Thingiverse
Glass bed corner clips by lenknermj
by Thingiverse
Last crawled date: 3 years ago
After numerous failed designs, I've finally created some corner clips that keep a glass bed from shifting without the clip sitting on top of the glass surface itself in a Monoprice 11614 printer (Flashforge Creator Dual knockoff).
This design relies on you inserting an M3 nut into each of the tightening wheels you print.
I printed mine out of PETg simply because I like the flexibility and high temperatures it can withstand, but ABS would work, and PLA would probably be OK too, as long as you dont print with a very hot bed temp.
I printed mine solid as well just for the extra strength...you could probably print it with less plastic, but as I havent' TRIED that, I cannot confirm.
I am currently using 2 of these in opposing corners and they hold the glass perfectly still...no need for 4.
Also, you may want to print out a spacer to re-zero the Z axis sensor...like this http://www.thingiverse.com/thing:1332275
NOTE - in this case, I'm using an 1/8" piece of borosilicate glass (Pyrex). If you're using thicker or thinner (neither are recommended) then you will have to adjust the Z spacer as well as perhaps the thickness of the upper lip of the clip. The gap between the upper lip and the bottom may also have to be modified if your bed isn't approx 8mm thick from the top of the bed to the bottom of the circuit board.
This design relies on you inserting an M3 nut into each of the tightening wheels you print.
I printed mine out of PETg simply because I like the flexibility and high temperatures it can withstand, but ABS would work, and PLA would probably be OK too, as long as you dont print with a very hot bed temp.
I printed mine solid as well just for the extra strength...you could probably print it with less plastic, but as I havent' TRIED that, I cannot confirm.
I am currently using 2 of these in opposing corners and they hold the glass perfectly still...no need for 4.
Also, you may want to print out a spacer to re-zero the Z axis sensor...like this http://www.thingiverse.com/thing:1332275
NOTE - in this case, I'm using an 1/8" piece of borosilicate glass (Pyrex). If you're using thicker or thinner (neither are recommended) then you will have to adjust the Z spacer as well as perhaps the thickness of the upper lip of the clip. The gap between the upper lip and the bottom may also have to be modified if your bed isn't approx 8mm thick from the top of the bed to the bottom of the circuit board.
Similar models
thingiverse
free
CTC Printer Z-Axis spacer in 2,3,4,5mm for glass bed by vr50bt
... no fixings or gluing. just print the appropriate spacer and pop it over where the z stop contacts your bed assembly.
easy stuff!
thingiverse
free
Monoprice MP Select Mini 3D Printer glass bed Clips by tselling
...ommend printing just one clip and seeing how it fits and making modifications in customizer or openscad before printing them all!
thingiverse
free
Ender 3 Pro Glass Bed Clips by ItchyJuffoWup
...arp over time. eventually, i would recommend printing them with either petg or abs to withstand the constant heating and cooling.
thingiverse
free
Glass Bed Clamp for Printrbot Simple Metal w/ Heated Bed by stocktonrgs
...e. i printed it with 15% infill and a single 0.8mm perimeter, but it will probably work fine with your favorite settings as well.
thingiverse
free
Corner glass clip by PachezZ
...tween glass and clip.
i am using previous version (see photo) - 3 regular ones and one bigger with clip for bed wires underneath.
thingiverse
free
CR-10 Bed Clip for 12" glass by calebfwood
... on its side and does not require any support.
i recommend using 3 of the anchored bed clips and the 1 strain relief corner clip.
thingiverse
free
CR-10 z spacer by kevinb22
... vary understand what you re doing, i will not take blame for anybody that mods anything and doesnt measure the correct distance.
thingiverse
free
Bibo Glass Clamp with Optional Lip by Randyrw
... settings) version .stl which do not have the settings written on top or bottom of the clamps so it will print a little cleaner..
thingiverse
free
Clip for Holding down Glass + Bed + PEI + Cork by Tailslide
... thin as i could but if you have a bed levelling sensor or fan very close to the surface take care it doesn't bump the clips.
thingiverse
free
Z-AXIS REAR MOUNT Extensions with Spacers by kehlebracht
...p keep the pieces from wobbling while printing, probably overkill but i still added it.
use print settings from original sources.
Lenknermj
thingiverse
free
Tool and Card Organizer by lenknermj
...ator clone) printer. fits the allen keys that come with the printer, 8 sd cards, 2 part removal tools, and a pair of tweezers :)
thingiverse
free
Yet Another SD Card Holder by lenknermj
...rds, and i also wanted to be able to remove it and have it stand on it's own. kudos to the original maker on a solid design.
thingiverse
free
K Cup Dispenser by lenknermj
...base model. use whatever glue is recommended for the material you're printing with (i use hotglue for most everything...lol)
thingiverse
free
Z-Axis offset spacer for FlashForge Creator Dual/Monoprice 11614 - 1/8" glass by lenknermj
...me 1/8" borosilicate glass, and crafted this simply little spacer to offset the z- axis home switch to accomodate the glass.
thingiverse
free
Spectrophotometer Retention Device (for X-Rite Chroma4 and Chroma5 meters) by lenknermj
...till have yet to print this device in its entirety, so until i do, i'm leaving this listed as a "thing in progress"
thingiverse
free
Heavy scale X3D Ultibot by shivinteger
...[11] thing url : http://www.thingiverse.com/thing:1335783 [11] thing author : lenknermj [11] thing licence : creative commons - attribution [+]...
