Thingiverse
Heated and Filtered Enclosure Project by Razzter
by Thingiverse
Last crawled date: 2 years, 11 months ago
A heated and filtered printing enclosure is important when printing with ABS and some other materials to avoid warping of the part and breathing in harmful toxic compounds.
Using a HEPA filter design from Thingiverse and an enclosure box from Creality, and some guides online, I designed some additional parts to create my own heated and filtered enclosure for my 3d Printer.
My enclosure design is not perfect, and needs some improvement, but I'm sharing my parts list for anyone who may find it helpful and can build off of it further.
These parts uploaded here I created or remixed for my 3d printers' heated enclosure.
My enclosure consists of three parts:
Enclosure from Creality -- purchased off of Amazon
HEPA Filtration System -- downloaded from Thingiverse, with some parts purchased from Amazon and some printed parts I designed myself.
Heater Element -- Purchased from Amazon, with some parts I remixed from Thingiverse for mounting it inside my box.
CREALITY ENCLOSURE:
Enclosure - https://tinyurl.com/4x8n68kc
HEPA FILTRATION SYSTEM:
The HEAP Filter i downloaded off of Thingiverse was designed with a different type of mounting system, so I created a way to mount it on top of the enclosure. I fold back the flaps on the top of the enclosure and tuck it into the slots on Filter_Box_to_Enclosure_1.stl & Filter_Box_to_Enclosure_2.stl to create a seal. I then used a hot glue gun to try to improve the seal further. The hot glue gun is perfect because I can remove the glue if needed.
HEPA Filter System - https://www.thingiverse.com/thing:2394452
Filter_Box_Lock_1.stl, Filter_Box_Lock_2.stl -- Glue these to the HEPA filter system (https://www.thingiverse.com/thing:2394452) and use M3 screws and nuts to secure the carbon pellet chamber from popping open and spilling everywhere.
Filter_Box_to_Enclosure_1.stl & Filter_Box_to_Enclosure_2.stl -- This flat panel allows the HEPA filtration box to mount and place on top of the Creality Enclosure
Return_Hose_Attachment_to_Enclosure.stl & Filter_Box_to_Return_Hose.stl -- To attach the sump pump hose to the HEPA filter box on one side and to the enclosure on the other side.
Motor_Speed_Controller_Box_1.stl & Motor_Speed_Controller_Box_2.stl -- Housing for the motor speed controller.
Activated Carbon Charcoal Pellets - https://tinyurl.com/yd9kk2mm
Roomba 800/900 Filters - https://tinyurl.com/5zumusfk
12v 2A DC Power Supply (for filter fan)- https://tinyurl.com/4c8s27jf
Motor Speed Controller - https://tinyurl.com/wuye9k54
Fan for HEPA Filter - https://tinyurl.com/34pw6ank
1-1/4" Bilge Pump Hose - https://tinyurl.com/yk49wk3z -- To recirculate the filtered air back into the chamber.
M3 Screws Assortment - https://tinyurl.com/3dc4xmac
HEATER ELEMENT
The heater element I'm using gets up to 66C but isn't enough to bring the enclosure temperatures past 47C so I may have to add a second heating element or replace it with a different one.
The power supply I'm using is sketchy and gets kinda hot, and I'm not sure if it's providing enough amps to the heater block.
PTC_Heater_Box_with_Articulating_Arm_Attachment.stl -- To mount and position the heater element inside the box
Articulating_Arm_attachment_to_Enclosure_Frame.stl -- To attach the articulating arm to the Creality tubular frame.
Articulating Arm - https://www.thingiverse.com/thing:1897363
Heating Element - https://tinyurl.com/bj2zyfyb
Digital Thermostat Controller - https://tinyurl.com/4acjn5bj
12v 8A DC Power Supply (for heater)- https://tinyurl.com/9e7hs6
Fuse Holder (for heater) - https://tinyurl.com/3t78789a
M3 Screws Assortment - https://tinyurl.com/3dc4xmac
12v 8A DC Power Supply (for heater)- https://tinyurl.com/9e7hs6
Hope this helps!
Using a HEPA filter design from Thingiverse and an enclosure box from Creality, and some guides online, I designed some additional parts to create my own heated and filtered enclosure for my 3d Printer.
My enclosure design is not perfect, and needs some improvement, but I'm sharing my parts list for anyone who may find it helpful and can build off of it further.
These parts uploaded here I created or remixed for my 3d printers' heated enclosure.
My enclosure consists of three parts:
Enclosure from Creality -- purchased off of Amazon
HEPA Filtration System -- downloaded from Thingiverse, with some parts purchased from Amazon and some printed parts I designed myself.
