HE3D K200 FSR Bed Mounts by W3DRK

Last crawled date: 3 years, 1 month ago

I created these simple bed mounts for an HE3D K200 delta so automatic bed leveling can be done using FSR sensors.
The FSR kit I use and designed this for can be purchased from UltiBots.com (https://www.ultibots.com/fsr-kit/). The pockets are sized to fit the silicone pads included with this kit.
Position the mounts 120 degrees apart from each other and fasten using M4 socket head cap screws, 8mm in length should work.
The aluminum bed should drop right into place and you can adjust the positioning of the mounts so the raised lip on them LIGHTLY holds the bed in place. You do not want the mounts to grip the bed tightly or the FSR sensors will trigger erratically.
The weight of the bed/glass on the silicone pads is enough to keep the bed from moving around. Clamp the glass down to the bed using 3x small binder clips.