Thingiverse
HC Maker 7 LCD case by scottypitcher
by Thingiverse
Last crawled date: 3 years, 3 months ago
A 2 piece case that assembles onto the Z axis frame support's M10 threaded rod (see https://www.thingiverse.com/thing:4608956). Note I haven't uploaded my working model of the HC Maker 7 yet so you won't be able to preview the model with the threaded rod inserted.
Other parts required:
8 x M3 nuts.
4 x M3x12 pan head machine screws.
4 x M3x18 pan head machine screws.
M10 Nylock nut.
The HC Maker 7 LCD board. Remove the knob and leave it off until you've assembled the new cabinet.
CAUTION: Be careful when removing the LCD board from the black HC Maker 7 control box. There are live mains voltage terminals inside the box so please make sure you unplug the power lead from the wall before you open the box. IT IS NOT SUFFICIENT TO TURN OFF THE POWER WITH THE MAIN SWITCH ON THE BOX, YOU MUST UPLUG THE MAIN POWER CORD FROM THE WALL.
After printing the the base and the front cover:
Press the M10 Nyloc nut into the base piece. This will ensure that the case stays in place when threaded onto the M10 rod.
Press 4 x M3 nuts into the back of the base, and then bolt the LCD board down to the base.
Thread the base assembly onto the Z axis frame support's M10 threaded rod, up to the desired height.
Fit the LCD board to the base piece and secure it with 4 x M3x12 bolts.
Press the 4 x M3 nuts into the bosses on the top and bottom sides of the top cover. To make sure they are aligned properly, insert an M3 bolt into each boss and try to engage the threads.
Place the top cover over the circuit board and fit it to the base, ensuring that the 2 ribbon cables fit into the recess provided at the bottom of the base. Fix the top cover in place by inserting 4 x M3x18 bolts into the holes on the rear of the base and screwing them up tight.
Fit the knob back to the control shaft on the top cover and fix in place.
---FIN---
Other parts required:
8 x M3 nuts.
4 x M3x12 pan head machine screws.
4 x M3x18 pan head machine screws.
M10 Nylock nut.
The HC Maker 7 LCD board. Remove the knob and leave it off until you've assembled the new cabinet.
CAUTION: Be careful when removing the LCD board from the black HC Maker 7 control box. There are live mains voltage terminals inside the box so please make sure you unplug the power lead from the wall before you open the box. IT IS NOT SUFFICIENT TO TURN OFF THE POWER WITH THE MAIN SWITCH ON THE BOX, YOU MUST UPLUG THE MAIN POWER CORD FROM THE WALL.
After printing the the base and the front cover:
Press the M10 Nyloc nut into the base piece. This will ensure that the case stays in place when threaded onto the M10 rod.
Press 4 x M3 nuts into the back of the base, and then bolt the LCD board down to the base.
Thread the base assembly onto the Z axis frame support's M10 threaded rod, up to the desired height.
Fit the LCD board to the base piece and secure it with 4 x M3x12 bolts.
Press the 4 x M3 nuts into the bosses on the top and bottom sides of the top cover. To make sure they are aligned properly, insert an M3 bolt into each boss and try to engage the threads.
Place the top cover over the circuit board and fit it to the base, ensuring that the 2 ribbon cables fit into the recess provided at the bottom of the base. Fix the top cover in place by inserting 4 x M3x18 bolts into the holes on the rear of the base and screwing them up tight.
Fit the knob back to the control shaft on the top cover and fix in place.
---FIN---
Similar models
thingiverse
free
Robo3D Z Rod Constraint by galaxius
...still has to slide onto the smooth rod.
slide onto the smooth rod and adjust so the threaded z rod is verticle.
tighten the bolt.
thingiverse
free
Mendel LCD Smart Display Controller Mount by rullmann
...ler mount. the cover was adjusted for the support distance and the supports were design to allow mounting onto the sells mendel.
thingiverse
free
TEVO Tarantula - Motherboard and LCD boxes by Elzariant
... not hesitate to leave me a little tip if you like the design. that helps me to pay the filament i waste when i print prototypes.
thingiverse
free
hand spinner by Saturdaypainters
...s to press the nuts slowly into place
3.glue the plugs into place on top of the nuts
4.sand smooth
5,add centre bearing and enjoy
thingiverse
free
Full Graphic Smart LCD Controller - Prusa i3 Hephestos - Support by Semml
...07.2015):
i added a second version of support because i want to place my rumba board and the threaded rod was blocking the space.
thingiverse
free
M2 Extruder Wiring Box by wcover91
... extruder motor hole with 2x m3x12 bolts 1x m3 captive nut.
