Thingiverse
Headplay RHO-Lens Holder by Seamongrel
by Thingiverse
Last crawled date: 3 years ago
The RHO-Lens for the Headplay is brilliant, but I thought that there would be a better to insert the lens & hold it. Each time I tried to install it, I would end up with finger marks on the lens.
So here is my answer to the problem, a lens holder that is held in position where the orginal headplay lens was.
On the four lens holder tabs is a piece of double sided tape to hold the lens in place, then the lens holder plate is screwed into place with four M2 x 6mm screws.
To get the lens in the correct position, insert the lens holder into the bottom half the Headplay first and then rest the RHO-Lens on the nose bridge and push down onto the double sided tape.
The RHO-Lens is from here: http://rho-lens.com/index.html
So here is my answer to the problem, a lens holder that is held in position where the orginal headplay lens was.
On the four lens holder tabs is a piece of double sided tape to hold the lens in place, then the lens holder plate is screwed into place with four M2 x 6mm screws.
To get the lens in the correct position, insert the lens holder into the bottom half the Headplay first and then rest the RHO-Lens on the nose bridge and push down onto the double sided tape.
The RHO-Lens is from here: http://rho-lens.com/index.html
Similar models
thingiverse
free
ChildsTablet Holder by basilisk120
...ets with rubber bumpers. i made this to hold my kids tablets. can be screwed to the wall or held in place with double sided tape
thingiverse
free
Hairdryer Holder - Screw Hole Cap / Cover
... in place using double-sided tape. the tape worked like a charm, but i want to make it look better so i designed this hole cover.
thingiverse
free
Headplay RHO Lens Holder (rotated so no need for supports) by RVD98072
... by rvd98072
thingiverse
this is just a rotated version of an existing design so that you don't need to print with supports.
thingiverse
free
holder, scrub sponge by jjcarlock
...sponge holder for the kitchen so it would be out of the way and help to air dry. used double sided foam tape to hold it in place.
thingiverse
free
Wall Key Holder - Owls by Joss104
...wall key holder - owls by joss104
thingiverse
i plugged the screw holes and created 3 places for double-sided adhesive tape.
thingiverse
free
LedStrip angle holder by zumbefin
...d it for yeelight strip and it snaps beautifully in place.
you can fix it with 2 screws or double sided tape. screw size is 3x12.
thingiverse
free
Galaxy Watch Active Charger Holder (Harry Potter Glasses) by A_T_
...ht fit, but i didn't need to do any sanding.
i used one piece of double sided tape on each lens to hold the glasses in place.
thingiverse
free
Thermaltake P5 Horizontal GPU Holder Cover by squirtle_93
...5 horizontal gpu holder cover by squirtle_93
thingiverse
on each end there is space for double sided tape to hold it in position
thingiverse
free
Basic Aquarium Net Holder by LVLAsian
...er by lvlasian
thingiverse
basic fish net holder. to mount to the side of your fish tank
used double sided tape to hold in place
thingiverse
free
Kpod kcup holder- under cabinet by slarson6788
...
holds 5 kcups pods, mounter under cabinet, designed for 3 command release tabs but double sided tape or a screw would work fine.
Seamongrel
thingiverse
free
BOB Trailer Lanyard by Seamongrel
...bob trailer lanyard by seamongrel
thingiverse
replacement bob trailer lanyard
thingiverse
free
Arduino Uno Bumper by Seamongrel
...o bumper by seamongrel
thingiverse
arduino uno bumper
printed in abs on mankati xt
bed temperature: 65c
nozzle temperature: 245c
thingiverse
free
Mankati XT Door Handle Insert by Seamongrel
...mankati xt door handle insert by seamongrel
thingiverse
mankati xt door handle insert
thingiverse
free
Shimano XT 12 Speed Derailleur Cage Lock by Seamongrel
...12 speed derailleur cage lock by seamongrel
thingiverse
shimano xt 12 speed derailleur cage lock printed in abs with 100% infill
thingiverse
free
GoPro Remote 22mm Handle Bar Bike Mount by Seamongrel
...e
gopro remote 22mm handle bar bike mount with internal zip ties to clamp it to the bar.
update: v1 is the mount in landscape.
thingiverse
free
Flashforge Creatoer Pro 2016 Lid Holder by Seamongrel
...the print head moves back & fourth while printing small parts.
v1 has no writing on the front face if you prefer that option.
thingiverse
free
Mankati filament container holder by Seamongrel
...ent mount from inside the container.
the photo's should explain the rest, if not, post a comment if you problem.
mongrel.
thingiverse
free
Mavic Air 2 Quadlock Phone Case Hook by Seamongrel
...that protrudes out at the back of the phone case that does not allow the phone to be mounted securely into the remote controller.
thingiverse
free
Flashforge Creator Pro 2016 Silicone Boot by Seamongrel
...62190021883?_trksid=p2057872.m2749.l2649&sspagename=strk%3amebidx%3ait
the boots are designed to keep the nozzle heads clean.
