Hpi WR8 fifteen52 Rim(57x35)

Last crawled date: 4 years, 2 months ago

This rim is fifteen52 turbomac clone for 1/8 hpi wr8.
I'm sure it can fit some other brands and models, but I can't suggest it because I didn't check with any other model.
I tested it both of (aliexpress) aluminum options parts and original plastic chassis parts, works fine.
---Compatible---
...2.2"/57x80mm original hpi tarmac tire and gymkhana tire (#109747)/(#108076)
...12mm hex (#107876)
...Flanged Lock Nut M4 (#Z684)
It has same dimensions of the original rim (#117413)
---Note---
...I added two different file "model 1/model 2"
before you choose for print, please check out all shared pictures.
If you choose "model 2"; you have to complete some trimming after print!
(you can use lathe or drill but it has to be good balancing)
...Don't forget to drill air hole after print!(drill oppositely two hole/3mm)
...Support is only required for nut slot, which means you will get a smooth surface quality product!
...The strength of the product depends on the type of filament and the print settings!
...Not tested with original rc tire glue! I used a standard quick-drying very fine adhesive.
---My Ultimaker2 print setting---
...Nozzle / 0.4
...Layer Height / 0.1
...Shell Thickness / 0.4
...Retraction / Enable
...Fill Density / 100
...Print Speed / 60
...Support / Touching buildplate
...Platform Adhesion Type / Brim
...Cooling / Enable (start on the fifteenth or twentieth layer)
---Esun pla+ 2.85mm (black/white/yellow/green/grey)
---Temperature---
...Build Plate 50
-Print Head-
...White 215
...Yellow 215
...Black 210
...Green 210
...Grey 210
New rc accessories and equipment will be shared soon, follow my profile to not miss!