Thingiverse
hictop printhead backplane - ready for diamond hotend by megic
by Thingiverse
Last crawled date: 3 years, 1 month ago
hi everybody,
in order to be able to attach my new diamond-hotend properly to my hictop printer, i needed a replacement for the stock backplane. all other parts which i could find here had some drawbacks, so i decided to come up with my own.
this here features ALL the holes of the x-bearings, the wholes for my diamond-hotend-mix plus it has a unique feature on the side, which i call "universal-fix". You can use it to attach whatever thing from the side (fan, level-sensor, leds, camera...). just press in two nuts and you're ready to go.
lateron i will also post my mix of the diamond-hotend including a dummy e3d-coldend, as my hictop will only support 2 colors, while the diamond would feature 3.
have fun!
in order to be able to attach my new diamond-hotend properly to my hictop printer, i needed a replacement for the stock backplane. all other parts which i could find here had some drawbacks, so i decided to come up with my own.
this here features ALL the holes of the x-bearings, the wholes for my diamond-hotend-mix plus it has a unique feature on the side, which i call "universal-fix". You can use it to attach whatever thing from the side (fan, level-sensor, leds, camera...). just press in two nuts and you're ready to go.
lateron i will also post my mix of the diamond-hotend including a dummy e3d-coldend, as my hictop will only support 2 colors, while the diamond would feature 3.
have fun!
Similar models
thingiverse
free
D300VS Diamond Hotend Parts by jwellman
...d holder from here (which i believe is the same as the "stock" diamond holder):http://www.thingiverse.com/thing:1997927
thingiverse
free
10" inch touch display Raspberry Pi backplane and stand by Phyti1
...and which got broken. it should fit the other parts fine and also has all other holes which are as close as i could measure them.
thingiverse
free
Diamond Hotend - Cooler Shield for Prusa i3 / Rework / Toolson by TobyTetzi123
... my prusa / graber i3 with rework / toolson parts.
i made an adapter to mount with 23x23mm holes at the x-carriage.
regards toby
thingiverse
free
BTT ZSYong Mix Hotend for ProperPrinting tool change by nightilizer
...ould not commit to a non all metal hotend so i attached this using the pp tool changer. https://www.thingiverse.com/thing:3369444
thingiverse
free
Remix - Diamond hotend TEVO Tarantula X-axis carriage by galaxyman7
...d mount page and thingirob's carriage page.
note: i also attached a few more parts that are required for the diamond upgrade
thingiverse
free
Sparkcube Diamond Hotend by scuba
...ill the m4 mounting hole on the right side in your own.
i've also added an e3d v6 single nozzle mount as drop in replacement.
thingiverse
free
HICTOP Branding Cover - Put your name on the printer by igortopolski
...nsert with my nickname.
let me know if you like it in comments and make sure to click "i made one" when you print it :)
thingiverse
free
BLTouch Holder (Remixed CR-10 hanging 40mm fan/part cooler) by DrNeis
...itional bracket is need which can be found here: https://www.thingiverse.com/thing:2473423
feel free to comment or ask questions.
thingiverse
free
Enclosure for Five 3.5" HDDs With Handle Support by Blargedy
...lane.
the hdd handles that fit into this enclosure can be found here
see my specific version, which has fan cooling options here
thingiverse
free
Diamond Mixing hotend for Rostock by rchilso
...with mount/platform/light ring attached there is plenty of nozzle below the platform to not cause binding issues. hope this helps
Megic
thingiverse
free
foot for garden table by megic
...entering the table-foot. just for the fun of it, i added a kind of voronoi pattern on the bottom as a kind of anti-slide-profile.
thingiverse
free
Killswitch by megic
... it in place.
the ball joints could be a bit tighter - but i didn't want to risk the sides to break when inserting the hood.
thingiverse
free
Cafe Racer revisited by megic
...he fun of having airtires ;-)
have fun,
megic
ps: the logo is in just because it was a present to a special person - doesn't
thingiverse
free
Camper - Caravan by megic
... model, but it made me feel better ;-). the complete wheel is now fully round and it doesn't have holes in the back any more.
thingiverse
free
fishing rod holder protector by megic
...is to print protectors for the tip of the holder.
i did them in tpu with zero tolerance, so they fit nice and snug on the holder.
thingiverse
free
cheap arrow spare parts by megic
...eant to use against a styrofoam target. if you hit something harder with the pla-tip, you'll end up printing the next one ;-)
thingiverse
free
Slot car racing guide/blade - Leitkiel by megic
...s not a 1:1 copy but should fit good enough. but i must confess, i haven't tested it. did it for a friend - tests pending ;-)
thingiverse
free
pollin vise improvement part by megic
...sy fix to this. just print this part and attach it to the bottom of the moveable part - and tadaa... this vise is really good ;-)
thingiverse
free
compressed air pistol nozzle by megic
...t accordingly... i also don't have any idea, if this is used on other air pistols. mine has a marking "g4" on it...
thingiverse
free
dyson adapter by megic
...his one can turn around - i think it's an advantage - if you don't like it, you need to put little stoppers into the nut.
