the tool.
thingiverse
free
Hypercube by Christian42
...hypercube by christian42
thingiverse
i made a hypercube using rhino3d
thingiverse
free
Hypercube by Christian42
...hypercube by christian42
thingiverse
i made a hypercube using rhino3d
thingiverse
free
HyperCube by wwebber
...hypercube by wwebber
thingiverse
this is the standard perspective projection of the hypercube from 4d to 3d
thingiverse
free
HyperCube scaled by Muzeem
...hypercube scaled by muzeem
thingiverse
customized hypercube
300
3d_export
$17
Extra 300
...extra 300
3dexport
extra 300
design_connected
$27
Fortyfive 300
...fortyfive 300
designconnected
alberta fortyfive 300 computer generated 3d model.
design_connected
$27
DC 300
...dc 300
designconnected
ceccotti collezioni dc 300 computer generated 3d model. designed by de cotiis, vincenzo.
3d_export
$17
Airbus a340-300
...airbus a340-300
3dexport
airbus a340-300
3ddd
$1
Table 300
...table 300
3ddd
барный
.
archibase_planet
free
A340-300
...a340-300
archibase planet
air avia plane
airbus a340 - 300 airfrance - 3d model (*.max+*.3ds) for interior 3d visualization.
3ddd
$1
Smania Francisko 300
...smania francisko 300
3ddd
smania , francisko
smania francisko 300
3d_export
$30
airplanephenom-300
...om-300
3dexport
airplane_phenom-300 version: 2013 units: centimeters polys: 24,529 render: v-ray formats: 3ds max 2013, obj, fbx
turbosquid
$25
H03VV-F VmvS 300-300 2x0.75mm2.MAX
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
H03VV-F VmvS 300-300 2x0.5mm2.MAX
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.