Thingiverse
Hipro Server Power Supply Hack by madmike8
by Thingiverse
Last crawled date: 3 years ago
Disclaimer: WARNING! Modifying electrics is dangerous! Do so at your own risk. I'm an idiot! So doing the things I do is not safe.
PLEASE BE SAFE!
This is how I modified a Hipro HP-W500FF3 Server Power Supply for use on my printer. This would also work for the Hipro HP-R650FF3 PS.
Hipro HP-W500FF3 500W Server Power Supply
12v @ 41 Amps
5v @ 2 Amps
This has a slot style connection. With the Hipro label up, and facing the fan the top of the connector left to right under the fan.
^ ^ ^ ^ ^ ^ |----------| |----------|
1 2 3 4 5 6 Gnd. 12V
3 Ps_On
4 Ps_Kill
6 5vsb
Bottom side of the blade two larger pads are Gnd and 12v again
Remove the 5 screws shown
And open the case to make it easier to solder wires.
Pull the case up, and connect wires on the correct pads.
To turn on the power supply connect both Ps_On and Ps_Kill to Gnd.
You could connect a on/off switch between PS_On and Gnd, and a
Emergency Kill button between PS_Kill and Gnd.
I've made a cover to attach to a 20x40 extrusion for my printer.
I included the Openscad files so you can edit it for what you need.
I added a case that fully encloses the power supply.
PLEASE BE SAFE!
This is how I modified a Hipro HP-W500FF3 Server Power Supply for use on my printer. This would also work for the Hipro HP-R650FF3 PS.
Hipro HP-W500FF3 500W Server Power Supply
12v @ 41 Amps
5v @ 2 Amps
This has a slot style connection. With the Hipro label up, and facing the fan the top of the connector left to right under the fan.
^ ^ ^ ^ ^ ^ |----------| |----------|
1 2 3 4 5 6 Gnd. 12V
3 Ps_On
4 Ps_Kill
6 5vsb
Bottom side of the blade two larger pads are Gnd and 12v again
Remove the 5 screws shown
And open the case to make it easier to solder wires.
Pull the case up, and connect wires on the correct pads.
To turn on the power supply connect both Ps_On and Ps_Kill to Gnd.
You could connect a on/off switch between PS_On and Gnd, and a
Emergency Kill button between PS_Kill and Gnd.
I've made a cover to attach to a 20x40 extrusion for my printer.
I included the Openscad files so you can edit it for what you need.
I added a case that fully encloses the power supply.
Similar models
thingiverse
free
Emerson PSU endcap by Plattekerre
...howthread.php?1349770-converting-server-power-supply-emerson
i also added the sketchup file in case you want to change something.
grabcad
free
HP DPS-1200FB-1 1200W Server Power Supply
...upply. this is a rough and dirty model i made using calipers on a real unit. model for the fan came from delta, the manufacturer.
thingiverse
free
Dell DPS-670 power supply by martii
...
3 7 11 15 19 23
4 8 12 16 20 24
copper blades next to the pins (1-3) are gnd and 4-6 are 12v.
works great for my rc charger :)
thingiverse
free
How To Use a PC Power Supply With Your Printer!
...ly unplug it from main power for 2 min then re plug it in.
thank you
and be safe, please. electricity should always be respected.
thingiverse
free
Prusa MK3s Ventiation System by ScanuRag
...2v 2a power supply). please not that this was not designed for abs and it will not be adequate unless you use it in an enclosure.
thingiverse
free
Pi3B Case 2020 Extrusion Bear Frame with Regulator and Fan by padigree
...egulator, because i'm only remotely printing when i'm not at home - so the raspberry could relax in case i'm at home.
thingiverse
free
Power Supply HP DPS-750RB Case by mrdracul
...power supply hp dps-750rb case by mrdracul
thingiverse
case for rack server power supply
thingiverse
free
HP DPS-700GB 80mm fan shroud by SanguineDrone
....
please let me know if you have any questions or issues. printed on a lulzbot taz6 with .5mm nozzle head and .35mm layer height.
thingiverse
free
Prusa i3v10 Power Distribution Unit by glukz
...it while connecting or disconnecting some features (leds, fans, fume collector etc.).
copper component is pressed in with a vice.
thingiverse
free
HP DL380G5 power supply case by MrBrown666
...ent accidental shorts i designed this case.
it should also reduce vibrations transmitted to the table.
(model: atsn 7001044-y000)
Hipro
thingiverse
free
Z-case HiPro by ziptyze
...0a312 ) and m2 screws. after printing, use a soldering iron and a small screwdriver to melt the inserts in to place in the holes.
thingiverse
free
Corne HiPro case with M3 tenting by stifstof
...fied tenting case
this case has been modified to allow m3 nuts to be inserted into the tenting holes, rather than using threading
thingiverse
free
Revised Plates for Corne Keyboard HiPro Case by Scablands
...ryone some time fiddling with your plates, and again a big thanks to mburrows for the original case design. i use mine every day!
thingiverse
free
CRKBD 5 column HiPro Tenting Case by barbiera
... with this case.
huge thanks to the thingiverse, ergo mech, and crkbd communities for making my typing experience so much better!
thingiverse
free
Corne keyboard inclined long wrist rest by acuadraaros
...acuadraaros thingiverse use in combination with the corne keyboard hipro case (https://www.thingiverse.com/thing:3652379) by mburrows (go check it out!). https://www.thingiverse.com/thing:4229965...
thingiverse
free
CRKBD Bento Case
...my crkbd. it is fitted to the corne keyboard hipro case (https://www.thingiverse.com/thing:3652379) by mburrows (go check it out!). the...
