Gigahorse-esque kit for gaslands/hotwheels

Last crawled date: 4 years, 2 months ago

Kit to make a gigahorse style car. Print one of the main file (gigihoss) and then choose your engine from 4x v8 engines, 2x jet engines, or a nuclear reactor. (nuke engine wants supports, the rest print without). You can also ignore the engines and just use this as a monster truck kit.
Assembly is not terribly easy(especially to keep level and square), but it does allow a LOT of freedom with where things are placed, frame angles, suspension positions, etc.
Parts notes:
The 2 short and two long square pieces are the leading and trailing arms and glue to the inside of the body side flaps, cut as needed.
the driveshaft should be glued to the diff first with the angled end turned to glue to the bottom of the frame
Gas tanks glue to the sides of the body flaps
pyramid piece is the mount for the front suspension uprights, there is a small notch on the frame to locate it.
-the flat disks are spacers for between the rear tractor wheels