Heater Element -- Purchased from Amazon, with some parts I remixed from Thingiverse for mounting it inside my box.
CREALITY ENCLOSURE:
Enclosure - https://tinyurl.com/4x8n68kc
HEPA FILTRATION SYSTEM:
The HEAP Filter i downloaded off of Thingiverse was designed with a different type of mounting system, so I created a way to mount it on top of the enclosure. I fold back the flaps on the top of the enclosure and tuck it into the slots on Filter_Box_to_Enclosure_1.stl & Filter_Box_to_Enclosure_2.stl to create a seal. I then used a hot glue gun to try to improve the seal further. The hot glue gun is perfect because I can remove the glue if needed.
HEPA Filter System - https://www.thingiverse.com/thing:2394452
Filter_Box_Lock_1.stl, Filter_Box_Lock_2.stl -- Glue these to the HEPA filter system (https://www.thingiverse.com/thing:2394452) and use M3 screws and nuts to secure the carbon pellet chamber from popping open and spilling everywhere.
Filter_Box_to_Enclosure_1.stl & Filter_Box_to_Enclosure_2.stl -- This flat panel allows the HEPA filtration box to mount and place on top of the Creality Enclosure
Return_Hose_Attachment_to_Enclosure.stl & Filter_Box_to_Return_Hose.stl -- To attach the sump pump hose to the HEPA filter box on one side and to the enclosure on the other side.
Motor_Speed_Controller_Box_1.stl & Motor_Speed_Controller_Box_2.stl -- Housing for the motor speed controller.
Activated Carbon Charcoal Pellets - https://tinyurl.com/yd9kk2mm
Roomba 800/900 Filters - https://tinyurl.com/5zumusfk
12v 2A DC Power Supply (for filter fan)- https://tinyurl.com/4c8s27jf
Motor Speed Controller - https://tinyurl.com/wuye9k54
Fan for HEPA Filter - https://tinyurl.com/34pw6ank
1-1/4" Bilge Pump Hose - https://tinyurl.com/yk49wk3z -- To recirculate the filtered air back into the chamber.
M3 Screws Assortment - https://tinyurl.com/3dc4xmac
HEATER ELEMENT
The heater element I'm using gets up to 66C but isn't enough to bring the enclosure temperatures past 47C so I may have to add a second heating element or replace it with a different one.
The power supply I'm using is sketchy and gets kinda hot, and I'm not sure if it's providing enough amps to the heater block.
PTC_Heater_Box_with_Articulating_Arm_Attachment.stl -- To mount and position the heater element inside the box
Articulating_Arm_attachment_to_Enclosure_Frame.stl -- To attach the articulating arm to the Creality tubular frame.
Articulating Arm - https://www.thingiverse.com/thing:1897363
Heating Element - https://tinyurl.com/bj2zyfyb
Digital Thermostat Controller - https://tinyurl.com/4acjn5bj
12v 8A DC Power Supply (for heater)- https://tinyurl.com/9e7hs6
Fuse Holder (for heater) - https://tinyurl.com/3t78789a
M3 Screws Assortment - https://tinyurl.com/3dc4xmac
12v 8A DC Power Supply (for heater)- https://tinyurl.com/9e7hs6
Hope this helps!
Similar models
thingiverse
free
Sicabo D180 active carbon filter flush-mount brackets. by MetalBill
...ond stage is the active carbon filter siccabo d180. the brackets hold the filter in place, i also provided a plug for the center.
thingiverse
free
12V LED Power Supply Enclosure by ShopsmithVsEvil
...c outlet and has enough room to hold 2 wall warts supplies. the box is designedto mount flush to a 1.75" electrical conduit.
thingiverse
free
HEPA Filter Enclosure by jmccluskey
...replacement filter, part # lv-h132-rf (on amazon)
fan: ac infinity axial 1238 w/ ac infinity, fan speed controller. (on amazon)
thingiverse
free
Hepa Filter mount - remix by evertc
...om countersink to borehole to facilitate head cap screws
the mount hole footprint and inner circle of the legs remained the same.
thingiverse
free
Printed Solid BOFA enclosure hose mount by Printed_Solid
....
you can see our line of enclosures and learn more about bofa air filtration at https://printedsolid.com/collections/enclosures
thingiverse
free
Lack Enclosure HEPA and VOCs Air Filter by Shawn_T_hingi
...se and top i trimmed some thin weatherstrip designed for windows to seal.
enclosed and in my bedroom i smell absolutely nothing!!
