Herringbone/Chevron reducer gear box 1x40 by rombaron 3d model
3dmdb logo
Thingiverse
Herringbone/Chevron reducer gear box 1x40 by rombaron

Herringbone/Chevron reducer gear box 1x40 by rombaron

by Thingiverse
Last crawled date: 3 years ago
Support with likes :)
Required parts:
2 bolts Din912 M3x25 for the gears (I changed these with 2 m3x50 bolts )
2 bearings M6x13
2 M6 nuts and washers
M6 thread ,length depends from the your purposes.
2 Bolts DIN912 M3x5 to mount the motor
4 M3 screws for the case.
I printed this project from ABS.
I want to check will it be enough to use the ABS printed gears or I need to use the nylon plastic.
Please LIKE and ENJOY ;-)
I used this reducer for the https://youtu.be/LZH9X3pOgashttps://youtu.be/j7NBBnuhz88
bolts increased the hole https://www.youtube.com/watch?v=KQ0P-mAIyds and why I replaced with M3x50

Tags