Backplane
thingiverse
free
CDTV Joystick Backplane by Tomse
...cdtv joystick backplane by tomse
thingiverse
amiga cdtv joystick backplane
3dfindit
free
Backplane Fiber Optics
...backplane fiber optics
3dfind.it
catalog: te connectivity
3dfindit
free
Backplane Power Connectors
...backplane power connectors
3dfind.it
catalog: te connectivity
3dfindit
free
Backplane Connector Housings
...backplane connector housings
3dfind.it
catalog: te connectivity
3dfindit
free
Backplane Guide Hardware
...backplane guide hardware
3dfind.it
catalog: te connectivity
3dfindit
free
Backplane Coding Keys
...backplane coding keys
3dfind.it
catalog: te connectivity
thingiverse
free
RC2014 Pro Backplane Tray by davidbro
...rc2014 pro backplane tray by davidbro
thingiverse
this is a basic tray for the rc2014 pro backplane.
3dfindit
free
High Speed Backplane Connectors
...high speed backplane connectors
3dfind.it
catalog: te connectivity
3dfindit
free
Hard Metric Backplane Connectors
...hard metric backplane connectors
3dfind.it
catalog: te connectivity
thingiverse
free
Aviation Radio Kit Backplane and Knobs (HMOOABRA_2016)
...2016)
thingiverse
backplane and knobs for kit # hmooabra_2016 (aliexpress, banggood). this is a work in progress - more to come.
Printhead
3d_export
$24
mechanical spider
...to 3d-print complex structures using its integrated spool and printhead it can also be used for all your mechanical...
thingiverse
free
Ultimaker printhead cover by Gijs
...ultimaker printhead cover by gijs
thingiverse
printhead cover to protect the wires on top of the ultimaker printhead
thingiverse
free
Modified printhead clamp by Striffster
... the part that sits on the carriage to make it easier to change printhead. fits http://www.thingiverse.com/thing:793689 carriage.
thingiverse
free
full printhead by bouverat3dprint
...full printhead by bouverat3dprint
thingiverse
printer wanhao 5s. filament ø3mm
thingiverse
free
101hero printhead carrier e3d by workshoptinkerers
...or a 4mm push-fit pneumatic fitting with m6 threads if a non bowden printhead was purchased.
added carrier for e3d v5 printheads.
thingiverse
free
Diamond 3-1 printhead home bracket by robmink
...ngiverse
use to level your bed. only use while the printhead is cold. i used this for the chinese knock off diamond printhead.
thingiverse
free
FLSUN Cube Dual printhead Mount remix by ReneDriessen
...flsun cube dual printhead mount remix by renedriessen
thingiverse
dual printhead carriage for flsun cube
thingiverse
free
Fan-duct E3d Printhead by Straub
...e3d printhead.
the duct is designed for a 12v radial fan who is used in mankati printers.
(manufacturer number: bfb04512hha-dv52)
thingiverse
free
Voron Cablechain Printhead by 3d-workshop
... compartment to store the printhead-connectors.
unfortunately all parts need to be printed with supports except the chain itself.
thingiverse
free
Anycubic Predator effector for Stoneflower3D printhead v2
...flower3d printhead v2
thingiverse
anycubic predator effector to use with stoneflower3d printhead kit v2 for 3d ceramic printers.
Hictop
thingiverse
free
Hictop - Adjustable z Endstop by ptk21
...hictop - adjustable z endstop by ptk21
thingiverse
adjustable z endstop for hictop
thingiverse
free
Hictop 3d LCD Befestigung by festus402
...hictop 3d lcd befestigung by festus402
thingiverse
hictop 3d lcd befestigung
thingiverse
free
Cable chain HICTOP by Insani3D
...cable chain hictop by insani3d
thingiverse
iniciando la modificación de nuestra hictop, se diseña una eslabón a medida.
thingiverse
free
hictop y belt mount by polpetras
...hictop y belt mount by polpetras
thingiverse
hictop aluminum prusa y belt mount
thingiverse
free
Pen Holder for Hictop ender by basolur
...pen holder for hictop ender by basolur
thingiverse
this is a simple pen holder to use a hictop ender as a plotter.
thingiverse
free
remix for hictop mount by chibi_hero
...iverse
edit. made recesses for mounting deeper.
remixed this with http://www.thingiverse.com/thing:1323225
for my hictop 3dp-11.
thingiverse
free
Hictop 3DP-17 Parts by Adranovik
...hictop 3dp-17 parts by adranovik
thingiverse
printed parts for the hictop prusa eds-17 with auto level
thingiverse
free
Hictop xaxis clamp by Gen0idea
...oken x-axis belt clamp on the hictop printer.
printed in a different colour to the original to differentiate it as a replacement.
thingiverse
free
Hictop xaxis clamp by Gen0idea
...oken x-axis belt clamp on the hictop printer.
printed in a different colour to the original to differentiate it as a replacement.
thingiverse
free
Hictop i3 RAMPS Board Cover
...hictop i3 ramps board cover
thingiverse
cover for the stock ramps 1.3 board on the hictop i3 clone (2015 model).