thingiverse
free
Lack Enclosure HEPA and VOCs Air Filter by Shawn_T_hingi
...se and top i trimmed some thin weatherstrip designed for windows to seal.
enclosed and in my bedroom i smell absolutely nothing!!
thingiverse
free
Ender 3 quiet Power supply
...#39;s sleep with my printer running.
links:
noctua fan-https://tinyurl.com/tvamazon1
buck converter-https://tinyurl.com/tvamazon2
thingiverse
free
Elegoo Mars 2 filter & heater by sashalex007
...ilterbody.
super-glue the heater to heatermount.
super-glue the filtermount to the heatermount.
assemble filter (1/8x1/2 bolts)
thingiverse
free
LACK enclosure MMU retrofit and ventilation parts by universaljoint
... lack enclosure, as well as some parts for a diy ventilation system based on a salvaged 90mm 12v fan from an old pc power supply.
Filtered
3d_export
$10
cartridge filter
...cartridge filter
3dexport
cartridge filter
3d_export
$6
Bag filter
...bag filter
3dexport
bag filter
3d_export
$10
of dust filter
...of dust filter
3dexport
3d model of dust filter
3d_export
$10
of bag filter
...of bag filter
3dexport
3d model of bag filter
3d_export
$7
of bag filter
...of bag filter
3dexport
3d model of bag filter
turbosquid
$20
Filter
...ty free 3d model filter for download as ma, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1512887)
3d_export
$10
bag filter
...he ash hopper. when the gas containing fine dust passes through the filter material, the dust is retained and the gas is purified
3ddd
$1
UFI Filter
...ufi filter
3ddd
фильтр , ufi
ufi oil filter
turbosquid
$30
Filter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
filters
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Enclosure
3d_export
free
electrical enclosure
...l enclosure where electrical devices like (relays, contactors, busbars ) are kept in order to protect from hazardous environment.
turbosquid
$100
GPU Enclosure
...yalty free 3d model gpu enclosure for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1381061)
3d_export
$5
Electrical Enclosure
...ed. also has tower lights attaced on the top.<br>file format that are available:<br>.step<br>.obj<br>.stl
archive3d
free
Enclosure 3D Model
...closure 3d model
archive3d
shower enclosure-acquarius- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-omega- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-vega - 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-zenith - 3d model for interior 3d visualization.
turbosquid
$20
shower enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$14
Dumpster Enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
3d printer enclosure
... model 3d printer enclosure for download as ipt, skp, and fbx on turbosquid: 3d models for games, architecture, videos. (1634310)
Heated
3d_export
$5
heat
...heat
3dexport
heat tool
3ddd
$1
electric heating
...electric heating
3ddd
обогреватель
electric heating
3d_export
$6
The heating module
...any questions also you can email to me. designed with solidworks 2017, render with keyshot **************************************
turbosquid
$2
Heating Radiator
...
royalty free 3d model heating radiator for download as blend on turbosquid: 3d models for games, architecture, videos. (1561908)
3d_export
$35
heating instalation with heat pump and solar system
...el , please contact me. before buying a model, you can try to download one of my free models and testing. thank you for watching.
turbosquid
$29
Heating Mantle
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
Heating Radiator
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
AT_airship_control_stand_(heated)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
AT_airship_(heated)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Heating radiator
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Project
3d_export
$7
project
...project
3dexport
project
3d_export
$20
Project
...project
3dexport
design_connected
$16
Project Chair
...project chair
designconnected
rex kralj project chair computer generated 3d model. designed by žitnik, marjan.
3ddd
$1
lectric Project
...настроены. сетка очень плотная.
доступно только для группы "profi"
про группу "profi" можно прочитать в чаво
3d_ocean
$19
Soon project
...kup. made in 3ds max 2013 1- 3dsmax with vray render included material and light 2- obj file 3- fbx file hope you like it plea...
turbosquid
$49
Joint | Project
...squid
royalty free 3d model joint | project for download as on turbosquid: 3d models for games, architecture, videos. (1297983)
turbosquid
$11
house project
...bosquid
royalty free 3d model house project for download as on turbosquid: 3d models for games, architecture, videos. (1672482)
turbosquid
$450
University project
...
royalty free 3d model university project for download as rvt on turbosquid: 3d models for games, architecture, videos. (1463354)
turbosquid
$30
smart projecter
...lty free 3d model smart projecter for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1236214)
3d_export
$5
project drawing
...project drawing
3dexport
project drawing and 3d model<br>format jpg sldprt dwg<br>by 3d make