4) the lid is secured to the box with 4x m3x8 button head cap screws.
thingiverse
free
CR-10 Frame Brace M10 No Bolts by TheSwaggamuffin
... the aluminium extrusion, no tee nuts or bolts needed.
recommend print out of petg for better fatigue properties compared to pla.
thingiverse
free
BrewPi Sensor Breakout Box
...ews into the holes on the case top, threading them into the square nuts previously inserted in the case body. do not overtighten!
thingiverse
free
Basic cover for power supply by plavan
...st heat the nut and insert to prepared hole for that. second, you should screw the cover to power supply with washers and screws.
thingiverse
free
Filament Roll Holder and Remote Guide by Portzal
...ormation to come.
m8 nylock nuts
m8 bolt or threaded rod
skate board bearings x 3
bowden tube press fitting x 2 for remote set up
Scottypitcher
thingiverse
free
HC Maker 7 foot extenders by scottypitcher
... the mounting blocks on the frame sit about 5mm below the feet, so i had to extend the feet slightly, hence these feet extenders.
thingiverse
free
Tp-link AC1600 (Archer VR1600v v2) wall mount bracket by scottypitcher
...k.
the model was produced with openscad. flip it upside down to print without suports.
the holes will take 6g countersunk screws.
thingiverse
free
HC Maker 7 Z frame supports by scottypitcher
...or the hc maker 7 model. you will have to comment that out to get it to render. i will upload the model separately at some stage.
thingiverse
free
HC Maker 7 Y axis bed stabiliser by scottypitcher
...t solution, we would have rebuilt the printer for that, but the linear bearings provide enough stabilisation for a good solution.
Hc
thingiverse
free
Panasonic Shoe Adapter for use with HC-V720, HC-V727, HC-V727, HC-X929,, HC-V750,, HC V777, VX870, HC-V727, HC-X929, VX878, HC-W850, W858, WX970, WX979 by boriswien
..., hc-x929, vx878, hc-w850, w858, wx970, wx979 by boriswien
thingiverse
shoe use from https://www.thingiverse.com/clobeca/designs
thingiverse
free
HC-SR04
...hc-sr04
thingiverse
hc-sr04
thingiverse
free
HC-05 / HC-06 by WDWHITE
...space.
also check out thing:1333056 customisable module socket for esp8266 hc-05 etc
as you can build a socket to fit the hc-05
thingiverse
free
HC SR501 PIR
...hc sr501 pir
thingiverse
hc sr501 pir
thingiverse
free
HC-SR04 by homer66
...hc-sr04 by homer66
thingiverse
hc-sr04 wall mount.
thingiverse
free
Bluetooth HC-06 HC-05 holder by ncherkasov
...c-05 holder by ncherkasov
thingiverse
just apply a bit of glue and under your hc bluetooth module and screw the holder in place.
thingiverse
free
HC-SR04 by 3DinkSMA
...hc-sr04 by 3dinksma
thingiverse
modelo 3d del sensor de proximidad hc-sr04
thingiverse
free
HC-SR04 Casing
...hc-sr04 casing
thingiverse
this is a casing & supporting for servomotor for hc-sr04 (ultrasonic distance sensor).
thingiverse
free
HC-SR04 by Juampe
...r04 support plate so it can be modified to fit other needs.
added a version for hc-sr04p (no xtal and pins are soldered in front.
thingiverse
free
HC-SR 04 Housing / HC-SR04 Gehäuse by SolarGermany
.../ hc-sr04 gehäuse by solargermany
thingiverse
i had the need for a hc-sr04 housing... this is my thing...
have fun & like
sg
Lcd
thingiverse
free
lcd-box(LCD Module 2004A) by jirayaboudboud
...lcd-box(lcd module 2004a) by jirayaboudboud
thingiverse
lcd-box(lcd module 2004a)
thingiverse
free
LCD stand lcd 12864 by puma2
...lcd stand lcd 12864 by puma2
thingiverse
lcd stand for geeetech pro b. so you can mount graphical lcd in front of y axis
thingiverse
free
I2C for LCD
...i2c for lcd
thingiverse
i2c for lcd.
thingiverse
free
Reprap 12864 lcd MKS lcd 12864A
...reprap 12864 lcd mks lcd 12864a
thingiverse
pictures lcd taken with aliexpress
good luck!
