Ghostbusters Proton Pack Neutron Thrower by MileyORiley

Last crawled date: 3 years ago

PART OF FULL PROTON PACK BUILD
Pack: https://www.thingiverse.com/thing:2479141
This is the Neutron Thrower from my 3D printed Ghostbusters Proton Pack build.
The prop was made using various measurements from the gbfans.com wiki. Changes were made to have it 3D print easily, and space was made inside for all the electronics.
Inside is an arduino, which powers the lights. There is a sound board for the SFX, which is toggled be a small set of relays.
The output of the sound in the video below is connected to speakers. In the finished prop all of the wiring went down the hose and connected to power and speakers in the Proton Pack itself.
With this item I have included a parts list which should help you out, it's honestly not that hard to assemble. Pretty much all of the parts should print flat on the bed and only the Gun Body Main part will need support material. Everything else can be orientated to be printed without.
The prop is designed with holes for lenses, LEDs, switches and wires to be attached. All the holes are of a standard size which I'll list in the post printing section.