Hoodie R6 canopy by evilC_UK

Last crawled date: 2 years, 11 months ago

A canopy designed for Toothpick quads
Features
0 - 60 degree camera angle
Angle markings in 10 degree increments (Use an acrylic marking pen to make them easier to see)
Sufficient space underneath for Rx, VTx and capacitor
Cunning VTx antenna mounting system that allows antenna to be securely zip-tied to a mounting post, whilst still allowing canopy to be removed independently of the antenna
Weighs ~3.5g in TPU
Generous foot cutouts, makes it easy to solder on a new motor without having to remove canopy
STL included that suits Cadda Ant camera
Fusion 360 CAD file linked below so you can tweak parameters (Modify > Parameters). Edit the CameraFrontClearance parameter to tweak for other cameras
The rear foot should use a longer M2 screw than the front and side feet - the screw for the rear foot passes through the canopy without gripping it, and screws into the antenna holder.
Fusion 360 project: https://a360.co/3eude5w
Recommended settings for Cura slicer:
0.4mm nozzle
0.2mm layer height
2 Walls
2 Top / Bottom Layers
50% Cubic Subdivision infill
Tree supports (Makes it very easy to remove supports)