Glass Clip system by randyf1965

Last crawled date: 3 years ago

This clip bolts to a 6MM plywood base and allow for 2 layers of cork insulation under the glass and silicone heating bed. The holes in the clamp are slotted to allow the clamp to change angles while clamping the glass to the bed
The bolts used are 6-32 x 1/2" to secure the clamp pad to the clip using a captured nut and 6-32 x 3/4" to secure the clip to the bed.
These allow a 220mm x 220mm piece of glass to be securely held on the print bed.