Thingiverse
Gudo Xy Core - By Charles Guy Doppia & Neotko
by Thingiverse
Last crawled date: 4 years, 3 months ago
First of all, this MOD uses ZGE as extruder but has parts that have been rebuild for this big mod that changes UMO/UMO+/UM2 gantry to CoreXY
It uses Bondtech as drivergears, Duet3D as mainboard and, to print I use TheOlssonRuby nozzles, just because for me they are the freaking best.
https://www.thingiverse.com/thing:2348263
All is ZIPPED for your maker enjoyment on one file, with step files, stl, etc.
General
Gudo and I made this, specially him but I pushed him over a year to reuse the umo/um2 frame into a CoreXY machine, since we both had many issues on UM2 gantry style to print fast, without vibrations and as fast as possible since we modded the machine into ZGE (small added weight on DD clearly shows how weak the XY gantry um2 style printers are and how limited the max speeds become)
So this mod is unfinished, but also finished, Gudo did pass away in the summer of 2018 and it took me quite some time to get strength and post all. Not just because work, but because it was a really sad thing to do, to post this without him.
But Gudo always wanted to share, create, improve and make better machines than what we have. This is an advanced mod, it requieres you to open step files, check stuff, and thing. You will need to align the parts so they print right, file MANY parts, to adjust them, insert tons of screws, get boxes of short/medium/long screws and check again and again where all goes. Thing of if as the most complex (and in the end you will see isn't that hard at all) diy-rebuild-printer.
How much stays and how much it goes from a UM2?
You keep the bed, hotend, frame, stepper motors and some pulleys and bearings. The controller board goes away, the belts, lots of smooth rods, all that goes away (except one that can be reused for the X, but I never did that, nilrog ( https://twitter.com/nilrog ) on twitter has that version from Gudo for his UM2GO-gudoXycore version. Will upload his zip for added mod fun if you are into this.
All the gantry installation is made by hand, I did design very easy corner guides for umo+ frame that help to make drills, they are very easy to make, just get the Step file with all assembled Gudo made, and do some booleans of the holes and make a printable guide, check mine for reference of what I mean. This will help you drill the holes for the hiwin/misumi rails.
To align the rails you just need to semi screw two top-bottom rails, not tight, and then adjust the distance relative to each side panel, use a fixed distance and align the rail, when is straight tight one, adjust the length and tight the other. If you did drill this correctly (remember to leave gap for screw movement so you can align all) the rest comes easily.
After setting both Y rails, when the X rails comes in, you can align the X using the panel as helper and the hotend. Push in front, check its perfectly align and tight the Y rail holders to the rains, side by side, slow and with patience.
Charles Guy Doppia, Gudo for me, made a Xy Core info that someone published onhttps://www.gecko3dprinter.com/2-assembly/5-xy-belts/
Mind that this is for the 3D Gecko, the machine we did toy with for quite sometime. Gudo tips will give you a bit of insight about what's important to keep an eye on the gudoXyCore.
More questions!??
For help and questions DONT PM me, please use public twitter post so keep info and answers public to everyonehttps://twitter.com/neotko/status/1215257844368453632
Video references that can be useful
Wiring and 5V fan cable on Duet3D 2.xhttps://www.youtube.com/watch?v=VNkVqTN0v_Y
How to change pins order on molex cables (if you need to switch motor directions can be usefull)https://www.youtube.com/watch?v=aXLPB5e71Ng
Small mod to plug PT100 cables on the Duet3D not exactly needed the 'solder' part, but usefull anyhowhttps://www.youtube.com/watch?v=GJCLiqsz_ho
How to CRIMP cables - Check minute 7+https://www.youtube.com/watch?v=tRU7LPtAVGw
FILES
Check the 'NEOTKO EXTRAS' folder
I made a Y rail holder that uses 1cm Square Aluminium bar as reinforcement, it does work great on 3 machines, but you will need to make a lot of drills and manual labour. If you want it easy, buy 2 rails for X, ofc it's more money, but....
Also check the CONFIG.G text file, it will help you setup the Duet3D faster, but not automagic, you need to read before using it.
