Thingiverse
HO Scale Windows by bwarz
by Thingiverse
Last crawled date: 3 years, 1 month ago
I have a Walthers Hardwood Furniture Company as well as the Bralick Building kits and wanted to combine them into one large structure. I also wasn't happy with the look of the windows and thought I'd try something different. Each of the main windows are different iterations, finally deciding on the 2b window. The two "open frame" files were attempting to print some frames to cut into 2x5 sets to make open windows in the main frames.
First of note, I use Cura 3 to print, and the files need to "print thin walls" option enabled as the window muntins are around 0.3mm wide. I've printed using ABS with a 0.4mm nozzle and 0.20mm layers as well as a 0.3mm nozzle with 0.16mm layers. Both have been with only a skirt (not brim). With the very thin extrusions, a slow speed is absolutely necessary. I have been having problems with adhesion on the outer edges of my bed (most assuredly cooler!) and ABS.
With ABS I have been unable to print either of the "open frame" designs. Hopefully I will have better luck with PLA!
First of note, I use Cura 3 to print, and the files need to "print thin walls" option enabled as the window muntins are around 0.3mm wide. I've printed using ABS with a 0.4mm nozzle and 0.20mm layers as well as a 0.3mm nozzle with 0.16mm layers. Both have been with only a skirt (not brim). With the very thin extrusions, a slow speed is absolutely necessary. I have been having problems with adhesion on the outer edges of my bed (most assuredly cooler!) and ABS.
With ABS I have been unable to print either of the "open frame" designs. Hopefully I will have better luck with PLA!
Similar models
thingiverse
free
Cat at Window by tigerklaue
...)
please solve the the image to be very careful. since it is so thin, you can solve it well with your fingernail.
happy printing.
thingiverse
free
Garmin eTrex HCx Bicycle Stem Mount by timon
...ed it on my reprap at 0.2mm layers with 0.3mm nozzle, abs with 25% infill, no support.
works really well, a tight friction fit.
thingiverse
free
ABS printable x-carriage for hypercube evo by svdmk
...beezen's" nut remix https://www.thingiverse.com/thing:2814140 of x-carriage. my carriage is printed with 2 bolted parts.
thingiverse
free
70mm Fan Holder for Lulzbot A0-101/Mendel by openbionics
...e walls are very thin and the model could do with some neatening up, i just printed it as a one off and cleaned it up afterwards.
thingiverse
free
sphere by wacomg
...re by wacomg
thingiverse
simple sphere
thin wall
spiral mode print
just test
0.3mm nozzle
0.2mm first layer
0.15mm other layers
thingiverse
free
Blind silly manual nozzle wiper blade
...minute in tinkercad.
better printed in very thin layers, about 0.05mm, still takes just a few minutes, so it's not too scaly.
thingiverse
free
Inductrix modified frame by babar121
...callops" has straight ducts, as well the fc board mounting holes have been adjusted so you dont need battery tray component.
cults
free
Easy to print Inductrix Quadcopter Frame
...ad frame. heavier than original frame, but pretty robust as well.
normal frame file for 0.5 nozzle, thin file is for 0.4 nozzle.
thingiverse
free
6mm Whoop frame, with or without ducts. by Rockracer
...s. by rockracer
thingiverse
the frame was designed to be printed with zero infill and a 0.3mm nozzle and 0.29 line width in abs.
thingiverse
free
Igus Bushing 8mm by Suljo
...ith nail rasp because of very thin walls. hope that prints are much better with 0.4 or 0.3mm nozzle.
hope they will worth to you.
Bwarz
thingiverse
free
4in duct inlet (paint booth) by bwarz
...th) by bwarz
thingiverse
needed to connect the 4in duct to my newly built paint booth and wanted to try the design. works well!
thingiverse
free
The Ultimate Spool Holder (TUSH)...Holder by bwarz
...the ultimate spool holder). down and dirty and nothing fancy. light on filament and spaces the holders at about 63mm on center.
thingiverse
free
Screw in velcro mount clip by bwarz
...unt for low plastic use and basic design. center hole mount and fits 3/4" wide velcro. #6 countersink wood screw to mount.
thingiverse
free
Custom right angle plug housing by bwarz
...rim an do some trimming after done. we will see how they hold up to the rest of the season! note this didn't need supports.
thingiverse
free
Traxxas Slash Tie Bar by bwarz
...irst set of c-clips on, the push the pins through the tie bar and through the bulkhead, put the other c-clips on from the rear...
thingiverse
free
Traxxas Slash 2WD Front Shock Tower by bwarz
... mount that needed just a small bit of trimming. other than that, fits nicely! lets see how it holds up....
thanks for reading!
thingiverse
free
Ork Style Scrap Barriers by JayMull420
...following : press to make corrugated metal siding - bwarz wheel for atv/utv 20mm diameter - forpost_d6 scrap armor...
thingiverse
free
Ork Style Mek Shop by JayMull420
...grid oil barrel by greendog99 corrugated metal imprints by bwarz 40k ork symbol by kombatunit monoprice select mini rotating...
Ho
turbosquid
$20
B32 HO
...oyalty free 3d model b32 ho for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1371749)
turbosquid
$30
HO SCALE
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
стол neri & ho
...стол neri & ho
3ddd
neri & ho
стол neri & ho
3d_export
$10
HO chair 3D Model
...ho chair 3d model
3dexport
3ds max9 v-ray model furniture chair ho
ho chair 3d model boroda 17480 3dexport
3ddd
$1
Neri & Ho
...
глубина (см): 36,2
материал каркаса: орех американский
материал обивки: кожа
все материалы и текстуры имею уникальные названия.
3ddd
$1
полки HO
...полки ho
3ddd
полка
полки, полка, полки "oh"
by gerard de hoop
turbosquid
$30
HO-Medieval-House.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
HO-Medieval-Well.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
HO-Medieval-Bed.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Табурет Neri & Ho
... nori & ho
табурет от neri & ho
материал : дерево, кожа
размеры : w 350 x d 350 x h 460 mm
Windows
3d_ocean
$3
Window
...window
3docean
window
a lowpoly window .
3d_ocean
$2
Window
...window
3docean
window
a lowpoly window.
3d_ocean
$2
Window
...window
3docean
window
a lowpoly window.
3d_ocean
$2
Window
...window
3docean
window
a lowpoly window .
3d_ocean
$5
Window
...window
3docean
window
a high quality window.
3d_ocean
$4
Window
...window
3docean
window
a high quality window.
3d_ocean
$4
Window
...window
3docean
window
a high quality window.
3d_ocean
$4
Window
...window
3docean
window
a high quality window.
3d_ocean
$3
Window
...window
3docean
window
a high quality window.
3d_ocean
$3
Window
...window
3docean
window
a high quality window .
Scale
turbosquid
$20
Weight scale or Bathroom Scale
...ght scale or bathroom scale for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1664576)
turbosquid
$19
Scale
...e
turbosquid
royalty free 3d model scale for download as fbx on turbosquid: 3d models for games, architecture, videos. (1411722)
turbosquid
$5
Scales
...s
turbosquid
royalty free 3d model scales for download as ma on turbosquid: 3d models for games, architecture, videos. (1393439)
turbosquid
$40
Scale
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$17
Scales
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Scale
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Scale
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$7
of scales
...s have a flat point of support. the samples are rendered in the standard cinema 4d renderer. enjoy your use and creative success.
3d_export
$5
scale knob
...scale knob
3dexport
scale knob
3d_export
$20
cartoon weight scale or bathroom scale
...cartoon weight scale or bathroom scale
3dexport
texture size:512px number of texture:1 texture format: png