Gladiator Rail Cleat by sturm451 3d model
3dmdb logo
Thingiverse
Gladiator Rail Cleat by sturm451

Gladiator Rail Cleat by sturm451

by Thingiverse
Last crawled date: 3 years ago
This cleat is for the trail rail system on the Jeep Gladiator. It has the bumps to slot into the groves in the rails.
Hardware required are an M8 T-Nut 25mm, 20mm wide spring approximately 20-25mm long and an M8 thread insert. All are pictured for reference.
I printed mine in Nylon-G from Matterhackers.

Tags