BOM
Option A) Hiwin rails MGN9H for X x1 254mm / and 2x 275mm qty 3 ( or 275 and you cut them the wanted length)
Option B) MISUMI RAILS for Y x2 SELBV10-275-MC for X x1 SELBV10-254-MC
Note if you use MISUMI for the Y you need to adjust the front corners since their heigh is smaller, easy to boolean before printing
Bearings
F604ZZ 4x12x4 qty 18
625ZZ 5x16x5 qty 4 -
6800ZZ 10x19x5 qty 2 <- FOR zge motor holder
Motor Flex coupler
5mm x 5mm qty 2
Geared Bondtech motor qty 1
GT2 belt
You need at least 3m of GT2 6mm belts get good quality ones
Reusing UM GT2 20T pulleys
5mm motor pulley qty 2 (XY motor)
8mm pulley qty 1 (Z geared motor)
5mmx40mm motor pulley shaft qty 2 ( hobby car driving shaft could be used )
4mmx30mm Xrail bearing shaft qty 2 ( M4 x30mm set screws could be used)
Fasteners
M3 bolts and nuts :
6mm chc qty 8 (Yrail slider bloc)
8mm countersunk head qty 4 (Xrail slider bloc)
8mm chc qty 10
10mm chc qty 10
12mm chc qty 30
16mm chc qty 30
18mm chc qty 10
25mm chc qty 10
30mm chc qty 20
35mm chc qty 20
45mm chc qty 2 (XY pivot motor holder)
hex M3 nuts qty 100
square nuts qty 100
M4 bolts
30mm qty 10
35mm qty 10
square M4 nuts qty 10
IMPORTANT NOTE ABOUT BOM
Some screw numbers are APROX, Gudo never did the final BOM, but it's accurate. You might end having a few extras
Thanks to
Thanks to Duet3D for making a modern printer controler that can be adjusted easy and FAST without firmware rebuilding or boring stuff. Thanks to Bondtech for making such a highquality drivegears (just my oppinion, they never sent even a discount) and SPECIAL thanks to The Olsson Ruby, just just an amazing nozzle, but also Eric, Anders Olsson and all that cool guys that keep pushing the boundaries.
Also, special thanks to Foehnsturm. I did put Gudo and Him in contact years ago and they talked about how to improve and make the XY motors belt tensioning system, one of the key parts for this CoreXY to work as nciely as it does. If you don't know Foehnsturm, he's the guy that came with the Mark2 Tool changer and one of the most brilliant guys I know.
It uses Bondtech as drivergears, Duet3D as mainboard and, to print I use TheOlssonRuby nozzles, just because for me they are the freaking best.
https://www.thingiverse.com/thing:2348263
All is ZIPPED for your maker enjoyment on one file, with step files, stl, etc.
General
Gudo and I made this, specially him but I pushed him over a year to reuse the umo/um2 frame into a CoreXY machine, since we both had many issues on UM2 gantry style to print fast, without vibrations and as fast as possible since we modded the machine into ZGE (small added weight on DD clearly shows how weak the XY gantry um2 style printers are and how limited the max speeds become)
So this mod is unfinished, but also finished, Gudo did pass away in the summer of 2018 and it took me quite some time to get strength and post all. Not just because work, but because it was a really sad thing to do, to post this without him.
But Gudo always wanted to share, create, improve and make better machines than what we have. This is an advanced mod, it requieres you to open step files, check stuff, and thing. You will need to align the parts so they print right, file MANY parts, to adjust them, insert tons of screws, get boxes of short/medium/long screws and check again and again where all goes. Thing of if as the most complex (and in the end you will see isn't that hard at all) diy-rebuild-printer.
How much stays and how much it goes from a UM2?
You keep the bed, hotend, frame, stepper motors and some pulleys and bearings. The controller board goes away, the belts, lots of smooth rods, all that goes away (except one that can be reused for the X, but I never did that, nilrog ( https://twitter.com/nilrog ) on twitter has that version from Gudo for his UM2GO-gudoXycore version. Will upload his zip for added mod fun if you are into this.
All the gantry installation is made by hand, I did design very easy corner guides for umo+ frame that help to make drills, they are very easy to make, just get the Step file with all assembled Gudo made, and do some booleans of the holes and make a printable guide, check mine for reference of what I mean. This will help you drill the holes for the hiwin/misumi rails.