thingiverse
free
LCD framework by PENBERIC
...lcd framework by penberic
thingiverse
marco para lcd smart lcd controller
thingiverse
free
LCD case by vonyxxx_3d
...lcd case by vonyxxx_3d
thingiverse
it is case for lcd 1602.
you need lcd display1602.
thingiverse
free
LCD by jgarrog
...lcd by jgarrog
thingiverse
i hope someone may find it useful. my lcd, with its actual dimensions.
thingiverse
free
lcd box by nalbee
...lcd box by nalbee
thingiverse
lcd box
thingiverse
free
LCD Cover by HHeinricHH
...lcd cover by hheinrichh
thingiverse
lcd cover
thingiverse
free
LCD COVER by Helifreak1960
...lcd cover by helifreak1960
thingiverse
lcd cover
Maker
thingiverse
free
Maker Max Maker Coin by maxwilcocks
...maker max maker coin by maxwilcocks
thingiverse
this is my maker coin
thingiverse
free
Maker Coin
...maker coin
thingiverse
my maker coin
thingiverse
free
Maker Box Maker Coin by MakerBoxCollection
...er 2016 maker box. it used about 3.5m of 2.85mm filament with the settings listed.
designed by maker box co-owner nick moretto.
thingiverse
free
Maker Coin
...maker coin
thingiverse
maker coin-esque design i made in solidworks.
thingiverse
free
Maker Coin
...maker coin
thingiverse
my maker coin designed for my additive manufacturing course.
thingiverse
free
Maker coin
...maker coin
thingiverse
this is a maker coin that also doubles as a 1/4 in drive socket holder.
thingiverse
free
Maker Coin
...maker coin
thingiverse
this my maker coin which combines two of my passions: aircraft and 3d printing!
thingiverse
free
Maker Coin
...in
thingiverse
this is a maker coin with 45 degree angles on top and bottom of the print, a rounded interior, and a concave top.
thingiverse
free
Makers Muse Maker Coin by T-E-C
...makers muse maker coin by t-e-c
thingiverse
a maker coin as designed on the makers muse youtube channel.
thingiverse
free
Maker Coin
...maker coin
thingiverse
my maker coin with my intials. i also uploaded the blank coin for u guys to edit ur self
7
thingiverse
free
7*7 Drag Chain Ends by isiks_tech
...7*7 drag chain ends by isiks_tech
thingiverse
7*7 drag chain ends. seen on voron v0 & ercf.
thingiverse
free
RIP Windows 7
...rip windows 7
thingiverse
windows 7 is end of life. rest in peace windows 7.
thingiverse
free
7/8" to 7/8" Hose Clip. by mikers
.../8" to 7/8" hose clip. by mikers
thingiverse
7/8" to 7/8" hose clip. print with abs in high heat situations
thingiverse
free
Numero 7 by Xbertus
...numero 7 by xbertus
thingiverse
numero 7
thingiverse
free
Number 7 by Havrape1
...number 7 by havrape1
thingiverse
number 7
thingiverse
free
STEM 7 by forsetha
...stem 7 by forsetha
thingiverse
stem 7
thingiverse
free
dress2-7 by paulchancan
...dress2-7 by paulchancan
thingiverse
dress2-7
thingiverse
free
Bird-7- by Centaur
...bird-7- by centaur
thingiverse
bird-7-
thingiverse
free
Dragon-7- by Centaur
...dragon-7- by centaur
thingiverse
dragon-7-
thingiverse
free
A phone stand 7
...a phone stand 7
thingiverse
a phone stand 7
Case
thingiverse
free
Case
...case
thingiverse
case
thingiverse
free
Case
...case
thingiverse
case
thingiverse
free
case
...case
thingiverse
case for https://www.thingiverse.com/thing:4008790
case printed in surface mode
thingiverse
free
Case
...case
thingiverse
detector case first try
thingiverse
free
Case
...case
thingiverse
this is case for electrical components.
i used it for my led transformer.
thingiverse
free
Case
...case
thingiverse
this is a self created model of a case. it is desigend to be printed in a size of 15%.
thingiverse
free
case by milesman20051
...case by milesman20051
thingiverse
case
thingiverse
free
case by zyzomys
...case by zyzomys
thingiverse
case
thingiverse
free
CAse by Ryutaka18
...case by ryutaka18
thingiverse
case
thingiverse
free
case by johnboyjr
...case by johnboyjr
thingiverse
case