3dwarehouse
free
fuente atx hipro ibm 8171
...fuente atx hipro ibm 8171
3dwarehouse
atx fuente de poder
3dwarehouse
free
Dometic HiPro Vision Mini-Fridge
...dometic hipro vision mini-fridge
3dwarehouse
-22'h x 15.94'w x 17.8'd -flip along axis to hand l/r
Madmike8
thingiverse
free
Still Bovine by madmike8
...still bovine by madmike8
thingiverse
a quick remix made to crudely look like still water... but with a cow.
thingiverse
free
Parametric Tube Corner by madmike8
...y madmike8
thingiverse
make corners for different sizes of aluminum tubes.
updated to flip it in the correct printing direction.
thingiverse
free
Jhead to Jhead Lite Adapter by madmike8
... use a jhead-lite hotend in a jhead extruder.
seems to work well with the jhead alex extruder and a course a jhead-lite hotend.
thingiverse
free
UM2 2510 fan to 3010 adapter by madmike8
...8
thingiverse
i liked xylenc4's design, but i wanted to keep the fan in the back. here's my changes to make that happen.
thingiverse
free
Modified Parametric Extruder by madmike8
...ports for the large nema opening and under the bearing support. i added a lever to the idler arm. the stl is for 1.75mm filament.
thingiverse
free
Prusa Mk2 Electronics case for KFB 2.0 Controller board by madmike8
...ronics case for kfb 2.0 controller board by madmike8
thingiverse
prusa mk2 style case for a kfb2.0 controller board and 40mm fan
thingiverse
free
FunBot Foot by madmike8
...uan.
if you want to follow along on the funbot build you can check out this thread.http://forums.reprap.org/read.php?166,429588
thingiverse
free
UA4C Speeduino EFI Case by madmike8
...a length between 8-18 will work.
the board can be purchased here: https://wtmtronics.com/product/ua4c-for-speeduino-va3-seawolf/
thingiverse
free
3010 5v Fan Top for Orange Pi PC Case by madmike8
...
i wanted to add a 5v 3010 fan to my orange pi case. so i remixed cyryllo's top. fan connected to gpio pins 4(+5v) and 6(gnd)
thingiverse
free
Airtripper Jhead-Lite Remix by madmike8
...d it printed at work. i will test for fit tonight.
edit: 5/15/14 added a relief for the strut.
edit: 5/19/14 corrected mistakes
Hack
turbosquid
$39
Hack Machine
...ree 3d model hack machine for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1277985)
turbosquid
$29
hacked screen
...3d model hacked screen for download as c4d, obj, fbx, and 3ds on turbosquid: 3d models for games, architecture, videos. (1633603)
3d_export
$5
armani hack
...armani hack
3dexport
table lamp italian design armani
turbosquid
$8
Mini Hack Saw
...odel mini hack saw for download as ma, max, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1178555)
turbosquid
$30
Leg Press Hack Squat
...ack squat for download as ma, obj, fbx, unitypackage, and upk on turbosquid: 3d models for games, architecture, videos. (1369244)
turbosquid
$9
gym Cybex Hack Squat
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
gym Leg Press Hack Squat
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Pick 3D Model
...pick 3d model 3dexport pick кирка picker hack pike moil pecker pick 3d model dambeldortv 96894...
archive3d
free
Worker 3D Model
...worker 3d model archive3d worker man builder workman worker hack n160512 - 3d model (*.gsm+*.3ds) for 3d...
3d_export
$20
Hacksaws 3D Model
...hacksaws 3d model
3dexport
hacksaw hack saw tool workshop garage metalwork woodwork
hacksaws 3d model pixelblock 29486 3dexport
Server
archibase_planet
free
Server
...
archibase planet
server pc workstation it equipment
server it-pc n270815 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
Server
...server
3dexport
3d_export
$10
Server cabinet
...server cabinet
3dexport
server cabinet built on solidworks software.
turbosquid
$50
Server
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$36
Server
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Server A
... model server a for download as blend, dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1694729)
turbosquid
$2
Server
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
SERVER
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
server
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$15
server a
...ance painter 2017 and rendered in bledner using eevee. model has two sets of uvs: one for texturing and one for lightmap backing.
Supply
turbosquid
$1
supplies
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
black supply
...black supply
3dexport
black supply size: 57.9 x 29.2 x 34 sm
turbosquid
$20
Office Supplies
...lty free 3d model office supplies for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1273636)
3d_export
free
office supplies
...office supplies
3dexport
turbosquid
$8
Supply Drop
...e 3d model supply drop for download as fbx, obj, dae, and stl on turbosquid: 3d models for games, architecture, videos. (1663721)
turbosquid
$75
Supply Helicopter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$65
Supply Ship
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Village Supplies
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
Power Supply
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
school supplies
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Power
turbosquid
$100
power
...ower
turbosquid
royalty free 3d model power for download as on turbosquid: 3d models for games, architecture, videos. (1421990)
3d_export
$5
Power
...power
3dexport
3d_export
$5
power outlets
...power outlets
3dexport
power outlets
3ddd
$1
lion power
...lion power
3ddd
лев , статуя
lion power gold sculpture
3ddd
$1
Sea Power
...
компас , море , часы
часы с компасом sea power
3ddd
free
Meridiani / Power
...power
3ddd
meridiani , круглый
стол power производитель meridiani, диаметр 120,высота 67
3d_export
$5
Power Surge
...power surge
3dexport
the power surge is a all mesh carnival ride to lower in game part count and lag
turbosquid
$8
Airport Ground Power Unit (AXA Power )
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$50
Power Houser
...rbosquid
royalty free 3d model power houser for download as on turbosquid: 3d models for games, architecture, videos. (1333800)
3d_export
$5
power outlet
...power outlet
3dexport
power outlet<br>format file maya 2018, 3d max 2017, obj, fbx