Warning. This content is not moderated and could be offensive.

Thingiverse

Glass clamp for heated beds by jammi

Glass clamp for heated beds by jammi

by Thingiverse

Get from Thingiverse

Last crawled date: 3 years, 1 month ago

The tolerances are a bit tight for some glass sizes and print settings on the original version, so I updated those with the version 2 files.
Bed clamps for 200x200mm to 230x200mm 4mm thick glass on 220x220mm 3.3mm thick heated beds. Print two each of A and B orientations to get pieces for four corners.
Screw guide for 230x200mm glass:
4x 15mm or longer M3 screws (16..18mm is optimal)
4x 10mm or longer M3 screws (6..8mm is optimal)
Screw guide for 220x200mm glass (print the 230x200mm model):
8x 15mm or longer M3 screws (16..18mm is optimal)
Screw guide for 210x200mm glass (print the 230x200mm model):
8x 15mm or longer M3 screws
Screw guide for 200x200mm glass:
8x 15mm or longer M3 screws (16..18mm is optimal)

Tags

heated beds glass clamp jammi

Similar models

15mm extrusion clamp by MrWhat

15mm extrusion clamp by MrWhat

...ince the tabs holding the main glass bed in place occupy those locations. the clamp needed to attach to the outside of the rail.

Ender 3 Quick Release Bed by david115599

Ender 3 Quick Release Bed by david115599

...david115599 thingiverse print 2x corner a print 1x corner b print 1x cornerbr print 4x clamp 4x m3 16mm screws 4x m3 nylock nuts

MPCNC Belt Tensioner (15mm GT2 Belt)

MPCNC Belt Tensioner (15mm GT2 Belt)

...stability. print: 4x corner_belttensioner_15mm_l 4x corner_belttensioner_15mm_r 8x beltclamp additional: 8x m4 nut 8x m4x35 screw

Heated bed glass mount clip by Toshik

Heated bed glass mount clip by Toshik

...openscad, rendered for 214x214mm heated bed and 200x200mm 4mm thick glass update 15.07.2014: added scad source fully customizable

Unifi - US-16-150W PSU Adapter by bonkersGER

Unifi - US-16-150W PSU Adapter by bonkersGER

...psu adapter to fit a meanwell epp-150-48 into a us-16-150w switch from unifi needed parts 4x m3 washers 8x m3 nuts 4x m3*8 screws

Print bed Frame for 2020 aluminium frame printer by Sjekkie

Print bed Frame for 2020 aluminium frame printer by Sjekkie

...cer m3x11 4x srew m3x40 4x m3 nuts endstop parts 2x m3x25 1x m3x20 3x m3 nuts all printed parts are printed with esum pla+ zilver

Glass Hotbed Holder Screws Anet A8 Proved! by Meganudelauflauf

Glass Hotbed Holder Screws Anet A8 Proved! by Meganudelauflauf

...stirnseiten geklemmt. 4x schraube m3x10 4x außensechskanntmutter m3 2x gedrucktes item https://www.thingiverse.com/thing:2366289

YAHexagonalHeatedBedHolder - "mind the solder joints" version by nmaggioni

YAHexagonalHeatedBedHolder - "mind the solder joints" version by nmaggioni

...x slightly larger washers to avoid the bolts sliding out of aluminium beams. see the post-printing section for more instructions.

Bed Level Thumb-wheel by Jb3designer

Bed Level Thumb-wheel by Jb3designer

...cise. in adittion, to complete the kit, you need these elements too: 4x screw m3x30 4x springs 8x nut m3 (optional) 4x washer m3

Slingshot new Version TTF by hara74

Slingshot new Version TTF by hara74

...ed it for ttf with clamps to attach still needed: 3x m3 16mm screw 3x m3 hexnut 4x m3 20mm screw 4x m3 washer 4x m3 butterfly nut

Search for 485005 Similar models

Jammi

Jammie Dodger Cookie Cutter by smartroad

Jammie Dodger Cookie Cutter by smartroad

...that it is a similar consistancy to the jam used in jammie dodgers. so with a shortbread recipe i made my own with these cutters.

Jammie Dodger Heart Cookie Cutter by cheesemcgee

Jammie Dodger Heart Cookie Cutter by cheesemcgee

... shaped jammie dodgers. i threw this together really quick and it worked perfect, thanks to mouserunner for his original design!

Jammie Dodger Cookie Cutter - BOUNCER !

Jammie Dodger Cookie Cutter - BOUNCER !

... boss it will speed up your work and get rid of your worries :p glue the handle to the body of the object with strong adhesive

Yet another M3 thumbnut for M3 nuts and bolts by jammi

Yet another M3 thumbnut for M3 nuts and bolts by jammi

...erse just another m3 thumb nut, rounded and feels nice. use these on hex nuts and bolt heads. heat the bolt or nut to insert it.

My drawing of Talon Tricopter with extra jammi by philsson

My drawing of Talon Tricopter with extra jammi by philsson

...ame. the parts in purple are the ones printed. using crius aio pro ask for upload of individual parts as total archive is to big.

SCSI2SD HD Mount by jammi

SCSI2SD HD Mount by jammi

...6-32 unc will be easier to use if you prime the printed holes with the screws before you mount the device in its case / computer.

Polygon Mesh Cat Bookend by jammi

Polygon Mesh Cat Bookend by jammi

...re print cooling or possibly slightly lower temperature, and finer k-value calibration (or retraction settings, if you use that).

5015 radial to 40mm axial fan adapter by jammi

5015 radial to 40mm axial fan adapter by jammi

... mount the adapter to where the fan would go with as many screws as you see fit. the alt version has the mounting arm vertically.

