Thingiverse
Hydroponic Bell Siphon by jneubeck
by Thingiverse
Last crawled date: 3 years, 4 months ago
This project is a bit of a work in progress but is part of a small 15" x 20" Ebb and Flow hydroponics system.
To avoid having to cycle the pump I have designed this Bell Siphon to connect to a 3/4-Inch Double Threaded Bulkhead. This ensure a water tight connection between the container and the reservoir. To ensure that no material gets in the siphon I have also designed a cover that lets water in but blocks most material.
My bell siphon has been designed to go in a standard Rubbermaid Bus/Utility Box that holds about 4.625 Gal. It Measures 5" x 20" x 15". The pipe has been fitted with a cap that helps get more water into the pipe and allows you to vary its hight by approximately 20mm.
Pipe
Material - Hatchbox PETG (red)
Resolution - .12
Build Plate - brim / tape and glue from glue stick
Infill - 25%
Supports: Yes touching base
Pipe Extender
Material - Hatchbox PETG (red)
Resolution - .12
Build Plate - brim / tape and glue from glue stick
Infill - 25%
Supports: Not needed
Cover / Bell / Caps
Material - PLA
Resolution - .12
Build Plate - brim / tape and glue from glue stick
Infill - 25%
Supports: Not needed
To avoid having to cycle the pump I have designed this Bell Siphon to connect to a 3/4-Inch Double Threaded Bulkhead. This ensure a water tight connection between the container and the reservoir. To ensure that no material gets in the siphon I have also designed a cover that lets water in but blocks most material.
My bell siphon has been designed to go in a standard Rubbermaid Bus/Utility Box that holds about 4.625 Gal. It Measures 5" x 20" x 15". The pipe has been fitted with a cap that helps get more water into the pipe and allows you to vary its hight by approximately 20mm.
Pipe
Material - Hatchbox PETG (red)
Resolution - .12
Build Plate - brim / tape and glue from glue stick
Infill - 25%
Supports: Yes touching base
Pipe Extender
Material - Hatchbox PETG (red)
Resolution - .12
Build Plate - brim / tape and glue from glue stick
Infill - 25%
Supports: Not needed
Cover / Bell / Caps
Material - PLA
Resolution - .12
Build Plate - brim / tape and glue from glue stick
Infill - 25%
Supports: Not needed
Similar models
thingiverse
free
Bell Siphon by MrMoneyBags
... a vertical hydroponics systems (hydrostacker). the inner tube is 1/2" cpvc pipe and the external pipe is 1" pvc pipe.
thingiverse
free
Bell Siphon by MrErdreich
...bell siphon by mrerdreich
thingiverse
bell siphon for aquaponics / hydroponics gardens
thingiverse
free
e9x front speaker blanking plate by modifyordie
...
petg
notes:
using abs, adjust z-axis offset.
use build plate adhesion -> brim
not check "brim only outside" in cura
thingiverse
free
Water hose adaptor - Happy Caravaner collection by Gontelnikov
... adaptor - happy caravaner collection by gontelnikov
thingiverse
enjoy)))
shell: 3-4
infill: 15-25
no support.
no brim, no raft.
thingiverse
free
1" Quick Connect Buckle by Hr2burn
...placement buckle for 1" straps i used petg, 60% supports, 15% infill, .2 resolution. holds solid for a 115# german shepherd!
thingiverse
free
Hydroponic Bell Siphon by g0bco
... through and into the bell siphon chamber
by printing a second base and nut the water feed into the container can be accommodated
thingiverse
free
Print in Place Hydroponics Plant-box by coogle
...barbed hose hookups on the back/front of it.
includes a built-in bell siphon for ebb-flow as well as a built-in water-in sprayer
thingiverse
free
Bell Siphon Endcaps by jup2000
...e bell siphon.
pictured is the original version. v2 has thicker limbs and is more of a snug fit to prevent sliding and breaking.
thingiverse
free
Interior sun by lenenok
...interior sun by lenenok
thingiverse
simple interior sun. infill 15%. rays need build plate adhesion type "brim".
thingiverse
free
Bell siphon standpipe top funnel by creuzerm
...and it looks neat.
parametric, you can set the number of 'petals' and size it to the pipe you are using for a stand pipe.
Jneubeck
thingiverse
free
Mason Jar - Insert by jneubeck
...oots you can transfer it to you hydroponic setup.
i printed mine using petg so there would be no issues with weakening in water.