To align the rails you just need to semi screw two top-bottom rails, not tight, and then adjust the distance relative to each side panel, use a fixed distance and align the rail, when is straight tight one, adjust the length and tight the other. If you did drill this correctly (remember to leave gap for screw movement so you can align all) the rest comes easily.
After setting both Y rails, when the X rails comes in, you can align the X using the panel as helper and the hotend. Push in front, check its perfectly align and tight the Y rail holders to the rains, side by side, slow and with patience.
Charles Guy Doppia, Gudo for me, made a Xy Core info that someone published onhttps://www.gecko3dprinter.com/2-assembly/5-xy-belts/
Mind that this is for the 3D Gecko, the machine we did toy with for quite sometime. Gudo tips will give you a bit of insight about what's important to keep an eye on the gudoXyCore.
More questions!??
For help and questions DONT PM me, please use public twitter post so keep info and answers public to everyonehttps://twitter.com/neotko/status/1215257844368453632
Video references that can be useful
Wiring and 5V fan cable on Duet3D 2.xhttps://www.youtube.com/watch?v=VNkVqTN0v_Y
How to change pins order on molex cables (if you need to switch motor directions can be usefull)https://www.youtube.com/watch?v=aXLPB5e71Ng
Small mod to plug PT100 cables on the Duet3D not exactly needed the 'solder' part, but usefull anyhowhttps://www.youtube.com/watch?v=GJCLiqsz_ho
How to CRIMP cables - Check minute 7+https://www.youtube.com/watch?v=tRU7LPtAVGw
FILES
Check the 'NEOTKO EXTRAS' folder
I made a Y rail holder that uses 1cm Square Aluminium bar as reinforcement, it does work great on 3 machines, but you will need to make a lot of drills and manual labour. If you want it easy, buy 2 rails for X, ofc it's more money, but....
Also check the CONFIG.G text file, it will help you setup the Duet3D faster, but not automagic, you need to read before using it.
BOM
Option A) Hiwin rails MGN9H for X x1 254mm / and 2x 275mm qty 3 ( or 275 and you cut them the wanted length)
Option B) MISUMI RAILS for Y x2 SELBV10-275-MC for X x1 SELBV10-254-MC
Note if you use MISUMI for the Y you need to adjust the front corners since their heigh is smaller, easy to boolean before printing
Bearings
F604ZZ 4x12x4 qty 18
625ZZ 5x16x5 qty 4 -
6800ZZ 10x19x5 qty 2 <- FOR zge motor holder
Motor Flex coupler
5mm x 5mm qty 2
Geared Bondtech motor qty 1
GT2 belt
You need at least 3m of GT2 6mm belts get good quality ones
Reusing UM GT2 20T pulleys
5mm motor pulley qty 2 (XY motor)
8mm pulley qty 1 (Z geared motor)
5mmx40mm motor pulley shaft qty 2 ( hobby car driving shaft could be used )
4mmx30mm Xrail bearing shaft qty 2 ( M4 x30mm set screws could be used)
Fasteners
M3 bolts and nuts :
6mm chc qty 8 (Yrail slider bloc)
8mm countersunk head qty 4 (Xrail slider bloc)
8mm chc qty 10
10mm chc qty 10
12mm chc qty 30
16mm chc qty 30
18mm chc qty 10
25mm chc qty 10
30mm chc qty 20
35mm chc qty 20
45mm chc qty 2 (XY pivot motor holder)
hex M3 nuts qty 100
square nuts qty 100
M4 bolts
30mm qty 10
35mm qty 10
square M4 nuts qty 10
IMPORTANT NOTE ABOUT BOM
Some screw numbers are APROX, Gudo never did the final BOM, but it's accurate. You might end having a few extras
Thanks to
Thanks to Duet3D for making a modern printer controler that can be adjusted easy and FAST without firmware rebuilding or boring stuff. Thanks to Bondtech for making such a highquality drivegears (just my oppinion, they never sent even a discount) and SPECIAL thanks to The Olsson Ruby, just just an amazing nozzle, but also Eric, Anders Olsson and all that cool guys that keep pushing the boundaries.