Glass
thingiverse
free
Glass
...glass
thingiverse
wine glass
thingiverse
free
Glass corner for 5mm glass
...glass corner for 5mm glass
thingiverse
fit 5mm glass on anet a6 heated bed.
thingiverse
free
Glasses protection / Sun glasses by 3DPhilou
...glasses protection / sun glasses by 3dphilou
thingiverse
glasses protection / sun glasses
thingiverse
free
MIERUNDES glasses on glasses stabilizer by INOUETAICHI
...mierundes glasses on glasses stabilizer by inouetaichi
thingiverse
mierundes glasses on glasses stabilizerhttp://mierundes.com/
thingiverse
free
Google Glass to Glasses Adapter by DDRBoxman
...google glass to glasses adapter by ddrboxman
thingiverse
hook up google glass to your glasses
thingiverse
free
Glasses
...glasses
thingiverse
i broke my glasses, so... why i cant design new one?
thingiverse
free
Glass Clip for 3mm glass by rdsail
...glass clip for 3mm glass by rdsail
thingiverse
bed glass clip for 3mm glass
it requires 3mm screw 10 or 12mm long and 3mm nut
thingiverse
free
Glasses by MakerAmit
...glasses by makeramit
thingiverse
glasses
thingiverse
free
glass by eezequielayala
...glass by eezequielayala
thingiverse
glass
thingiverse
free
glass by 24mrich
...glass by 24mrich
thingiverse
glass
Corner
thingiverse
free
corner by gazknight
...corner by gazknight
thingiverse
corner
thingiverse
free
corner by ashli
...corner by ashli
thingiverse
corner
thingiverse
free
corner protector
...corner protector
thingiverse
corner protector
thingiverse
free
corner by pauluxlebidouilleure
...corner by pauluxlebidouilleure
thingiverse
corner for fixation
thingiverse
free
Corner by jamesdeb
...corner by jamesdeb
thingiverse
confirmation corner
thingiverse
free
Corner (customizable)
...corner (customizable)
thingiverse
a corner of customizable sizes.
thingiverse
free
corners by Rimom
...corners by rimom
thingiverse
corners to build an enclosure
thingiverse
free
Corner by Mika1Ove
...corner by mika1ove
thingiverse
corner 145mm x 20mm
thingiverse
free
Corner Holder
...corner holder
thingiverse
simple corner holder for wood fraiming
thingiverse
free
Corner Shelf
...corner shelf
thingiverse
this is a shelf for a corner that can be mounted with construction glue.
Bed
thingiverse
free
bed by
...bed by
thingiverse
pink bed with a white pillow
thingiverse
free
Kossel Plus bed holder for aluminium bed with glass bed
...kossel plus bed holder for aluminium bed with glass bed
thingiverse
pla
thingiverse
free
bed by Syzguru11
...bed by syzguru11
thingiverse
bed
thingiverse
free
bed by callsaul
...bed by callsaul
thingiverse
bed
thingiverse
free
BED by leonk
...bed by leonk
thingiverse
bed
thingiverse
free
Bed by FaserMok
...bed by fasermok
thingiverse
bed
thingiverse
free
Bed by alexdfox
...bed by alexdfox
thingiverse
bed maker
thingiverse
free
bed stanchion
...bed stanchion
thingiverse
top of a bed stanchion
thingiverse
free
bed by bhawkinscds
...bed by bhawkinscds
thingiverse
four post bed
thingiverse
free
bed by EricG
...bed by ericg
thingiverse
bed by eric [created on 3dtin]
Clips
thingiverse
free
Clip
...clip
thingiverse
clip.
thingiverse
free
Meta Clips: Parametric Round Clips... with a clip! by hugomatic
...meta clips: parametric round clips... with a clip! by hugomatic
thingiverse
sometimes your clips need clipping too.
thingiverse
free
clip
...clip
thingiverse
clip for screen door screen install
thingiverse
free
SanDisk Clip Zip Clip by inflam52
...sandisk clip zip clip by inflam52
thingiverse
sandisk clip zip clip
thingiverse
free
Desk clip cable clip by Kexei
...desk clip cable clip by kexei
thingiverse
clip this on a side of your desk to clip cables
thingiverse
free
Sansa Clip Clip by BrayChristopher
...r up the volume controls, but the screen and the front buttons are still accessible.
i also uploaded some of my earlier concepts.
thingiverse
free
Sansa Clip clip by Pr0nboy
...nk it is functional. this was designed for the original sansa clip, i don't know whether this will work with the clip+ series
thingiverse
free
Clip
...clip
thingiverse
this clip helps mark where a child's height is on a tape measure.
thingiverse
free
CLIP
...clip
thingiverse
.
thingiverse
free
Clip for SanDisk Sansa Clip+ by oet
...clip for sandisk sansa clip+ by oet
thingiverse
i broke the clip on my sansa clip+ mp3 player so i created a new one.