Honda Lawn Mower 8 in Tire retread by weasel7965

Last crawled date: 2 years, 11 months ago

After many years of mowing with a Honda lawn mower, the original tire tread was worn down. New tires seemed unnecessary because the rim was in great condition so I decided to design my own tread.
This two part tread fits perfectly on an 8 inch wheel. Simply cut off the original tread, and slip on each of these parts. The fit is snug to grip on the inner notches and the Male (M) side faces the outside of the wheel. Screw holes are present but not necessary. Align the Male and Female parts when assembling and gently tap into place with a rubber mallet or wooden hammer. It should fit very tight and lock onto the wheel.
Bonus, Looks like you have Lego wheels on your lawn mower now!