Thingiverse
GIRO.ETS - BLTouch Mount
by Thingiverse
Last crawled date: 4 years, 3 months ago
GIRO.ETS - BLTouch Mount
General
This bracket was designed to be mounted on top of the hotend enclosure. The BLTouch should be mounted facing the right side and the cables should be pulled through the longhole in the bracket.
You will need additional screws, nuts and washers for the mounting of bracket. The needed parts are mentioned below.
Additional screws, nuts and washers per bracket
2x M3x5 or 2x M3x10
Printing
I would recommend to use 2 or more perimeters. Print with a lower speed, for example 40 mm/s, to get a more accurate printing. I recommend to print the bracket with at least 50% infill.
Firmware adjustments
To set the accurate position of the BLTouch within the firmware it is necessary to adjust the position of the probe offset within the firmware. The following code is an example for the Marlin firmware.
#define X_PROBE_OFFSET_FROM_EXTRUDER 29
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0
#define Z_PROBE_OFFSET_FROM_EXTRUDER -1.2
Additional Information
Let me know if there are any kind of problems with the bracket. I will try to help and if neccessary correct the design. I appreciate any kind of feedback to this bracket.
If you like my work and find it really usefull then I would be very happy if you give me a small tip as an appreciation for my work.
General
This bracket was designed to be mounted on top of the hotend enclosure. The BLTouch should be mounted facing the right side and the cables should be pulled through the longhole in the bracket.
You will need additional screws, nuts and washers for the mounting of bracket. The needed parts are mentioned below.
Additional screws, nuts and washers per bracket
2x M3x5 or 2x M3x10
Printing
I would recommend to use 2 or more perimeters. Print with a lower speed, for example 40 mm/s, to get a more accurate printing. I recommend to print the bracket with at least 50% infill.
Firmware adjustments
To set the accurate position of the BLTouch within the firmware it is necessary to adjust the position of the probe offset within the firmware. The following code is an example for the Marlin firmware.
#define X_PROBE_OFFSET_FROM_EXTRUDER 29
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0
#define Z_PROBE_OFFSET_FROM_EXTRUDER -1.2
Additional Information
Let me know if there are any kind of problems with the bracket. I will try to help and if neccessary correct the design. I appreciate any kind of feedback to this bracket.
If you like my work and find it really usefull then I would be very happy if you give me a small tip as an appreciation for my work.
Similar models
thingiverse
free
GIRO.ETS - 608 Ball Bearing Z-Rod Stabilisation
...you like my work and find it really usefull then i would be very happy if you give me a small tip as an appreciation for my work.
thingiverse
free
GIRO.ETS - 5015 Radial Fan Bracket
...you like my work and find it really usefull then i would be very happy if you give me a small tip as an appreciation for my work.
thingiverse
free
GIRO.remix - TEVO Tarantula / 30mm Fan BLTouch Mount by Keromida
...y usefull then i would be very happy if you give me a small tip as an appreciation for my work. for all of you who gave me a tip.
thingiverse
free
BLTouch Probe Mount for Sheawa Mount plate by mtngeek
... processing needed.
to mount on the plate:
2x m3x6 button-head screws
to mount the bltouch
2x m3x12 button-head screws
2x m3 nuts
thingiverse
free
Combined BLTouch and Probe Mount (Step and Fusion360) by Print2Win
... probe,
1x m3 washer + 1x m3x8 screw for mounting the bltouch protector and
2x m3x8 screws to mount the assembly to the fan duct.
thingiverse
free
Ender 3 v2 3DTouch / BLTouch Mount Ender 3v2 by ci3jk4_FPV
...
i'm using the smith3d bltouch firmware and it works well but if you really want to adjust it then probe offset is: x-42,y-5.
thingiverse
free
Anet A8 3dTouch rear mount by matsondawson
... update your firmware, see here:
http://www.thingiverse.com/thing:2091529
tinkercad link:https://tinkercad.com/things/16dh38tc7vw
thingiverse
free
AM8/E3D Hemera BLTouch Adjustable Front Mount
... use at your own risk... :)
if you have comments, questions or recommendations for any modifications on the design, let me know.
thingiverse
free
GIRO - Titan Extruder Bracket by Keromida
...y usefull then i would be very happy if you give me a small tip as an appreciation for my work. for all of you who gave me a tip.
thingiverse
free
BLTouch bracket - Ender 3 MAX by strangecalling
...screws and optional washers.
suggest printing in abs or petg incase you plan to print with higher temp filaments in an enclosure.
