HUD shroud (Jeasun HUD X5) by endar

Last crawled date: 3 years ago

*Update after using it for a while I added a shorter version. The taller version blocks the top half of the tach depending on how your seat is adjusted.
Shroud for Jeasun HUD X5 to block glare from display while driving at night.http://www.amazon.com/gp/product/B01AJQ4VVI
HUD fits into shroud snug; depress rocking switch to install.
Hole in bottom of design is for easier removal.
Installed on a 2015 Honda Fit.
Cable routing instructions:
Pop the speaker out feed cable through from under the dash.
Attach a zip tie a few inches from the end of the cable.
Fold the end of the zip tie over and feed back under the dash until the end of the folded zip ties protrudes. Grab with needle nose pilers. you will need to push and pull to get the cable routed. Don't force it take your time.
go back under the dash and route cable above the steering wheel adjustment
zip tie to other wiring harnesses to keep cable away from pedals but leave slack on both ends for adjustment and to be able to unplug from you obd 2 port.