thingiverse
free
LED Light using 40x35mm / 36x26mm COBs by jneubeck
...6mm cob and a 40x35mm cob. the heat sink is a standard 19x14mm aluminum heat sink. the 36x26 needs (2) and the 40x35mm needs (4)
thingiverse
free
Dividers for Storage Container by jneubeck
...ed click here:
containers: bangqiao adjustable plastic divider storage box container
filament: sunlu pla 3d printer filament gray
thingiverse
free
Buck Converter Case by jneubeck
...amp;psc=1&linkcode=sl1&tag=neubeck-20&linkid=01d25aa1e974a9096cd247acb9e6ac40&language=en_us&ref_=as_li_ss_tl
thingiverse
free
Spacecat - Launch pad v2 Case by jneubeck
...amp;psc=1&linkcode=sl1&tag=neubeck-20&linkid=5c1adcf1e26e86d2a2323754efe7a0b7&language=en_us&ref_=as_li_ss_tl
Siphon
thingiverse
free
My Customized siphon aquarium cleaner Siphon Inlet Filter
...my customized siphon aquarium cleaner siphon inlet filter
thingiverse
i use it for siphon aquarium cleaner
thingiverse
free
Bell Siphon by MrErdreich
...bell siphon by mrerdreich
thingiverse
bell siphon for aquaponics / hydroponics gardens
thingiverse
free
siphon capsule by devil0515937
...siphon capsule by devil0515937
thingiverse
siphon capsule thread 22x2.0. for a co2 canister 12gr
thingiverse
free
Bell Siphon by barontechnologies
...bell siphon by barontechnologies
thingiverse
bell siphon. easily scaled to fit your growbed.
thingiverse
free
Bell Siphon by bghost4
...bell siphon by bghost4
thingiverse
a bello siphon i designed for my kids to play with, in the bath.
thingiverse
free
siphon by sciencej
...siphon by sciencej
thingiverse
siphonhttp://sciencelove.com/2025
thingiverse
free
Bell Siphon by Dave46
...on, and a reduction "strangler" that goes in the throat of the siphon to reduce it to the size of my outlet pipe (13mm)
thingiverse
free
No suction siphon by gtorelly
...d for suction before starting the transfer of liquids, you just have to fill the siphon horizontally and then hold it vertically.
thingiverse
free
Gasket for plumbing siphon
...gasket for plumbing siphon
thingiverse
cad model https://grabcad.com/library/gasket-for-plumbing-siphon-1
thingiverse
free
Aquaponics Siphon Cup by Printermagic
...ermagic
thingiverse
this is a 3d printed cup to break the siphon in a aquaponics grow bed. edit to right height for your siphon.
Hydroponic
thingiverse
free
Hydroponic
...hydroponic
thingiverse
hydroponic
thingiverse
free
hydroponic vase
...hydroponic vase
thingiverse
hydroponic pot
thingiverse
free
Hydroponic Pot
...hydroponic pot
thingiverse
pot for hydroponic growing
thingiverse
free
Hydroponics pod by Aim_Inch
...hydroponics pod by aim_inch
thingiverse
this is hydroponics pod.
thingiverse
free
Hydroponics by LucasBicudo
...ydroponics by lucasbicudo
thingiverse
this is a small hydroponic system. it can feed up to 3 plants and relies on a water pump.
thingiverse
free
Hydroponic Pot by craigfrance
...france
thingiverse
hydroponic pot designed to fit through a 40mm hole in the hydroponic gulley. the pot is just under 50mm long.
thingiverse
free
Hydroponic Plant Pot
...hydroponic plant pot
thingiverse
hydroponic plant pot for 50mm net pot
thingiverse
free
Hydroponic Garden by JaGaBar
...hydroponic garden by jagabar
thingiverse
hydroponic garden with 6 pots and water level indicator
thingiverse
free
Hydroponic planter by Smithy120d
...roponic planter by smithy120d
thingiverse
a remix of modular hydroponic tower garden by boundarycondition. thing number 3405964.
thingiverse
free
1" Net Pot for Hydroponics
..." net pot for hydroponics
thingiverse
net pot for hydroponic systems,fits most hydroponic systems, large opening for roots.
Bell
thingiverse
free
Belle
...belle
thingiverse
this is belle from beauty and the beast.
thingiverse
free
Belle
...belle
thingiverse
this is belle from beauty and the beast.
thingiverse
free
Jingle Bell! Jingle Bell! Jingle Bell Rock!!!!!!!!!!!!!!!!!!!!! by shteffs
...jingle bell! jingle bell! jingle bell rock!!!!!!!!!!!!!!!!!!!!! by shteffs
thingiverse
jingle bell rock!
thingiverse
free
Door Bell From Bell
...door bell from bell
thingiverse
door bell
video wtih project: https://youtu.be/xrh5nxyd0ce
code:
thingiverse
free
Bell
...bell
thingiverse
a bell i designed for my step sister's shop.
thingiverse
free
Bell!!!!!! by GenericStudentss
...bell!!!!!! by genericstudentss
thingiverse
this is a bell!!!!!!!!!!!!!!!!!
thingiverse
free
Bell Division Bell by rudolf_franek
... onto your christmas tree or used as any other kind of decoration.
in my case i have put a jingle inside to produce actual sound.
thingiverse
free
Christmas bell
...christmas bell
thingiverse
a christmas bell for dekoration
thingiverse
free
Bell by Skuric1234
...bell by skuric1234
thingiverse
this is a bell, with a handle for ringing.
thingiverse
free
Bell by Teak
...bell by teak
thingiverse
small bell to be sand cast