Headplay
thingiverse
free
RX9850 case for Headplay goggle by wohenzhuce
... soldered on top of the pcb.
ps: the definition of this aviation connector is: 1. video in; 2. audio in; 3. gnd; 4.positive wire
thingiverse
free
Headplay Battery Holder by Cloudsmasher
...headplay battery holder by cloudsmasher
thingiverse
a small battery holder for the gopro mount.
thingiverse
free
Headplay True-D Diversity Pro 5805 by Kryptoo
...headplay true-d diversity pro 5805 by kryptoo
thingiverse
true-d diversity 5805 pro mod für die headplay hd.
thingiverse
free
Headplay HD Goggle SMA Antenna Mount by carrera0to60
... goggles to mount a patch style antenna. requires an extension to go from the stock antenna location to the front of the goggles.
thingiverse
free
Headplay FPV battery mount by Mysabre73
...t; style mount on the back of the headset.
i used supports at 10% infill with .25mm layers. it took less than an hour to print.
thingiverse
free
Headplay FatShark-Like Bay Dock by Ashade
...u can just plug the module, position it, and glue it.
i have also added a vertical, plain version for other non-headplay goggles.
thingiverse
free
Headplay FPV battery case by miharix
...les. one is ca. 40% deeper then other.
the source files(feecad) are for the smaller, so you can change the writing on the bottom.
thingiverse
free
True-D Mount for Headplay SE FPV Goggles by jaymaster2000
...can be figured out by looking at the existing video receiver wiring layout, the pcb has markings indicating which wire does what.
thingiverse
free
LaForge Diversity V2 Module (Buttons) for Headplay HD Headsets by Fredgineer
...g feature.
the idea was to make the laforge integration look as clean as possible.
it takes about a few hours to do all the work.
Rho
thingiverse
free
Christogram: Chi Rho
...christogram: chi rho
thingiverse
the chi rho is one of the earliest forms of christogram.
thingiverse
free
Chi Rho by catholicrobot
...o capital letters of chi and rho of the greek word for christ. the symbol has been historically used as a symbol of christianity.
thingiverse
free
Chi-Rho Alfa Omega
...chi-rho alfa omega
thingiverse
chi-rho symbol with alpha and omega
2 versions: in and out
thingiverse
free
Christmas Ornament - Rho by aeiouandsometimesy
...as tree. this one's for all you math nerds out there: the extrusion depth is 4.2cm and there are 7 sides to the hanging ring!
thingiverse
free
Modification to be used with RHO Lens HPRO by JuanTrillo
...ierto que es solo aproximado en las medidas de las lentes, al ser la superficie de apoyo del soporte la critica para este diseño.
thingiverse
free
Headplay RHO Lens Holder (rotated so no need for supports) by RVD98072
... by rvd98072
thingiverse
this is just a rotated version of an existing design so that you don't need to print with supports.
thingiverse
free
Fatshark Diopter Frames for RHO-Lens by pathfinderzero
...ns from an old pair of glasses using a dremel tool to cut the lens to 23mm x 16mm.
print using 0.1 layer height and 100% infill.
thingiverse
free
Eachine "Goggles One" RHO or prescription lens holder by chrishornby
...e that suits.
a video of sorts is at https://youtu.be/wjjivm_rdgg and includes an optional printed top to clamp the lens in place
thingiverse
free
Conic Fillet Ruler by chayesSAS
...is where the radius falls. -added an "r" above rho.4 marks to indicate it is a...
Lens
thingiverse
free
Telecope lens to GoPro lens by brdwlms
...telecope lens to gopro lens by brdwlms
thingiverse
used as an adapter from a 36mm lens to a 18mm gopro lens
thingiverse
free
77mm lens cap aspherical lens by ericauclairx
...e
my design for a replacement 77mm lens cap with aspherical lens with clearance for fisheye lens. has a strong grip on lens rim.
thingiverse
free
Lens adapter
...lens adapter
thingiverse
lens adapter
thingiverse
free
Lens cover
...lens cover
thingiverse
simple lens cover
thingiverse
free
Lens Hood for wide angle lens by daveb500
...lens hood for wide angle lens by daveb500
thingiverse
lens hood fits over a wide angle lens adaptor with a 63.8 outside diameter
thingiverse
free
Lens hood for small lens by mrphotomanseattle
...for small lens by mrphotomanseattle
thingiverse
lens hood for small lenses. of course, you can customize this any way you like.
thingiverse
free
lens for lamp
...lens for lamp
thingiverse
lens for lamp. just print in transparant and glue it together with the holder
thingiverse
free
Lens cap for 14mm lens by DonKracho
...things you gonna loose. univeral lens cap for lenses with 14mm outer diameter fitting for many fpv cameas. remove before flight;)
thingiverse
free
Lens Cap for 50mm Lens by TimmyKouf
...lens cap for 50mm lens by timmykouf
thingiverse
designed as a print in place using a printer with soluble support.
thingiverse
free
Lens by landsharkxx
...lens by landsharkxx
thingiverse
just a magnifying lens that i made to test out a process with resin printers.
Holder
thingiverse
free
Stubby holder holder
...der
thingiverse
bottom on the holder is sized for a can or bottle. top of the holder is sized for one in a cooler/stubby holder.
thingiverse
free
Soap holder holder
...soap holder holder
thingiverse
it's a holder to hold the famous soap holder.
thingiverse
free
bottle holder Jar holder can holder
...bottle holder jar holder can holder
thingiverse
hole diameter 38.6mm
thingiverse
free
Spool holder holder by vemotion
...spool holder holder by vemotion
thingiverse
pipe holder (16mm diameter)
thingiverse
free
smartphone holder with usb cable holder and key holder
...other of invention
this is my first creation basically smartphone holder with usb cable holder and key holder
i hope you like it
thingiverse
free
Holder of plate holders by budvar
...t; ;) holder for 5 pieces of modular plate holders from dave o https://www.prusaprinters.org/en/prints/15367-modular-plate-holder
thingiverse
free
Pen Holder/card holder by Pinky561
...pen holder/card holder by pinky561
thingiverse
a pen holder/card holder in one.
thingiverse
free
Toilet paper holder with phone holder
...toilet paper holder with phone holder
thingiverse
toilet paper holder with phone holder
thingiverse
free
Radio equipment holder and microphone holder
...radio equipment holder and microphone holder
thingiverse
radio equipment holder and microphone holder
thingiverse
free
Popsicle Holder Holder by billiamthesecond
...popsicle holder holder by billiamthesecond
thingiverse
keep popsicle holders upright so that they can be set down