Hovership MHQ2 Cut by slapthemonkey32

Last crawled date: 3 years ago

This is the Hovership MHQ2 but cut and repaird with net fab, so now you can print this with a printer as small as a printer bot simple!! Hope this is helped! This will be 25 hours of printing if you use the following settings: 0.1 layer height, 1.0 shell 100% infill and print speed at 40mm/s. Here is a link to original project: http://www.thingiverse.com/thing:511668
From Hovership:
The redesigned 3D printed MHQ2 folding mini quadcopter frame has arrived! Building on the success of the original MHQ frame, we have improved the functionality, durability and stability of this frame. The MHQ2 uses the same arms and hardware from the MHQ with the addition of 4x more 18mm screws and 4x locknuts. The use of 6" props is possible with the new XL arms. Flight compilation video: https://www.youtube.com/watch?v=vrj7iZE8P1M
Printed kits available at: http://shop.hovership.com/hovership-mhq2/
Hardware kits available: http://shop.hovership.com/mhq2-hardware-kit/
Power system: http://shop.hovership.com/power-systems/
Propellers: http://shop.hovership.com/propellers/
KEY NEW FEATURES:
Redesigned base with greatly reduced torsion for better flight stability.
Camera and battery have a lower center of gravity. Both now mount down on the flight control deck.
Hardtail mounting: you can skip the clean layer and mount the top plate directly to the base.
Wider landing gear and slots on the underside of the baseplate for mounting the battery if preferred.
Improved landing gear thickness and durability.
Mounting holes for SMA extension cables.
Integrated GoPro and Mobius mount. Reinforced structure reduces damage in a crash and elevates the GoPro for the use of a USB live-out FPV cable.
Support for M3 "bobbin" style vibration dampeners.
Now with 35mm spacers to support flight controllers with straight header pins.
ASSEMBLY INSTRUCTIONS:
Available Online at: http://www.hovership.com/guides
RECOMMENDED CONFIGURATIONS
Full Component List (BOM): http://www.hovership.com/guides/mhq2-build-components-list/
Beginner pilots and lightweight FPV with a Mobius or smaller camera: 1804-2204 size 2300kv motors, 3-cell (3s) 1300-1800mAh lipo battery and 5? propellers
Beginner to intermediate pilots and FPV with a GoPro or similar action camera: 2204 size 2300kv motors, 3-cell (3s) 1300mAh lipo battery and 6? propellers
Intermediate to advanced pilots with GoPro or smaller camera: 2204 1960kv motors, 4-cell (4s) 1300mAh lipo battery and 5-6? propellers.
UPDATES
12.01.2014 - Added V2 of rugged arm. Added short version of clean-lower: this is 6mm shorter and should fit better on 200x200mm print beds (placed diagonally).