Glass Print Display Wall Bracket (Thumb Tack) by MateoDSX 3d model
3dmdb logo
Thingiverse
Glass Print Display Wall Bracket (Thumb Tack) by MateoDSX

Glass Print Display Wall Bracket (Thumb Tack) by MateoDSX

by Thingiverse
Last crawled date: 3 years, 3 months ago
A quick wall mount I designed to reuse a mis-measured glass print bed and turn it into a display for prints! Just mirror this model in your slicer to print out the other side.
Designed it to adhere to the wall with thumb tacks for ease, you could easily use a screw and washer however, inner diameter of mounting holes are 10.1mm and 2mm
The length of the arms are 100mm, so this could work with any length of glass so long as the the depth is between 100mm and 150mm or so
I documented the design process and have more pictures at https://www.instagram.com/mateodsx/, but comment if you have further questions, happy to help!
Here's the glass I designed it for btw, you can likely find it cheaperhttps://www.amazon.com/gp/product/B077RSSRNF/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&th=1

Tags