grey water to 32mm spiral hose adapter for Rimor motorhome by Chameo

Last crawled date: 3 years ago

When I got my 2007 Rimor motorhome I wondered about it's grey water outlet. It's a simple hole on the underside operated by a slider.
But most european camping sites have grey water drains at every lot located near the fresh water tap. With the grey water outlet on my motor home these were unusable.
So I designed an adapter to a 32mm spiral hose which is commonly used for this purpose.
For better printability the part was divided in two parts which have to be (super)glued together after printing. For a better watertightness I recommend to coat the inner side with a clear paint.
To clamp the adapter to the outlet you'll need a M5 screw and nut. If your are using ABS material, scale the model up about 1-3% to compensate the shrinking.