Thingiverse
Hermera mount block for Ender 5
by Thingiverse
Last crawled date: 4 years, 3 months ago
This is a robust mount block for the Ender 5 to mount a Hermera extruder assembly onto an Ender 5. This mod requires the removal and modification of the stock Ender 5 hotend carriage plate. Two 5.1mm diameter holes are added to the carriage plate. A 5mm to 5.3mm diameter hole is drilled on the X-axis rail of the printer. The hole on the rail provides access to one of the M5 button head screws used to secure the mount block. Once these mods are made it will no longer be necessary to dissassemble and remove the carriage to work on the Hermera assembly. Losening two screws is all that will be required to remove the Hermera extruder/hotend assembly.
This project is ongoing as I type and I will include the dimensions for the location and diameter of two holes that have to be added to the stock hotend carriage plate a a later date. The holes on the plate can also be transferred from the printed mount block.
The 5mm to 5.3mm access hole on the X-axis rail can be 150mm from either end of the rail.
12/13/19 Modified the file to lignten the part and now Hex and Square M5 nuts can be used to secure the adaper plate to the Ender 5 carriage plate.
12/13/19 Added PDF file with hole dimensions for the two requred 5.3mm diameter holes on the carriage plate.
12/13/19 Included pic of Nylon line material I used to provide a controlled arc for the extruder cables.
12/17/19 Added picture of my modifid Ender 5. I removed the front top frame cross piece and use it as an upright for the stock spool holder. Used corner braces to secure the side rails at the top corners. I substituted the stock Ender 5 extruder motor in place of the weak Z-Axis motor. The print bed no longer drops on its own with steppers diassabled. All of the stepper motor drivers VEF set to 900mV. Only the X-Axis motor hot to touch, but finger can stay in place. May decrease voltage at a later date.
Cable management needs to be improved.
12/23/19 Added file for new X-axis limit switch mount. Installs to X axis rail with two M5 screws and M5 T-nuts. One M4 x 12mm screw and nut to fasten the limit switch circuit board.
This project is ongoing as I type and I will include the dimensions for the location and diameter of two holes that have to be added to the stock hotend carriage plate a a later date. The holes on the plate can also be transferred from the printed mount block.
The 5mm to 5.3mm access hole on the X-axis rail can be 150mm from either end of the rail.
12/13/19 Modified the file to lignten the part and now Hex and Square M5 nuts can be used to secure the adaper plate to the Ender 5 carriage plate.
12/13/19 Added PDF file with hole dimensions for the two requred 5.3mm diameter holes on the carriage plate.
12/13/19 Included pic of Nylon line material I used to provide a controlled arc for the extruder cables.
12/17/19 Added picture of my modifid Ender 5. I removed the front top frame cross piece and use it as an upright for the stock spool holder. Used corner braces to secure the side rails at the top corners. I substituted the stock Ender 5 extruder motor in place of the weak Z-Axis motor. The print bed no longer drops on its own with steppers diassabled. All of the stepper motor drivers VEF set to 900mV. Only the X-Axis motor hot to touch, but finger can stay in place. May decrease voltage at a later date.
Cable management needs to be improved.
12/23/19 Added file for new X-axis limit switch mount. Installs to X axis rail with two M5 screws and M5 T-nuts. One M4 x 12mm screw and nut to fasten the limit switch circuit board.
Similar models
thingiverse
free
Ender 3 X Axis Linear Rails Plate Extended by jagerkti
...en the carriage holes and the hotend mounting holes by 3mm. this allowed be to get a nut in the back to attach the hotend easily.
thingiverse
free
Ender5+ hotend cover by Orangestuff
...cover by orangestuff
thingiverse
a simple remix to fit the stock ender 5 plus x carriage. uses the stock bltouch mounting plate.
thingiverse
free
Ender 5 Plus Linear Rail Conversion by GiulianoM
... then adjust the pulleys on the y-axis to compensate, then print another yacs x/y calibration part.
repeat above until satisfied.
thingiverse
free
Ender 3 - compact Hemera mount plate with BLTouch
...zzle_to_probe_offset { 64, 0, -1.00 }
#define x_bed_size 235
#define y_bed_size 225
#define x_min_pos -18
#define y_min_pos -12
thingiverse
free
Black Widow Extruder Mount by PhantomGT
... the x moving plate using the two upper holes. m5 & m3 tap might be required for threading. print with high infill preferred.
thingiverse
free
X endstop mount for Ender - 4 for stock carriage plate by Kookaburra88
...the endstop, but if you attach a stud on the downward facing side of the x-axis, you can use this as a moveable triggering point.
thingiverse
free
Ender 6 Linear Rail Mount X Carriage by Tertullidan
...s for fixing on the linear guide
the v4 bmg version is a remix of rics_3d extruder mounthttps://www.thingiverse.com/thing:4730903
thingiverse
free
3D Chameleon Mk2 Prusa Mini Mounts by wjsteele
...ns.
the editable design can be found on tinkercad here: https://www.tinkercad.com/things/hgyyl62dcql-3dchameleon-prusa-mini-mount
thingiverse
free
Ender 5 BMG Direct Drive Mount
... washers for bmg extruder holes, 3d printed
2x m3 x 30mm (mount to plate)
1x ptfe tube 92-94mm to use with stock hotend assembly.
thingiverse
free
Tevo Black Widow 15 Degree Extruder Mount by bdwalker1
...to the new end stop mount, in addition to the m4 screw and t-nut from the stock mount you will need:
1 x m3x10mm screw
1 x m3 nut
Hermera
thingiverse
free
Sidewinder X1 Hermera cooling
...tiv cooling duct for the sidewinder x1 with hermera extruder.