Hotend
thingiverse
free
hotend by fablab_lueneburg
...hotend by fablab_lueneburg
thingiverse
hotend model
thingiverse
free
Hotend for Graber
...hotend for graber
thingiverse
hotend complement pastes for graber printerhttps://youtu.be/0koxhnsuhdy
thingiverse
free
Hotend adapter by antaviana
...hotend adapter by antaviana
thingiverse
hotend adapter
thingiverse
free
hotend fan by mming1106
...hotend fan by mming1106
thingiverse
hotend fan
thingiverse
free
Hotend schema by ione
...hotend schema by ione
thingiverse
hotend project schema
thingiverse
free
Fabtotum XY Hotend holder for E3D Hotend
...s with integrated supports.
more for the project you can see here: https://kf-designs.com/2019/09/07/fabtotum-printer-conversion/
thingiverse
free
HotEnd Stand by onepointdiy
...tend, when you make your new hotend or repair your j-head or mg-plus hotend.
the hole of 16mm, please adjust using a reamer, etc.
thingiverse
free
fast magnetic hotend changer for Chimera Hotend by Draman
...chimera hotend !
and new basis (the hole from original is to small)
it is a remix form skimmy's fast magnetic hotend changer
thingiverse
free
Hotend Fan Adapter for MicroSwiss All Metal Hotend by jo_schi_man
...
thingiverse
little change for the hotend fan adapter to hold the microswiss all metal hotend (slightly longer and sharp edges).
thingiverse
free
Merlin Hotend by Alejanson
...merlin hotend by alejanson
thingiverse
this is a 1:1 drawing of the classic merlin hotend.
Diamond
3d_ocean
$5
Diamond
...monds. render details. model is rendered in mental ray and renders setup is ready. diamonds are ready to render and photo real...
3d_export
free
diamond
...diamond
3dexport
diamond
3d_ocean
$5
Diamond
...of cinema 4d. included: diamond, material and the studio! there are 2 files included : diamond.c4d : diamond.obj thank you for...
3d_ocean
$5
Diamond
...diamond
3docean
4d c4d cinema diamond glass shine
diamond 3d model in cinema 4d, ready scene to render.
3d_export
$5
diamond
...diamond
3dexport
diamond cnc laser -3d printer -cnc router
3ddd
$1
Diamonds
... diamonds
высота: 156 см
диаметр: 48 смhttp://www.moltoluce.com/index.cfm?seite=diamonds&sprache;=en
3d_ocean
$3
Diamond
...this is a highly detailed, realistic diamond model made in maya. included: diamond, material. files included are .mb, .lox, .obj.
3ddd
$1
DIAMOND
.... nightstand
master bedroom collection
measures:
width: 770 mm (30.31 in.)
depth: 370 mm (14.56 in.)
height: 480 mm (18.89 in.)
3d_export
$7
diamond
...diamond
3dexport
realistic diamond includes: - fbx obj stl & 3ds - keyshot files
3ddd
$1
Diamond
... капитоне , угловой
диван фабрики marinelli. текстуры в архиве
Ready
turbosquid
$51
ready
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Creature_pigman_print-ready
...model creature_pigman_print-ready for download as obj and ztl on turbosquid: 3d models for games, architecture, videos. (1283135)
3d_export
$10
alien ready for animation
...alien ready for animation
3dexport
alien 3d model ready for animation
3d_export
$10
Tractore Game Ready
...tractore game ready
3dexport
high poly game texture (tractor) game ready
3d_export
$5
Pickup TruckGame Ready
...pickup truckgame ready
3dexport
high poly game object (car) game ready
3d_export
free
tavern game-ready
...tavern game-ready
3dexport
game-ready tevern files: .fbx .blender .png
3d_export
$12
Game ready robot
...game ready robot
3dexport
black robot with a sword, game ready,melee,low poly,animetet
3d_ocean
$5
Ready for render scene
... 2013 or higher. need : 3d studio max 2013 or higher, v-ray 2.4 or higher, v-ray physical camera with d.o.f. – ready ! this much
3d_ocean
$20
Game ready Props
...game ready props
3docean
box props
this are 3d game ready props….the archive contains textures and psd files…enjoy
3d_export
$5
Game-ready Cat
...game-ready cat
3dexport
game-ready low-poly animated cat<br>walk, run and hit animations