Also, special thanks to Foehnsturm. I did put Gudo and Him in contact years ago and they talked about how to improve and make the XY motors belt tensioning system, one of the key parts for this CoreXY to work as nciely as it does. If you don't know Foehnsturm, he's the guy that came with the Mark2 Tool changer and one of the most brilliant guys I know.
Similar models
thingiverse
free
Customizable nema 17 stepper motor spacer by MoonCactus
...rint them in pla!).
the default spacing is 15mm but you can change it with the customizer, along with all other useful variables.
thingiverse
free
Beyond UMO & UM2 Slideblocks by Gudo & Neotko - GT2 Open Belt by Neotko
...ideblock. you can a) glue it, b) fuse with heat a bit the plastics so it never moves or c) print very slow and use the tight fit.
thingiverse
free
X-Axis Idler Pulley Alignment Clip for Monoprice Select Mini by USWaterRockets
...: https://hackaday.io/project/14823-monoprice-select-mini-maximum-3d-printer-mods/log/52155-keeping-the-x-axis-belt-from-twisting
grabcad
free
V-Belt Idler Pulley
...ad
v-belt idler pulley. in this pulley, we use following parts:
1) v-belt pulley
2) ball bearing
3) bushing qty. -2
4) snap ring
thingiverse
free
Mark 2 for UM2 and UM3 Cores by Gudo (Charles Guy Doppia)
...will need to print slow, or deburring edges and assemble with love, just like gudo made it, to be build with care and perfection.
thingiverse
free
Rotational Casting Machine (RotoCast) by Miaviator
... 3/4" schedule 40 pvc pipe
2 pvc elbows
staple gun (i stapled the gt2 belt to join it)
assembly should be self explanatory.
thingiverse
free
Sapphire Plus Experimental Mount by nimeq
...don't know how to rotate it to print it, it's probably not ready for your use. it needs to be mirrored to the other side.
grabcad
free
ZCarriageAssambly
...45
2 linear rails ø8x400
1 nema 17 motor support(50mm)
1 nema 17 motor
1 belt drive(gt2)
1 belt pulley(gt2)
1 belt pulley support
thingiverse
free
Ender 5 linear rail mod Y axis
...20mm travel (you have to put a bigger glass bed on)
if you like my design feel free to tip my designhttps://www.paypal.me/djdenzo
thingiverse
free
axis alignment tool for the Ultimaker S5 by UltiArjan
...ltiple tools are available already)
as the s5 has a 10mm x axis and a 8mm y axis you need 2 sets of tools, so print both tools 2x
Gudo
thingiverse
free
Mark 2 for UM2 and UM3 Cores by Gudo (Charles Guy Doppia)
...will need to print slow, or deburring edges and assemble with love, just like gudo made it, to be build with care and perfection.
thingiverse
free
Zero Gravity Extruder Direct Drive by Gudo & Neotko by Neotko
...ut
spring srew for the 2 extruder versions
1x 35/40 mm hexagonal head + nut
short zge spring pressure guide
2x 4mm x 18mm pin
thingiverse
free
Beyond UMO & UM2 Slideblocks by Gudo & Neotko - GT2 Open Belt by Neotko
...ideblock. you can a) glue it, b) fuse with heat a bit the plastics so it never moves or c) print very slow and use the tight fit.
thingiverse
free
UMO / UM2 - Experimental Vibration dampening foots by Neotko
...doing jobs with different heights. thanks to iroberti and gudo for the input and ideas to make this...
thingiverse
free
Titan E3D - East3DGecko 35x35x10 Delta Blowers Fancap by Neotko
...sure it stays there forever. a design based on gudo fan design. it's a beta so expect errors, but...
cg_trader
$6
Mai Gudo | 3D
...i will see if i can sort it out. mountain landscape volcano terrain environment nature photogrammetry elevation dem science other
Neotko
thingiverse
free
2020 Aluminium Extrusion Spool Holder for East3DGecko by Neotko
...y are your spools.
it's a beta and might give troubles, but i wanted something printable fast and easy to use or reposition.
thingiverse
free
Beyond UMO & UM2 Slideblocks by Gudo & Neotko - GT2 Open Belt by Neotko
...ideblock. you can a) glue it, b) fuse with heat a bit the plastics so it never moves or c) print very slow and use the tight fit.