Giro
design_connected
$16
Giro
...giro
designconnected
lapalma giro computer generated 3d model. designed by bortolani, fabio.
3ddd
$1
Lapalma Giro
...lapalma giro
3ddd
lapalma , giro
lapalma giro stool
3ddd
free
F30 Giro
...f30 giro
3ddd
fabbian , giro
диаметр - 85см
turbosquid
free
Giros
...ee 3d model giros for download as 3ds, max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1452838)
3ddd
$1
vibia giro
...vibia giro
3ddd
vibia
торшер и настольная лампа vibia giro
3ddd
$1
Trento - giro - wg020
...trento - giro - wg020
3ddd
trento - giro - wg020
3ddd
$1
Пуф Giro, Casamania
... casamania
http://www.archiproducts.com/ru/продукты/106487/upholsteries-contemporary-пуф-giro-casamania.html
turbosquid
$11
Giro Favourite
...ree 3d model giro favourite for download as max, max, and fbx on turbosquid: 3d models for games, architecture, videos. (1651047)
3ddd
free
Maseiro / Giro
...maseiro / giro
3ddd
maseiro
современная люстра
3ddd
$1
ODEA Giro V2
...aeco , кофемашина
габариты (ширина х высота х глубина): 290 x 385 x 370 мм
odea giro v2
Bltouch
thingiverse
free
Support bltouch by TonyJ
...support bltouch by tonyj
thingiverse
support bltouch
thingiverse
free
BLTOUCH for MICRON3DP by lamerhouse
...bltouch for micron3dp by lamerhouse
thingiverse
bltouch for micron3dp
thingiverse
free
SapphirePro mount for Bltouch
...sapphirepro mount for bltouch
thingiverse
sapphirepro mount for bltouch
thingiverse
free
ender6 BLtouch by chimaer
...ender6 bltouch by chimaer
thingiverse
ender6 bltouch
this is an external bracket
thingiverse
free
BLTouch KP3s by 1devilman1
...bltouch kp3s by 1devilman1
thingiverse
bltouch mount for kingroon kp3s
thingiverse
free
Bltouch support adjustable
...bltouch support adjustable
thingiverse
adjustable support for bltouch, p3steel.
thingiverse
free
BMG NEREUS BLTOUCH
...bmg nereus bltouch
thingiverse
petg
m3 screws and nuts for the bltouch
thingiverse
free
BLTouch Bracket by tidh666
...bltouch bracket by tidh666
thingiverse
serves to attach the bltouch sensor to the extruders
thingiverse
free
bltouch mount by wars
...bltouch mount by wars
thingiverse
reinforced bracket for bltouch cooperates with high_clearance_cr10_oem_fang_mod
thingiverse
free
BLTouch Holder by Jonthan06
...bltouch holder by jonthan06
thingiverse
support bltouch pour wanhao d12
Ets
turbosquid
$5
ET
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Provence-et-fils / Kathrine
...-fils / kathrine
3ddd
provence-et-fils , прованс
кресло kathrine, фирма provence-et-fils
3ddd
$1
Cristal Et Bronze Dune
... dune , смеситель
смеситель cristal et bronze dune
3ddd
$1
Trimer Villager ET 500
...trimer villager et 500
3ddd
газонокосилка
trimer villager et 500
3ddd
$1
Cristal et Bronze / Volga
...cristal et bronze / volga
3ddd
cristal et bronze , смеситель
арт. 25462
3ddd
$1
Cristal et Bronze / Volga
...cristal et bronze / volga
3ddd
cristal et bronze , смеситель
для биде; арт. 25469
3ddd
$1
Cristal et bronze Dune
...ristal et bronze dune
3ddd
dune , смеситель
смесители crstal et bronze из коллекции dune
3ddd
$1
Cristal Et Bronze Dune 3
... dune , смеситель
смеситель cristal et bronze dune на три отверстия
3ddd
$1
Auberlet et Laurent
...auberlet et laurent
3ddd
лепной декор на стеновую панель.
3ddd
free
Auberlet et Laurent
...auberlet et laurent
3ddd
лепной декор на стеновую панель
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)