Holder/Mount for M5STICKC based BMD Tally Light by cows2computers

Last crawled date: 3 years, 3 months ago

I am using the M5StickC as a tally light system for our Blackmagic Design ATEM switcher perhttps://oneguyoneblog.com/2020/06/13/tally-light-esp32-for-blackmagic-atem-switcher/
This mount has a hole in the bottom to put a 1/4-20 1/2" Pan Head bolt so it can screw into the mounting hole on the top of our BMPCC camera (or any other similar mounting hole).
Designed to allow the LED to show and access to all pinouts.
Nothing fancy on the design, just a simple/fast Tinkercad special. I have included the STL of the M5StickC I found.
UPDATE: 12/28/20
I wanted to be able to see the tally from the front of the camera for those on stage, so I added a LED from the end pins (G26 and Ground) and printed the case with a lens on the end. The lens is just transparent PLA, with a color change at 1.45 and 7.45 mm (so the tally is not so bright to the people to the right). You can also just print the whole thing in clear.
LED: https://www.amazon.com/dp/B06XPV4CSH/ref=cm_sw_em_r_mt_dp_vSQ6Fb23XMPBD?_encoding=UTF8&psc=1
I attached a no file with my final version of the code that worked with the G26 pins. I had to flip on and off and change the pin number. USE THE BLOG LINK ABOVE TO SEE HOW TO USE THIS FILE.