Thingiverse
Hole Saw Guide by albertk836
by Thingiverse
Last crawled date: 3 years ago
Guide to hold a 90mm (~3.5") hole saw in place while drilling ceramic tile. I put notches on the 4 sides to make registration (positioning) easier. Made it out of PLA at .27 mm and 10% fill. I used thin 2 sided tape to hold in place and a fair amount of water from a spray bottle while drilling (cutting). I put a small flange at the bottom of the hole, because my printer tends to make the first layer a little smaller. Not sure why???
Similar models
thingiverse
free
1.5" Tube Drill Guide
...1/2-20 tap, to accept a thread-in drill guide/bushing. simply run a tap thru the print, and screw in the bushing of your choice.
thingiverse
free
1 inch Corner hole drill guide by kevinanthony
...e for drilling a hole 1" away from each side of a corner. i use it for when making cajons to attach the bottom rubber feet.
3dwarehouse
free
Centre Cross-Drilling Jig
... to hold in place. drill the holes for the bolts while clamped in place to ensure the holes are aligned.) (drawn with sketchup 8)
thingiverse
free
Wet Tile Drill Guide 3/8in / 10mm by Barr12
...ble in store use some vhb tape between the guide and the tile to provide a water seal and hold the guide in place while drilling.
thingiverse
free
1.75" Tube Drill Guide
... 1/2-20 tap, to accept a thread-in drill guide/bushing. simply run a tap thru the print, and screw in the bushing of your choice.
thingiverse
free
Lack Filament Pass–Through by bmonty
...on the bottom of the table to center the hole saw and cut the large hole. this filament guide is based on the idea from @hobb3s.
thingiverse
free
Prop drill guide for DLE30, RCGF30 and other RC gasoline motors by tfrancis
...ted this in pla, 0.25mm layers, 25% infill with 6 perimeters, the included gcode file should work well with prussa i3 and clones.
thingiverse
free
Drill Guide for T-Track
...and bolt in place. i used 4mm flat head machine screws with a 4.3 mm drill bit. should work with drill bits a bit larger as well.
thingiverse
free
Drill-guide for half-round rods
...to be a few millimeters shorter, and put a wider washer on top when you drill, so you don't dig into the guide when drilling.
thingiverse
free
Filament Guide Printrbot Simple Winter 2013 Model by scrapin
...tures i have one that does not have holes. i printed it to test fit.this just gives you an idea of what it looks like from below.
Albertk836
thingiverse
free
Baluster Shoe by albertk836
...baluster shoe by albertk836
thingiverse
cover that goes around the base and top of baluster.
thingiverse
free
Battery Door by albertk836
...battery door by albertk836
thingiverse
replacement battery door for afro micro panel 1 variometer
thingiverse
free
Earlex Hose holder by albertk836
...oke the original hose holder and got a replacement from the company and a few months later it broke. : ( designed a replacement.
thingiverse
free
Relay Mount by albertk836
...(usa) electrical box (2 x 4) relay mount. uses a standard cover plate. i found white pla matches the white cover plate very well.
thingiverse
free
Battery Bin by albertk836
...
just a simple wall bin to store extra / off-size batteries.
2" deep x 2 3/4" tall x 7" wide (outside dimensions)
thingiverse
free
4 " PVC Cap Male by albertk836
...4 " pvc cap male by albertk836
thingiverse
male version of vented 4 inch pvc cap for furnace flu.
thingiverse
free
Desk Wire Grommet by albertk836
...erse
wire grommet for small cables, ie. network cables, 2 wire power cords, etc. hole in the counter/desk needs to be 1.25"
thingiverse
free
Board Clamp by albertk836
... because of the shape of the wood i was dealing with.
placed some holes in the clamping section to reduce the amount of pla used.
thingiverse
free
Bose RC48S2-27 Remote Wall Mount by albertk836
...8s2-27 remote wall mount by albertk836
thingiverse
wall mount holder for lifestyle remote control (the one with an lcd display).
thingiverse
free
Mosquito Like Model Rocket by albertk836
...ket similar to the old estes mosquito rocket kit. it accepts standard a - c rocket engines and has an 1/8" launch rod guide.
Saw
turbosquid
$1
Saw
...d
royalty free 3d model saw for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1390033)
turbosquid
$7
Saw
...alty free 3d model saw for download as obj, fbx, dae, and stl on turbosquid: 3d models for games, architecture, videos. (1481343)
turbosquid
$30
saw
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
Saw
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
saw
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Saw
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
saw
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$14
Saw
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
saw
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
Saw
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Guide
turbosquid
$15
Guide drawer
...squid
royalty free 3d model guide drawer for download as dwg on turbosquid: 3d models for games, architecture, videos. (1261387)
turbosquid
$1
Road Guide
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
archive3d
free
Guide-board 3D Model
...ion sign guide sign
guide-board n170112 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
turbosquid
$2
soap cutter guide
...
royalty free 3d model soap cutter guide for download as stl on turbosquid: 3d models for games, architecture, videos. (1694030)
turbosquid
$15
Blind Guiding tiles
...free 3d model blind guiding tiles for download as 3dm and dae on turbosquid: 3d models for games, architecture, videos. (1156598)
turbosquid
$69
Japanese Tour Guide
...d model japanese tour guide for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1614288)
turbosquid
$10
CNC Linear Guide
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Tank Model Guide
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Road Guide 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$9
Guide Books 3
...sformed separately and each have unique texture map on front and back cover. to make your work easier this model comes in thre...
Hole
design_connected
$9
Hole
...hole
designconnected
zeritalia hole shelves and storage computer generated 3d model. designed by derin design.
3ddd
$1
Magic hole
...magic hole
3ddd
magic
дизайнерское кресло magic hole
3d_export
free
black hole
...black hole
3dexport
3d rendering black hole in blender 2.9
3ddd
$1
Magic Hole
...magic hole
3ddd
philippe starck
magic hole - дизайн philippe starck (2010)
turbosquid
$4
Black Hole
...squid
royalty free 3d model black hole for download as blend on turbosquid: 3d models for games, architecture, videos. (1606724)
turbosquid
$5
security hole
...yalty free 3d model security hole for download as 3dm and max on turbosquid: 3d models for games, architecture, videos. (1669645)
turbosquid
$32
hole punch
... 3d model hole punch for download as 3ds, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1230702)
3d_export
$10
Black hole
...black hole
3dexport
a minimalist representation of a singularity
turbosquid
$50
Worm Hole
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
15 Hole
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.