thingiverse
free
Zero Gravity Extruder Direct Drive by Gudo & Neotko by Neotko
...ut
spring srew for the 2 extruder versions
1x 35/40 mm hexagonal head + nut
short zge spring pressure guide
2x 4mm x 18mm pin
thingiverse
free
East3D Part Coolers Blower Fans Mount by MegaMaking
...mount by megamaking thingiverse this design is inspired by neotko design, however, it is a complete remake without modifying...
thingiverse
free
UMO / UM2 - Experimental Vibration dampening foots by Neotko
...ananas sometimes when doing jobs with different heights.
thanks to iroberti and gudo for the input and ideas to make this better.
thingiverse
free
Mandalorian Inspired Ring 21mm (scale to your size ofc)
...your size ofc) thingiverse made it for fun for myselfhttps://twitter.com/neotkostatus/1217354724774764544?s=20 two versions, i like the shorter more now...
thingiverse
free
BCN Sigma Spacer for Mirror & Dual Modes & DISCO MODE ? by Neotko
...stions i answer much faster on twitter, if you leave a comment here spec slow speed on my answers.
http://www.twitter.com/neotko
thingiverse
free
Titan E3D - East3DGecko 35x35x10 Delta Blowers Fancap by Neotko
... bad in my experience for this but can work for a few months) will get deformed over time, so print more than 1 set just in case.
thingiverse
free
Da Vinci 2.0A Duo PLA fan holder 80cm by Neotko
...ratch.
note: both parts do 'clip' ok, but if you are going to print with it, please glue both parts to avoid surprises.
Doppia
3ddd
$1
Doppia T - P/633
...doppia t - p/633
3ddd
кресло
office chair doppia t - p633
3ddd
$1
Lumina Matrix Doppia suspension
...ina
наименование: matrix doppia suspension
фабрика: lumina
высота: 2000мм
ширина: 820мм
глубина: 110мм
материал: метал, стекло
3ddd
free
Paolo Lucchetta / art92 porta doppia
... дверь , двухстворчатые двери
http://www.paololucchetta.com/
3ddd
$1
Lumina Matrix
...lumina matrix 3ddd doppia , lumina , matrix светильник matrix doppia от фабрики...
3d_sky
free
Doppia T - P/633
...doppia t - p/633
3dsky
office chair doppia t - p633
3d_sky
free
Lumina Matrix Doppia suspension
...nsion
3dsky
lumina
name: matrix doppia suspension factory: lumina height: 2000mm width: 820mm depth: 110mm material: metal, glass
thingiverse
free
Doppia girandola /Double pinwhell by vidatox
...inwhell by vidatox
thingiverse
doppia girandola, necessita di uno stuzzicadenti
-
double pinwhell, need a toothpick for the pin
thingiverse
free
Doppia riga - relative numbers
...doppia riga - relative numbers
thingiverse
follow the operation on the line of relative numbers.
thingiverse
free
Ventola 30mm doppia per estrusore E3D-V6 by depri51giu
...ri51giu
thingiverse
progetto di ventola doppia raffreddamento estrusore e oggetto in stampa. ventola 30mm. disegnato con skethup
thingiverse
free
Doppia ventola estrusore E3D-V6 - Ventola 40 mm by depri51giu
...pri51giu
thingiverse
progettato doppio ventilatore raffreddamento estrusoree3d-v6 e oggetto . ventola 40mm.
usato sketchup-make
Xy
3ddd
$1
Вешалка напольная XY-027
...а штанги: 171 см
диаметр основания: 38 смhttp://mebelshopos.ru/aksessuary-ofisnye/veshalka-napolnaya-xy-027-detail.html
turbosquid
$9
XY Rectangular Dining Table
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
holly hunt xy bench
...eight: 17.75 in
width: 45 in, 26 in
depth: 18 in
больше превьюhttps://www.behance.net/gallery/24983999/bench-3d-model?
turbosquid
$8
Xy fine tuning handle adjusts the module
...odule for download as 3ds, max, ige, obj, fbx, stl, and sldas on turbosquid: 3d models for games, architecture, videos. (1331394)
3ddd
$1
pillows bed 2
...pillows bed 2 3ddd подушка , круглая dimensions: xy ...
3ddd
$1
Honeycomb Floor
...паркет parquet with metalic honeycomb floor demensions 500x500 cm xy multitexture +...
