Gloomhaven Insert with Monster Storage Containers by RubiksTesseract

Last crawled date: 3 years, 4 months ago

Storage system for the original Gloomhaven. It uses individual storage containers for each monster which are printed as a single part without supports. The labels on the container were printed in a single color and colored with a black permanent marker and are these labels:https://www.thingiverse.com/thing:3013163
with the 6 larger labels replaced with these:https://www.thingiverse.com/thing:4714101
Each monster's deck of cards goes below the label and the label slides into place. The container can be used while playing in place of the monster sleeves the game provides, but each container only has 6 spots so you might want to use the provided sleeves when you have more than 6 of that monster.
BossStorage is used for the boss monsters and only printed once, MonsterTripleStorage is used for Imps, Shaman, Archers, and Guards so you'll need 4 of them. The rest of the monsters use MonsterStorage.
I included the hex tile storage I used, but the tiles don't fit well and the print require a little modification after printing so I would recommend using a different method. I might come back and fix them later but they work well enough here. I used 2 HexTilesAlt and 4 HexTiles.
The boxes are all designed to fit sleeved cards.
The GarbageGutter goes in the empty space between the monster storage containers and the class boxes at the top of the first picture. It's where I put the things the game tells me to throw away and is not a necessary piece to print but it holds the storage system together a little better.
This whole print used around 2-2.5 kg of filament, and is designed in a way which makes setup significantly faster. Everything was designed to be printed on a 120 x 120mm build surface and took me a few weeks of non stop printing to complete.