GoPro Clone Action Camera to Binocular 3d model
3dmdb logo
Thingiverse
GoPro Clone Action Camera to Binocular

GoPro Clone Action Camera to Binocular

by Thingiverse
Last crawled date: 4 years, 3 months ago
An adapter to couple a GoPro clone (4K Ultra HD Action etc) to a Haco 7x50 binocular. Openscad source provided (bit rough round the edges but it works).
This is Mark III - The final idea was to get the camera lens close to the eyepiece lens.
You may need to adjust the camera hole diameter for a tight fit... the o-ring helps provide a tight fit on the binocular eyepiece. You may also need to adjust the taper to suit your eyepiece (camera_ring_thickness 1 & 2). Elastic bands might do in lieu of o-ring if you don't mind ugly.
Printed ok with PLA & ABS - 30% infill, support.
By the way, Zalophus's tripod adapter worked well with my binoculars and seemed the simplest design available here at the time.
[Binocular Tripod Adapter]( https://www.thingiverse.com/thing:1008948)

Tags