ReprapDiscount Desk Case by jammi

ReprapDiscount Desk Case by jammi

...pdate: reprapdiscount-plate-3.stl includes the mount and has all three foot parts in correct orientation, unlike previous plates.

Grooved bearing lever for the Titan extruders by jammi

Grooved bearing lever for the Titan extruders by jammi

...lament hard enough to make it jam. here's another similar model on thingiverse in case you don't have luck with this one.

Search for 15 Jammi models

Glass

Glass

...glass thingiverse wine glass

Glass corner for 5mm glass

Glass corner for 5mm glass

...glass corner for 5mm glass thingiverse fit 5mm glass on anet a6 heated bed.

Glasses protection / Sun glasses by 3DPhilou

Glasses protection / Sun glasses by 3DPhilou

...glasses protection / sun glasses by 3dphilou thingiverse glasses protection / sun glasses

MIERUNDES glasses on glasses stabilizer by INOUETAICHI

MIERUNDES glasses on glasses stabilizer by INOUETAICHI

...mierundes glasses on glasses stabilizer by inouetaichi thingiverse mierundes glasses on glasses stabilizerhttp://mierundes.com/

Google Glass to Glasses Adapter by DDRBoxman

Google Glass to Glasses Adapter by DDRBoxman

...google glass to glasses adapter by ddrboxman thingiverse hook up google glass to your glasses

Glasses

...glasses thingiverse i broke my glasses, so... why i cant design new one?

Glass Clip for 3mm glass by rdsail

Glass Clip for 3mm glass by rdsail

...glass clip for 3mm glass by rdsail thingiverse bed glass clip for 3mm glass it requires 3mm screw 10 or 12mm long and 3mm nut

Glasses by MakerAmit

Glasses by MakerAmit

...glasses by makeramit thingiverse glasses

glass by eezequielayala

glass by eezequielayala

...glass by eezequielayala thingiverse glass

glass by 24mrich

glass by 24mrich

...glass by 24mrich thingiverse glass

Search for 11222 Glass models

Clamp

Clamp

...clamp thingiverse clamp

Clamp

...clamp thingiverse clamp for vacform

Clamp by bexer

...clamp by bexer thingiverse clamp, one clamp for many possibilities!

clamp by kimduckkyo

clamp by kimduckkyo

...clamp by kimduckkyo thingiverse clamp

clamp by glukofinder

clamp by glukofinder

...clamp by glukofinder thingiverse clamp

Clamp Chain

...clamp chain thingiverse this is a clamp

Clamp by wslab

...clamp by wslab thingiverse clamp

CLAMP by leonk

...clamp by leonk thingiverse clamp

Clamp by jkorinek87

Clamp by jkorinek87

...clamp by jkorinek87 thingiverse clamp

Clamp by Emmanuelgnanasekar

Clamp by Emmanuelgnanasekar

...clamp by emmanuelgnanasekar thingiverse this thing is a clamp model , it can be used for soft clamping things

Search for 14891 Clamp models

Heated

NFS Heat

...nfs heat thingiverse nfs heat

heat by syalovitser

heat by syalovitser

...heat by syalovitser thingiverse the miami heat logo. made in printcraft. james,bosh and wade!

Heating Rosette by Achiim

Heating Rosette by Achiim

...ed stl is designed for standard heating sizes. but you can change the size of your heating rosette by changing the uploaded scad.

Heat bed 8x10 glass to 6x9 heat bed by hobbit1968

Heat bed 8x10 glass to 6x9 heat bed by hobbit1968

...heat bed 8x10 glass to 6x9 heat bed by hobbit1968 thingiverse heat bed, 8x10 glass to 6x9 heat bed.

Heat-Tower by JMDesigns

Heat-Tower by JMDesigns

...heat-tower by jmdesigns thingiverse heat-tower

heating key

...ey thingiverse this is a key to vent the heating in the house i hope you enjoy it. follow me in instagram for more: 3d_print2018

Heating faucet by Woodruff

Heating faucet by Woodruff

...heating faucet by woodruff thingiverse heating faucet replacement

Heated Bed by AnyWay

Heated Bed by AnyWay

...heated bed by anyway thingiverse simple heated bed.

Heat Bed to Heat Chamber Adapter-6 fan by 3DCDN

Heat Bed to Heat Chamber Adapter-6 fan by 3DCDN

...y 3dcdn thingiverse i made this adapter so that i could inject heat generated from my heat bed into the 3d printer heat chamber.

heat logo by LeeroyLeBG

...heat logo by leeroylebg thingiverse heat logo for 3d printer

Search for 15553 Heated models

Beds

bed by

...bed by thingiverse pink bed with a white pillow

Kossel Plus bed holder for aluminium bed with glass bed

Kossel Plus bed holder for aluminium bed with glass bed

...kossel plus bed holder for aluminium bed with glass bed thingiverse pla

bed by Syzguru11

bed by Syzguru11

...bed by syzguru11 thingiverse bed

bed by callsaul

bed by callsaul

...bed by callsaul thingiverse bed

BED by leonk

...bed by leonk thingiverse bed

Bed by FaserMok

Bed by FaserMok

...bed by fasermok thingiverse bed

Bed by alexdfox

Bed by alexdfox

...bed by alexdfox thingiverse bed maker

bed stanchion

...bed stanchion thingiverse top of a bed stanchion

bed by bhawkinscds

bed by bhawkinscds

...bed by bhawkinscds thingiverse four post bed

bed by EricG

...bed by ericg thingiverse bed by eric [created on 3dtin]

Search for 32736 Beds models