3d_export
$7
positioning screw mechanism
...and lead screw, constitute a double displacement adjustable mechanism, xy axis double position adjustable positioning.<br>**************************************<br>files format contains<br>-solidworks 2017<br>-step<br>-iges<br>- and...
3d_export
$9
positioning mechanism of heavy-duty platform
...activity -- ball mechanism activity ---- drive heavy load xy axis movement -- positioning completed<br>**************************************<br>files format contains<br>-solidworks 2017<br>-step<br>-iges<br>- and...
3d_export
$180
optical fiber laser marking machines assembly
...fiber laser marking machine<br>automatic loading and unloading laser marking machine<br>xy platform adjustable laser marking machine<br>laser marking machine used with...
thingiverse
free
XY ROBOT by ymtlab
...xy robot by ymtlab
thingiverse
xy robot
Charles
3ddd
$1
Charls Edwards
...charls edwards
3ddd
charlsedwards , charls edwards
люстра charls edwards
3ddd
free
Jonathan Charles
...jonathan charles
3ddd
jonathan charles
кровать jonathan charles
коллекция windsor collection
3ddd
$1
Charles Table
...charles table
3ddd
письменный
charles table
3ddd
$1
Charles Edwards
...charles edwards
3ddd
charles edwards
charles edwards - 8 arm deco chandelier.
obj and fbx included.
3ddd
$1
DelightFull Charles
... approx. 28kg | 61,6 lbs
bulbs: charles 20 - 20 x e27 bulbs | charles 40 - 40 x e27 bulbs (bulbs not included for north america)
3ddd
$1
Charles Bubbles
...rles bubbles
3ddd
charles
люстра
charles
bubbles
размеры: 1800x800x400, 20 ламп
сайт:http://www.charles.fr/index.php
3ddd
$1
Charles Archeo
...arles archeo
3ddd
charles
торшер
charles
archeo
art. 2251
размеры: 460x460x1840
сайт:http://www.charles.fr/index.php
turbosquid
$30
charles
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
Charles Angela
... angela
люстра
charles
angela
art.7309-0
размеры: d=1000 mm
сайт:http://www.charles.fr/index.php
3ddd
$1
Charles Oceanide
...charles oceanide
3ddd
charles , oceanide
dimensions:
62 x 23 x 17.5 cm
Guy
3ddd
free
Cristopher guy
...cristopher guy
3ddd
christopher guy , cristopher guy
cristopher guy
3ddd
$1
Christopher Guy
...christopher guy
3ddd
christopher guy
christopher guy
3ddd
$1
Christopher Guy
...christopher guy
3ddd
christopher guy
christopher guy
3ddd
$1
Christopher Guy
...christopher guy
3ddd
christopher guy
christopher guy
3ddd
$1
CHRISTOPHER GUY
...christopher guy
3ddd
551880 , christopher guy
christopher guy
3ddd
$1
Christopher Guy
...christopher guy
3ddd
christopher guy
столик christopher guy
3ddd
$1
Christopher Guy
...christopher guy
3ddd
christopher guy
стол christopher guy
3ddd
$1
Christopher Guy
...christopher guy
3ddd
christopher guy , письменный
christopher guy
3ddd
$1
CHRISTOPHER GUY
...christopher guy
3ddd
christopher guy
christopher guy factory
3ddd
$1
Christopher Guy
...christopher guy
3ddd
christopher guy
зеркало christopher guy
Core
turbosquid
$143
In the core
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Skandiform Core
...skandiform core
3ddd
skandiform
кресло фирмы skandiform, модель core.
габаритные размеры (шхвхг): 530х700х510 мм
turbosquid
$8
Chandelier CORE
...id
royalty free 3d model chandelier core for download as max on turbosquid: 3d models for games, architecture, videos. (1673910)
turbosquid
free
Planet Core
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Samsung Galaxy Core 2
...samsung galaxy core 2
3ddd
телефон
samsung galaxy core 2
turbosquid
$10
cable 2 core
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
cable 1 core
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Кондиционер ICE CORE
...кондиционер ice core
3ddd
кондиционер
37 000 полигонов
turbosquid
$65
Insulated Multi Core Cable
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Samsung Galaxy Core Advance
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.