Glasses Wall Mount - 5 Piece by VanBot112

Last crawled date: 3 years, 1 month ago

Here's a wall mount for 5 pairs of sunglasses or eyeglasses. The holes for mounting are 2mm in diameter and work well for most small nails or even a thumb tack. The 5 pegs are each 7mm wide at their widest point and point upwards a few degrees to keep the glasses in their spot.
I designed and rendered in Fusion 360, and have provided the STEP files in case you'd like to make any changes of your own. I had it all rectangular and boring to begin with but added some spline-like waviness to give it a twig-like look.
You'll see 3 STL's ready for printing.
The one labeled "1 Pc" is meant to be printed in one piece and will fit on 8 inch beds and larger, when printed at a diagonal.
The other two, labeled "Top Split" and "Bottom Split" are meant to be broken down and printed on smaller printers. The longer of the two is still roughly 160mm Long. There is one dovetail-style snap joint meant to fit the two together, with a tolerance of .25mm. You may need to play with it or force it, depending on your printer.
I'll iterate and change this item as needed.