Geometric Fox by ozgurcoteli

Last crawled date: 3 years, 1 month ago

I created gcode file on KISSlicer
KISSlicer - FREE
; Windows
; version 1.4.5.10
; Built: Sep 2 2014, 20:17:43
; Running on 8 cores
;
; Saved: Thu Mar 29 12:40:40 2018
; 'fox geometrik.gcode'
;
; Printer Settings
;
; printer_name = Ozgur of RepRap
; bed_STL_filename =
; extension = gcode
; cost_per_hour = 2.5
; post_process = NULL
; every_N_layers = 0
; num_extruders = 1
; firmware_type = 2
; add_comments = 1
; fan_on = M106
; fan_off = M107
; fan_pwm = 1
; add_m101_g10 = 0
; z_speed_mm_per_s = 10
; z_settle_mm = 0
; bed_size_x_mm = 200
; bed_size_y_mm = 200
; bed_size_z_mm = 180
; ext_radius = 0
; bed_offset_x_mm = 100
; bed_offset_y_mm = 100
; bed_offset_z_mm = 0
; bed_roughness_mm = 0
; round_bed = 0
; travel_speed_mm_per_s = 100
; first_layer_speed_mm_per_s = 35
; dmax_per_layer_mm_per_s = 30
; xy_accel_mm_per_s_per_s = 1000
; xy_steps_per_mm = 150
; lo_speed_perim_mm_per_s = 10
; lo_speed_solid_mm_per_s = 20
; lo_speed_sparse_mm_per_s = 30
; hi_speed_perim_mm_per_s = 70
; hi_speed_solid_mm_per_s = 80
; hi_speed_sparse_mm_per_s = 90
; ext_gain_1 = 1
; ext_material_1 = 8
; ext_axis_1 = 0
; ext_gain_2 = 1
; ext_material_2 = 0
; ext_axis_2 = 0
; ext_Xoff_2 = 0
; ext_Yoff_2 = 0
; ext_gain_3 = 1
; ext_material_3 = 0
; ext_axis_3 = 0
; ext_Xoff_3 = 0
; ext_Yoff_3 = 0
; ext_gain_4 = 1
; ext_material_4 = 0
; ext_axis_4 = 0
; ext_Xoff_4 = 0
; ext_Yoff_4 = 0
; model_ext = 0
; support_ext = 0
; support_body_ext = 0
; raft_ext = 0
; solid_loop_overlap_fraction = 1
;
; Material Settings for Extruder 1
;
; material_name = Copy of PLA
; g_code_matl = 3B204D617962652073657420736F6D65206D6174657269
; 616C2D737065636966696320472D636F64653F
; fan_Z_mm = 0.7
; fan_loops_percent = 100
; fan_inside_percent = 100
; fan_cool_percent = 100
; temperature_C = 210
; keep_warm_C = 120
; first_layer_C = 210
; bed_C = 0
; sec_per_C_per_C = 0.00964207
; flow_min_mm3_per_s = 0.1
; flow_max_mm3_per_s = 20
; destring_suck = 5
; destring_prime = 5.2
; destring_min_mm = 2
; destring_trigger_mm = 50
; destring_speed_mm_per_s = 80
; Z_lift_mm = 0.2
; min_layer_time_s = 10
; wipe_mm = 6
; cost_per_cm3 = 0.128
; flowrate_tweak = 1
; fiber_dia_mm = 1.75
; color = 4294967040
;
; Style Settings
;
; style_name = Ozgur RepRap
; layer_thickness_mm = 0.2
; extrusion_width_mm = 0.3
; num_loops = 2
; skin_thickness_mm = 0.8
; infill_extrusion_width = 0.32
; infill_density_denominator = 0
; stacked_layers = 1
; use_destring = 1
; use_wipe = 1
; loops_insideout = 1
; infill_st_oct_rnd = 1
; inset_surface_xy_mm = 0
; seam_jitter_degrees = 0
; seam_depth_scaler = 0.8
; seam_gap_scaler = 1
; seam_angle_degrees = 45
;
; Support Settings
;
; support_name = ozgur sample support
; support_sheathe = 0
; support_density = 0
; solid_interface = 0
; support_inflate_mm = 0
; support_gap_mm = 0.5
; support_angle_deg = 80
; support_z_max_mm = -1
; sheathe_z_max_mm = -1
; raft_mode = 1
; prime_pillar_mode = 0
; raft_inflate_mm = 1
; brim_mm = 5
; brim_ht_mm = 0.2
; brim_fillet = 1
;
; Actual Slicing Settings As Used
;
; layer_thickness_mm = 0.2
; extrusion_width = 0.3
; num_ISOs = 2
; wall_thickness = 0.8
; infill_style = 1
; support_style = 0
; solid_interface = 0
; support_angle = 79.9
; destring_min_mm = 2
; stacked_infill_layers = 1
; raft_style = 1
; extra_raft_depth = 0
; oversample_res_mm = 0.125
; crowning_threshold_mm = 1
; loops_insideout = 1
; solid_loop_overlap_fraction = 1
; inflate_raft_mm = 1
; inflate_support_mm = 0
; model_support_gap_mm = 0.5
; brim_mm = 5
; brim_ht_mm = 0.2
; infill_st_oct_rnd = 1
; support_Z_max_mm = 1e+020
; sheathe_Z_max_mm = 0
; inset_surface_xy_mm = 0
; seam_jitter_degrees = 0
; seam_depth_scaler = 0.8
; seam_gap_scaler = 1
; seam_angle_degrees = 45
; Speed vs Quality = 0.50
; Perimeter Speed = 40.00
; Solid Speed = 50.00
; Sparse Speed = 60.00
;
; G-code Prefix