Get Shifty! USB Sequential gear shifter, for Asetto corsa, Dirt 3, all racing games! by jjamieallen

Last crawled date: 3 years ago

Hi there Folks! This is Shifty, my first larger project on thingiverse.
Shifty is a 2 position sequential gear shifter for rally and race simulators, dirt 3, assetto corsa, and others.
It uses an Arduino pro Micro as a HID input device. No coding is required! Super simple assembly.
Parts List:
3 x 45mm m3 bolts
2 x 70mm m8 bolts
4 x 20mm m2 self tapping wood screws
2 x m8 nuts
3 x m3 nuts
6 x m3 washer
4 x m2 washer
2 x 25mm x 5 x 5 springs (choose your own strength)
2 x Micro switch with roller (~15 x 25mm without contacts)
1 x Arduino pro micro, genuine or clone
small amount of wire.
3D parts list
1 x box
1 x cover
1 x handle
1 x stick
1 x foot
1 x handle
warning, this will ONLY FIT ON TABLES THINNER THAN 1.8 CM!
For the Arduino Pro Micro:
Solder the switches to pins 8, and 9, and obviously the other sides of the switch to ground.
Then use this short arduino sketch: http://puu.sh/vl936/cdfc35ba9d.ino
Feedback welcomed and encouraged.