it fits without glue.
it is possible to print in petg with support.
thingiverse
free
Anycubic Chiron - Hermera Extruder Adapters
...nt the adapter.stl to the existing metal plate - and the adapter-stepper.stl to the extruder.
then bring together to make it fit!
thingiverse
free
Hermera Parts Cooling
... thicker to give some meat for the bolts to grip, closed the two holes on the backplate soit can be printed without hole supports
thingiverse
free
Ender/GeetechA10 Hermera stock cooling fan duct
...ikely redraw everything clean it up and make the version 2 with a better mounting option and possibly wrap further around as well
thingiverse
free
e3d Hermera / Hermes mount Rat Rig V-Core Pro
...vice you to block support in the screw holes.
best print direction is the one in the gallery
21.02.2020: initial release, testing
thingiverse
free
e3d toolchanger hermera filament guide
...y less bends so is a net win in my opinion. the scad file is parametric so sholud be easy to modify for your exact requirements.
thingiverse
free
MGN12H Hermera Carriage for 2040 extrusion with V slot Wheel Stabiliser
...2h carriage on a 20* profile extrusion..
you can mount a stabilising v slot wheel to the bottom if you mount on a 2040 extrusion.
thingiverse
free
E3D Hermera (Hermes) + Super Volcano Holder for MK3S
...mosfet-kit from e3d.
https://e3d-online.com/e3d-hemera-175-kit
hotend: 1.75mm and 24vhttps://e3d-online.com/the-e3d-supervolcano
thingiverse
free
Hermera Y Carriage - printable version
... you can use an m3 screw. it should hold into printed parts just fine for the cable bundle mount, bltouch mount, and fan shroud.
Ender
3ddd
$1
Enders / Elegance
...enders / elegance
3ddd
обогреватель
уличный газовый обогреватель enders elegance
высота: 2200 мм
3d_export
free
ender 3 frame cavity covers
... of the creality ender 3 - makes it look a bit more attractive it just slides into the open channels of the aluminium framework
turbosquid
$1
pen support for ender 3
...y free 3d model pen support for ender 3 for download as blend on turbosquid: 3d models for games, architecture, videos. (1611282)
3d_ocean
$9
Ender Dragon Minecraft
...ojang obj poly videogames
ender dragon minecraft created with cinema 4d r15 formats included: max 2013 – fbx 2012 – c4d r15 – obj
3d_export
free
Creality ender enclosure webcam mount
...e creality enclosure. sure is better than a tripod. change it up if it helps. i printed pla with 50% infill on my dd ender 3 pro.
3d_export
free
ender 3 enclosure corners
...er corners and 4 upper corners, using 25mmx25mm angled aluminium pieces that gets covered on inside of the frame with plexiglass
3d_export
free
ender 3 3d print bed clips
...ed + normal aluminium bed frame of the creality ender 3 = 6mm (b) these clips are designed for glass plate + aluminium bed = 4mm
3d_export
$5
GRUMPY CAT
...grumpy cat 3dexport grumpy cat to print in ender ...
3d_export
$5
Logs fire
...with one multi material for corona and vray r ender. albedo, normal, uvmap, roughness format jpg 4096x4096 models:...
3d_export
$42
excavator
...is the original size. 0.12 mm printing surface creality ender5 ...
Block
archibase_planet
free
Blocks
...blocks
archibase planet
blocks bricks toy
toy blocks - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
Block
...block
3dexport
3d_export
$10
The guillotine and the block
...the guillotine and the block
3dexport
the guillotine and the block autocad 2013
3d_ocean
$8
Concrete Blocks
... blocks, barriers or cover for characters during a fire fight. each one has its own diffuse map, specular and normal map in tg...
archibase_planet
free
Glass block
...glass block
archibase planet
glass block brick
glass block n211009 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$99
city block
...city block
3dexport
city block 3d model. include max, obj and fbx files.
3d_ocean
$3
Concrete Blocks Textures
...res
3docean
block blocks concrete seamless wall walls
a couple of seamless textures with two differents sizes of concrete blocks.
3d_export
$5
plummer block
...plummer block
3dexport
this is an 3d model of plummer block assembly where seven parts are required to assemble this.
design_connected
$16
Block 2
...block 2
designconnected
henry pilcher block 2 computer generated 3d model. designed by pilcher, henry.
3d_export
$7
concrete blocks on pallets
...concrete blocks on pallets
3dexport
concrete blocks on pallets, 3 types of blocks. there are all the necessary textures.
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)
5
turbosquid
$6
Rock 5-5
...urbosquid
royalty free 3d model rock 5-5 for download as obj on turbosquid: 3d models for games, architecture, videos. (1639063)
3d_export
$5
hinge 5
...hinge 5
3dexport
hinge 5
turbosquid
$10
A-5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
A-5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Calligraphic Digit 5 Number 5
...hic digit 5 number 5 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389333)
3ddd
$1
5 роз
...5 роз
3ddd
5 роз в стеклянной вазе
design_connected
$11
iPhone 5
...iphone 5
designconnected
apple iphone 5 computer generated 3d model.
3ddd
$1
Lola 5
...lola 5
3ddd
miniforms
lola 5 miniforms 300*65*134
3ddd
$1
Nexus 5
...dd
nexus , phone , телефон
google nexus 5 phone
3d_ocean
$15
iPhone 5
...iphone 5
3docean
3d 4d apple cinema iphone model modeling phone screen texture
iphone 5 3d model and texture realistic iphone 5.