Gloomhaven Player Dashboard STACKABLE + 26 HP/XP Tracker - English

Last crawled date: 4 years, 2 months ago

Like with the original stackable, this needs supports under the middle area. I used custom supports in Cura and they worked great. I even accidentally printed one without supports and while the bottom was a mess, the top came out fine and the board was completely functional. Once I cleaned up the bushy mess on bottom, you can't even tell it was printed without support.
It prints fine on my Ender 3 with a .4 nozzle, 10% infill, and 60 speed at even .28 resolution. (Hatchbox Silver PLA.) I don't have a .6 nozzle like the version this is remixed from was designed for, so I don't know how these slightly smaller numbers will come out on such a large nozzle.
I've been playing with the HP/XP sliders trying to get them just right. You can use the ones from the last version, but lower the Z axis down to 78.87% which is how much smaller the v-grooves inside the tracker slots are now.
I've also found that printing the sliders with the semi-flat side facing down with support for the shelf part makes for a cleaner slider than printing it tip-down with a brim. YMMV.