Thingiverse
HVAC Blower by kobus910
by Thingiverse
Last crawled date: 3 years ago
This was a miniaturized version of an HVAC blower I designed(actual wheel diameter is 20" in real life).https://youtu.be/_26Szj1rbzs
I printed all parts with same settings, 0.2mm layer, 20% infill, used brim when having trouble with parts curling off bed(mainly the frames)
I got the motor from Digikey, part# 1597-1210-ND, then designed the motor housing to fit it with a small dip switch. Then used 12V A23 batteries inside to run the motor.
For the bearings I used 7/8" OD with 3/8" ID, can't get them in a lot of places.
Printed a belt using elastomer filament(just a circle the right size).
Then I super glued the parts together.
I mirrored the stl in Cura for both sides of the wheel, scroll housing, and for both frame sides required.
Various Bushing stl files included so you can vary your fan rpm as desired, or you can use a potentiometer to adjust the motor speed(hole in motor cap to mount the pot).
I printed all parts with same settings, 0.2mm layer, 20% infill, used brim when having trouble with parts curling off bed(mainly the frames)
I got the motor from Digikey, part# 1597-1210-ND, then designed the motor housing to fit it with a small dip switch. Then used 12V A23 batteries inside to run the motor.
For the bearings I used 7/8" OD with 3/8" ID, can't get them in a lot of places.
Printed a belt using elastomer filament(just a circle the right size).
Then I super glued the parts together.
I mirrored the stl in Cura for both sides of the wheel, scroll housing, and for both frame sides required.
Various Bushing stl files included so you can vary your fan rpm as desired, or you can use a potentiometer to adjust the motor speed(hole in motor cap to mount the pot).
Similar models
grabcad
free
Motor blower assembly
...ferred to as a cage or fan), which is spun by the motor, circulating the air within the housing and forcing it through the vents.
3dwarehouse
free
Blower Fan
.../heating-venting-cooling-hvac-parts-accessories-hvac-motors/n-5yc1vzc59s further reading: hvac blower fan testing & diagnosis
grabcad
free
BLOWER MOTOR ASSEMBLY
...ingle blower motor is responsible for delivering both hot and cool air, on demand, depending on how the climate controls are set.
grabcad
free
Motor Blower
...ingle blower motor is responsible for delivering both hot and cool air, on demand, depending on how the climate controls are set.
grabcad
free
Motor blower assembly
...hvac component that blows heated air through vents when the heating system is in use and blows cool air when ac system is in use.
grabcad
free
CAR BLOWER
... by pushing the air through the hvac system and out the vents.this model is actually mearnt to be an ac and dc powered car blower
grabcad
free
Motor and Blower Assembly
...lower assembly
grabcad
motor and blower assembly is used for hvac industry for generating positive pressure or negative pressure
3dwarehouse
free
blower wheel with housing assembly
...blower wheel with housing assembly
3dwarehouse
blower wheel with housing assembly and motor
thingiverse
free
ANET A8 light frame stabilizer by ashrafau
...and does not require a lot of filament, also you can print it without support, it works for both sides, print it with 20% infill
thingiverse
free
wheel and tire by JMLin
... slower when you print tpe.
i add a new wheel which has hole at both sides. the m3 screw head and m3 nut can hide into the wheel.
Kobus910
thingiverse
free
Toyota Rav4 Keychains by kobus910
...4, so thought i would whip up some new keychains.
two versions to choose from.
rav4-1 is just letters
rav4-2 is with backer plate
thingiverse
free
Zipper Pull Tag by kobus910
...r clip. i bought a small box of them at the dollar store. can be resized if you use larger ones. the opening is about 7/16".
thingiverse
free
Fridge Magnet by kobus910
...uot; thick, i dropped it in the hole a couple layers before the covering layer.
prints at any layer thickness, i used 20% infill.
thingiverse
free
Piston Keychain (Print in Place) by kobus910
...e. this small piece was able to test a few theories all at once.
i ran the print pretty slow so that the layers had time to cool.
thingiverse
free
Rubber Duck Switch Plate by kobus910
...20% infill. i designed the brim into the model because the default brim goes in weird places, so just have to trim off once done.
thingiverse
free
Large Puzzle Labyrinth Box by kobus910
...more and try to make more difficult, or a dual pin type of puzzle, who knows...
maze is puzzle.stl, the outer is puzzle shell.stl
Hvac
turbosquid
free
HVAC
...ac
turbosquid
royalty free 3d model hvac for download as max on turbosquid: 3d models for games, architecture, videos. (1211194)
turbosquid
$25
Jet Fan HVAC
...squid
royalty free 3d model jet fan hvac for download as max on turbosquid: 3d models for games, architecture, videos. (1274975)
turbosquid
$29
HVAC Air Rover Unit
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$32
HVAC Air Rover Unit 3D Model
...flow industrial hvac unit truespace cob 3ds dxf obj directx visualmotion
hvac air rover unit 3d model visualmotion 69294 3dexport
turbosquid
$50
Rooftop HVAC units collection (and other rooftop furnishings)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
archive3d
free
Ventilators 3D Model
...ventilators 3d model archive3d ventilation ventilation equipment hvac ...
3d_ocean
$5
Ventilator
...3docean air appliance blower desk detailed electric electro fan hvac oscillating realistic table ventilator high poly, very detailed...
3d_export
$10
Ventilator 3D Model
...3d model 3dexport table desk oscillating fan air blower hvac ventilator electric appliance realistic detailed ventilator 3d model eikester...
3d_export
$30
CGAxis Air Conditioner 12 3D Model
...conditioner 12 3d model 3dexport air conditioner fan blower hvac electric ventilator appliance photoreal detailed textures materials cgaxis air...
3d_export
$30
CGAxis Air Conditioner 11 3D Model
...conditioner 11 3d model 3dexport air conditioner fan blower hvac electric ventilator appliance photoreal detailed textures materials cgaxis air...
Blower
3d_export
$5
ball blower
...ball blower
3dexport
ball blower
3d_export
$10
engine blower assambly
...engine blower assambly
3dexport
engine blower assambly
3d_export
$5
air pipe blower
...air pipe blower
3dexport
air pipe blower
3d_export
$5
air hand blower
...air hand blower
3dexport
air hand blower
3d_export
$5
Blower Boom 3D Model
...blower boom 3d model
3dexport
boom blower
blower boom 3d model bkl1989 63079 3dexport
turbosquid
$44
blower-dxf
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
Old Blower
...l old blower for download as ma, max, gltf, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1638848)
3d_export
$7
zy series centrifugal blower
...zy series centrifugal blower
3dexport
zy series centrifugal blower
3d_export
$5
root blower compressor
...oot blower compressor
3dexport
you will get both .stl and .sldprt format of root blower compressor from here at very cheap rate.
turbosquid
$5
V8 engine with blower
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.